Re: [hylafax-users] Hdlc frame too short

["john andrews" <ml@irelandin1.com>]

Hi Lee,

thanks for your answer,


I have since tried to send a message to a HP Officejet series 600 fax -
which logs the transmission as:

Station ID			Pages           Status
NothingSetup            1               Error: Communication error


here are some log excerpts from hylafax (for this side of the converation):

TRaining worked:

May 14 18:45:34.53: [25394]: SEND training at v.17 14400 bit/s
May 14 18:45:34.53: [25394]: <-- [9:AT+FTH=3\r]
May 14 18:45:34.58: [25394]: --> [7:CONNECT]
May 14 18:45:34.58: [25394]: <-- HDLC<23:FF C0 C2 0E AE 2E A6 CA E6 76 96 16
2E F6 72 04 04 04 04 04 04 04 04>
May 14 18:45:34.61: [25394]: --> [7:CONNECT]
May 14 18:45:34.61: [25394]: <-- HDLC<6:FF C8 C1 00 47 10>
May 14 18:45:36.78: [25394]: --> [2:OK]
May 14 18:45:36.78: [25394]: DELAY 70 ms
May 14 18:45:36.85: [25394]: <-- [11:AT+FTM=145\r]
May 14 18:45:38.53: [25394]: --> [7:CONNECT]
May 14 18:45:40.09: [25394]: --> [2:OK]
May 14 18:45:40.09: [25394]: <-- [9:AT+FRH=3\r]
May 14 18:45:40.31: [25394]: --> [7:CONNECT]
May 14 18:45:41.33: [25394]: --> HDLC<5:FF C8 21 57 BE>
May 14 18:45:41.36: [25394]: --> [2:OK]
May 14 18:45:41.36: [25394]: TRAINING succeeded


but later on there is a problem:

May 14 18:46:35.00: [25394]: SEND send EOP (no more pages or documents)
May 14 18:46:35.00: [25394]: <-- [9:AT+FTH=3\r]
May 14 18:46:35.05: [25394]: --> [7:CONNECT]
May 14 18:46:35.05: [25394]: <-- HDLC<3:FF C8 F4>
May 14 18:46:36.37: [25394]: --> [2:OK]
May 14 18:46:36.37: [25394]: <-- [9:AT+FRH=3\r]
May 14 18:46:39.47: [25394]: --> [0:]
May 14 18:46:39.47: [25394]: MODEM <Empty line>
May 14 18:46:39.67: [25394]: MODEM <Timeout>

Failure Status:

        Status: No response to MPS or EOP repeated 3 tries; Giving up after
3 attempts to send same page
       Dialogs: 3 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 3 (total phone calls placed)
         Pages: 0 (pages transmitted)
      TotPages: 1 (total pages to transmit)
      Attempts: 3 (attempts to send current page)
        Dirnum: 0 (directory of next page to send)

-----Original Message-----
From: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Lee Howard
Sent: 14 May 2003 15:42
To: john andrews
Cc: hylafax-users@hylafax.org
Subject: Re: [hylafax-users] Hdlc frame too short


On 2003.05.14 00:30 john andrews wrote:
> I have the a problem when trying to send a fax to my local fax
> machine. I
> keep getting HDLC frame too short messages. However I have been able
> to
> receive faxes from the same fax machine. Is this likely to be a
> problem with
> my setup, the modem or the receiving fax machine. Could anyone advise
> me on
> how to solve this?
>
> Thanks
>
> John Andrews
>
> Details and logs (also an efax log):
>
> HylaFAX version 4.1.5
> linux Mandrake 9.1
> class 1 modem: TP560 Data/Fax/Voice 56K Modem
>
> receiving fax machine is an OKIFAX 4100
>
> Thank John
>
> May 13 17:20:41.44: [ 5256]: DIAL xxxxxxx
> May 13 17:20:41.44: [ 5256]: <-- [12:ATDTxxxxxxx\r]
> May 13 17:20:54.46: [ 5256]: --> [7:CONNECT]
> May 13 17:20:57.33: [ 5256]: --> [2:OK]
> May 13 17:20:57.33: [ 5256]: HDLC frame too short (0 bytes)

This HDLC frame is either supposed to be NSF, CSI, or DIS (commonly).
Try configuring your "Station Identification" on your Okifax first, and
then try again.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*