Re: [hylafax-users] Hdlc frame too short

[Lee Howard <faxguy@howardsilvan.com>]

On 2003.05.14 00:30 john andrews wrote:
> I have the a problem when trying to send a fax to my local fax
> machine. I
> keep getting HDLC frame too short messages. However I have been able
> to
> receive faxes from the same fax machine. Is this likely to be a
> problem with
> my setup, the modem or the receiving fax machine. Could anyone advise
> me on
> how to solve this?
> 
> Thanks
> 
> John Andrews
> 
> Details and logs (also an efax log):
> 
> HylaFAX version 4.1.5
> linux Mandrake 9.1
> class 1 modem: TP560 Data/Fax/Voice 56K Modem
> 
> receiving fax machine is an OKIFAX 4100
> 
> Thank John
> 
> May 13 17:20:41.44: [ 5256]: DIAL xxxxxxx
> May 13 17:20:41.44: [ 5256]: <-- [12:ATDTxxxxxxx\r]
> May 13 17:20:54.46: [ 5256]: --> [7:CONNECT]
> May 13 17:20:57.33: [ 5256]: --> [2:OK]
> May 13 17:20:57.33: [ 5256]: HDLC frame too short (0 bytes)

This HDLC frame is either supposed to be NSF, CSI, or DIS (commonly).  
Try configuring your "Station Identification" on your Okifax first, and 
then try again.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*