 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Class1 vs. Class2
- To: Lee Howard <faxguy@howardsilvan.com>
- Subject: Re: [hylafax-users] Class1 vs. Class2
- From: "John Darrington" <john@cellform.com.au>
- Cc: hylafax-users@hylafax.org
- Date: Sun, 5 Jan 2003 09:46:44 +0800
OK.
Two logs attached. The first with the default logging level, the
second with very verbose logging.
J'
On Sat, Jan 04, 2003 at 08:31:51AM -0800, Lee Howard wrote:
On 2003.01.04 01:33 John Darrington wrote:
>On Fri, Jan 03, 2003 at 11:46:55PM -0800, Lee Howard wrote:
>
> It shouldn't take you weeks to figure out how to make Class 1
>work both
> ways.
>
>Well I spent about 5 hours on it, and it was starting to irk me.
>Basically, in class1 mode. it transmits the first page, and then
>complains about no response to EOP. Yes, I checked the archives about
>this kind problem and tried all the suggestions, but to no
>avail. Version 1.1.4 btw.
A log is always useful.
Lee.
--
PGP Public key ID: 1024D/2DE827B3
fingerprint = 8797 A26D 0854 2EAB 0285 A290 8A67 719C 2DE8 27B3
See http://www.keyserver.net or any PGP keyserver for public key.
Jan 3 09:24:54 freyja FaxGetty[3645]: STATE CHANGE: RUNNING -> LISTENING Jan 3 09:24:54 freyja FaxQueuer[3639]: MODEM ttyS2: BUSY Jan 3 09:25:03 freyja FaxGetty[3645]: STATE CHANGE: LISTENING -> ANSWERING Jan 3 09:25:03 freyja FaxQueuer[3639]: MODEM ttyS2: COMID 00000006 Jan 3 09:25:09 freyja FaxGetty[3645]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS2' Jan 3 09:25:35 freyja FaxGetty[3645]: RECV FAX (00000006): from <UNSPECIFIED>, page 1 in 0:19, INF, 3.85 line/mm, 2-D MR, 14400 bit/s Jan 3 09:25:35 freyja FaxGetty[3645]: RECV FAX (00000006): recvq/fax00006.tif from <UNSPECIFIED>, route to <unspecified>, 1 pages in 0:26 Jan 3 09:25:37 freyja FaxGetty[3645]: RECV FAX: bin/faxrcvd "recvq/fax00006.tif" "ttyS2" "00000006" "" "" "" Jan 3 09:25:38 freyja FaxQueuer[3639]: MODEM ttyS2: COMID Jan 3 09:25:49 freyja FaxGetty[3645]: MODEM ROCKWELL RC288DPi/V1.600-V34_DP Jan 3 09:25:49 freyja FaxGetty[3645]: STATE CHANGE: RECEIVING -> RUNNING Jan 3 09:25:49 freyja FaxQueuer[3639]: MODEM ttyS2: READY, capabilities P3fc3e7ff:ff Jan 3 10:08:00 freyja FaxQueuer[3639]: SUBMIT JOB 1 Jan 3 10:08:08 freyja FaxGetty[3645]: ANSWER: Can not lock modem device Jan 3 10:08:08 freyja FaxGetty[3645]: STATE CHANGE: RUNNING -> LOCKWAIT (timeout 30) Jan 3 10:08:08 freyja FaxQueuer[3639]: MODEM ttyS2: BUSY Jan 3 10:08:15 freyja FaxSend[7496]: MODEM ROCKWELL RC288DPi/V1.600-V34_DP Jan 3 10:08:15 freyja FaxSend[7496]: STATE CHANGE: BASE -> RUNNING Jan 3 10:08:15 freyja FaxSend[7496]: SEND FAX: JOB 1 DEST 92771080 COMMID 00000007 DEVICE '/dev/ttyS2' Jan 3 10:09:17 freyja FaxGetty[3645]: MODEM ROCKWELL RC288DPi/V1.600-V34_DP Jan 3 10:09:17 freyja FaxGetty[3645]: STATE CHANGE: LOCKWAIT -> RUNNING Jan 3 10:09:17 freyja FaxQueuer[3639]: MODEM ttyS2: READY, capabilities P3fc3e7ff:ff Jan 3 10:10:03 freyja FaxGetty[3645]: ANSWER: Can not lock modem device Jan 3 10:10:03 freyja FaxGetty[3645]: STATE CHANGE: RUNNING -> LOCKWAIT (timeout 30) Jan 3 10:10:03 freyja FaxQueuer[3639]: MODEM ttyS2: BUSY Jan 3 10:10:10 freyja FaxSend[7507]: MODEM ROCKWELL RC288DPi/V1.600-V34_DP Jan 3 10:10:10 freyja FaxSend[7507]: STATE CHANGE: BASE -> RUNNING Jan 3 10:10:10 freyja FaxSend[7507]: SEND FAX: JOB 1 DEST 92771080 COMMID 00000008 DEVICE '/dev/ttyS2' Jan 3 10:11:12 freyja FaxGetty[3645]: MODEM ROCKWELL RC288DPi/V1.600-V34_DP Jan 3 10:11:12 freyja FaxGetty[3645]: STATE CHANGE: LOCKWAIT -> RUNNING Jan 3 10:11:12 freyja FaxQueuer[3639]: MODEM ttyS2: READY, capabilities P3fc3e7ff:ff Jan 3 10:11:59 freyja FaxGetty[3645]: ANSWER: Can not lock modem device Jan 3 10:11:59 freyja FaxGetty[3645]: STATE CHANGE: RUNNING -> LOCKWAIT (timeout 30) Jan 3 10:11:59 freyja FaxQueuer[3639]: MODEM ttyS2: BUSY Jan 3 10:12:05 freyja FaxSend[7531]: MODEM ROCKWELL RC288DPi/V1.600-V34_DP Jan 3 10:12:05 freyja FaxSend[7531]: STATE CHANGE: BASE -> RUNNING Jan 3 10:12:05 freyja FaxSend[7531]: SEND FAX: JOB 1 DEST 92771080 COMMID 00000009 DEVICE '/dev/ttyS2' Jan 3 10:12:17 freyja FaxQueuer[3639]: SUBMIT JOB 2 Jan 3 10:12:50 freyja FaxSend[7531]: SEND: No response to MPS or EOP repeated 3 tries; Giving up after 3 attempts to send same page "docq/doc1.cover;00", dirnum 0 Jan 3 10:12:52 freyja FaxQueuer[3639]: NOTIFY: bin/notify "doneq/q1" "failed" "0:57"
Jan 3 13:20:45 freyja FaxSend[9148]: servertracing = 0x0ffff (line 47) Jan 3 13:20:45 freyja FaxSend[9148]: sessiontracing = 0x0fff (line 48) Jan 3 13:20:45 freyja FaxSend[9148]: recvfilemode = 0640 (line 49) Jan 3 13:20:45 freyja FaxSend[9148]: logfilemode = 0640 (line 50) Jan 3 13:20:45 freyja FaxSend[9148]: devicemode = 0660 (line 51) Jan 3 13:20:45 freyja FaxSend[9148]: Unknown configuration parameter "ringsbeforeanswer" ignored at line 52 Jan 3 13:20:45 freyja FaxSend[9148]: speakervolume = off (line 53) Jan 3 13:20:45 freyja FaxSend[9148]: Unknown configuration parameter "gettyargs" ignored at line 54 Jan 3 13:20:45 freyja FaxSend[9148]: localidentifier = Cellform (line 55) Jan 3 13:20:45 freyja FaxSend[9148]: taglineformat = From %%l|%c|Page %%P of %%T (line 56) Jan 3 13:20:45 freyja FaxSend[9148]: maxrecvpages = 25 (line 57) Jan 3 13:20:45 freyja FaxSend[9148]: modemtype = Class1 (line 63) Jan 3 13:20:45 freyja FaxSend[9148]: modemrate = 38400 (line 64) Jan 3 13:20:45 freyja FaxSend[9148]: modemflowcontrol = rtscts (line 65) Jan 3 13:20:45 freyja FaxSend[9148]: modemnoflowcmd = AT&K0 (line 67) Jan 3 13:20:45 freyja FaxSend[9148]: modemhardflowcmd = AT&K3 (line 68) Jan 3 13:20:45 freyja FaxSend[9148]: modemsoftflowcmd = AT&K4 (line 69) Jan 3 13:20:45 freyja FaxSend[9148]: modemsetupdtrcmd = AT&D2 (line 70) Jan 3 13:20:45 freyja FaxSend[9148]: modemsetupdcdcmd = AT&C1 (line 71) Jan 3 13:20:45 freyja FaxSend[9148]: modemmfrquerycmd = !Rockwell (line 73) Jan 3 13:20:45 freyja FaxSend[9148]: modemmodelquerycmd = !RC288DPi (line 74) Jan 3 13:20:45 freyja FaxSend[9148]: modemrevquerycmd = ATI3 (line 75) Jan 3 13:20:45 freyja FaxSend[9148]: modemdialcmd = ATDT%s (line 77) Jan 3 13:20:45 freyja FaxSend[9148]: MODEM set DTR OFF Jan 3 13:20:45 freyja FaxSend[9148]: DELAY 75 ms Jan 3 13:20:45 freyja FaxSend[9148]: MODEM set DTR ON Jan 3 13:20:45 freyja FaxSend[9148]: DELAY 2600 ms Jan 3 13:20:48 freyja FaxSend[9148]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS Jan 3 13:20:48 freyja FaxSend[9148]: MODEM flush i/o Jan 3 13:20:48 freyja FaxSend[9148]: <-- [4:ATZ\r] Jan 3 13:20:49 freyja FaxGetty[9086]: ANSWER: Can not lock modem device Jan 3 13:20:49 freyja FaxGetty[9086]: STATE CHANGE: RUNNING -> LOCKWAIT (timeout 30) Jan 3 13:20:49 freyja FaxQueuer[9080]: MODEM ttyS2: BUSY Jan 3 13:20:49 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:49 freyja FaxSend[9148]: DELAY 3000 ms Jan 3 13:20:52 freyja FaxSend[9148]: <-- [5:ATE0\r] Jan 3 13:20:52 freyja FaxSend[9148]: --> [4:ATE0] Jan 3 13:20:52 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:52 freyja FaxSend[9148]: <-- [5:ATV1\r] Jan 3 13:20:52 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:52 freyja FaxSend[9148]: <-- [5:ATQ0\r] Jan 3 13:20:52 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:52 freyja FaxSend[9148]: <-- [7:ATS0=0\r] Jan 3 13:20:53 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:53 freyja FaxSend[9148]: <-- [7:ATS8=2\r] Jan 3 13:20:53 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:53 freyja FaxSend[9148]: <-- [8:ATS7=60\r] Jan 3 13:20:53 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:53 freyja FaxSend[9148]: <-- [6:AT&K3\r] Jan 3 13:20:53 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:53 freyja FaxSend[9148]: <-- [6:AT&D2\r] Jan 3 13:20:54 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:54 freyja FaxSend[9148]: <-- [6:AT&C1\r] Jan 3 13:20:54 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:54 freyja FaxSend[9148]: <-- [12:AT+FCLASS=?\r] Jan 3 13:20:54 freyja FaxSend[9148]: --> [5:0,1,2] Jan 3 13:20:54 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:54 freyja FaxSend[9148]: MODEM Supports "Data" Jan 3 13:20:54 freyja FaxSend[9148]: MODEM Supports "Class 1" Jan 3 13:20:54 freyja FaxSend[9148]: MODEM Supports "Class 2" Jan 3 13:20:54 freyja FaxSend[9148]: <-- [12:AT+FCLASS=1\r] Jan 3 13:20:54 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:54 freyja FaxSend[9148]: MODEM: Mfr Rockwell Jan 3 13:20:54 freyja FaxSend[9148]: <-- [5:ATI3\r] Jan 3 13:20:54 freyja FaxSend[9148]: --> [13:V1.600-V34_DP] Jan 3 13:20:54 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:54 freyja FaxSend[9148]: MODEM: Model RC288DPi Jan 3 13:20:54 freyja FaxSend[9148]: MODEM: Revision V1.600-V34_DP Jan 3 13:20:54 freyja FaxSend[9148]: <-- [9:AT+FTM=?\r] Jan 3 13:20:55 freyja FaxSend[9148]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146] Jan 3 13:20:55 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 3.85 line/mm Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 7.7 line/mm Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 2400 bit/s Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 4800 bit/s Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 7200 bit/s Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 9600 bit/s Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 12000 bit/s Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 14400 bit/s Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports page width 1728 pixels in 215 mm Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports page width 2048 pixels in 255 mm Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports page width 2432 pixels in 303 mm Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports A4 page length (297 mm) Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports B4 page length (364 mm) Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports unlimited page length Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 1-D MR Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 2-D MR Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 0 ms/scanline Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 5 ms/scanline Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 10 ms, 5 ms/scanline Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 10 ms/scanline Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 20 ms, 10 ms/scanline Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 20 ms/scanline Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 40 ms, 20 ms/scanline Jan 3 13:20:55 freyja FaxSend[9148]: MODEM Supports 40 ms/scanline Jan 3 13:20:55 freyja FaxSend[9148]: <-- [9:AT+FRM=?\r] Jan 3 13:20:55 freyja FaxSend[9148]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146] Jan 3 13:20:55 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:55 freyja FaxSend[9148]: <-- [12:AT+FCLASS=1\r] Jan 3 13:20:55 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:55 freyja FaxSend[9148]: MODEM ROCKWELL RC288DPi/V1.600-V34_DP Jan 3 13:20:55 freyja FaxSend[9148]: <-- [5:ATM0\r] Jan 3 13:20:55 freyja FaxSend[9148]: --> [2:OK] Jan 3 13:20:55 freyja FaxSend[9148]: STATE CHANGE: BASE -> RUNNING Jan 3 13:20:55 freyja FaxSend[9148]: MODEM input buffering disabled Jan 3 13:20:55 freyja FaxSend[9148]: SEND FAX: JOB 4 DEST 92771080 COMMID 00000029 DEVICE '/dev/ttyS2' Jan 3 13:21:39 freyja FaxSend[9148]: SEND: No response to MPS or EOP repeated 3 tries; Giving up after 3 attempts to send same page "docq/doc4.cover;40", dirnum 0 Jan 3 13:21:42 freyja FaxQueuer[9080]: NOTIFY: bin/notify "doneq/q4" "failed" "0:57"
- Follow-Ups:
- Re: [hylafax-users] Class1 vs. Class2
- From: Lee Howard
- Re: [hylafax-users] Class1 vs. Class2
- References:
- [hylafax-users] Class1 vs. Class2
- From: John Darrington
- Re: [hylafax-users] Class1 vs. Class2
- From: Lee Howard
- Re: [hylafax-users] Class1 vs. Class2
- From: John Darrington
- Re: [hylafax-users] Class1 vs. Class2
- From: Lee Howard
- Re: [hylafax-users] Class1 vs. Class2
- From: Lee Howard
- [hylafax-users] Class1 vs. Class2
- Prev by Date: Re: [hylafax-users] Simple, Basic Question
- Next by Date: Re: [hylafax-users] Class1 vs. Class2
- Previous by thread: Re: [hylafax-users] Class1 vs. Class2
- Next by thread: Re: [hylafax-users] Class1 vs. Class2
- Index(es):
Project hosted by iFAX Solutions