 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Help with log interpretation
- To: "'hylafax-users@hylafax.org'" <hylafax-users@hylafax.org>
- Subject: [hylafax-users] Help with log interpretation
- From: Chris Shaw <cshaw@dgsystems.com>
- Date: Wed, 9 Oct 2002 15:18:30 -0500
Can someone help me to interpret what I'm seeing here? My untrained eye says the receiving end just hung up for some reason. Am I reading too much into "REMOTE HANGUP"? The recipient says they got some of the pages but not all. HylaFAX 4.0pl1 binary1.0 on Solaris 2.6 and old USR modems. I know how old our hylaFAX is and about the compatibility issues with the USR's. We are about to upgrade both. Thanks for any help you may be able to provide and feel free to slap me around if this is a FAQ and I should have found it on my own. Please tell me where I should have looked while beating me though. ;-) Thanks, Chris plum:/var/spool/fax/log $ cat c03645191 Oct 07 08:00:05.97: [ 1117]: SESSION BEGIN 03645191 14049954056 Oct 07 08:00:05.97: [ 1117]: SEND FAX: JOB 24901 DEST +14049954056 COMMID 03645191 Oct 07 08:00:05.97: [ 1117]: MODEM set DTR OFF Oct 07 08:00:06.00: [ 1117]: DELAY 2600 ms Oct 07 08:00:08.60: [ 1117]: MODEM set DTR ON Oct 07 08:00:08.75: [ 1117]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS Oct 07 08:00:08.75: [ 1117]: MODEM flush i/o Oct 07 08:00:08.75: [ 1117]: <-- [17:ATE0V1Q0X4S0=0H0\r] Oct 07 08:00:09.08: [ 1117]: --> [2:OK] Oct 07 08:00:09.09: [ 1117]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r] Oct 07 08:00:09.30: [ 1117]: --> [2:OK] Oct 07 08:00:09.31: [ 1117]: <-- [14:AT+FCLASS=2.0\r] Oct 07 08:00:09.40: [ 1117]: --> [2:OK] Oct 07 08:00:09.41: [ 1117]: <-- [9:AT+FLO=2\r] Oct 07 08:00:09.50: [ 1117]: --> [2:OK] Oct 07 08:00:09.51: [ 1117]: <-- [9:AT+FPP=0\r] Oct 07 08:00:09.60: [ 1117]: --> [2:OK] Oct 07 08:00:09.61: [ 1117]: <-- [9:AT+FBO=0\r] Oct 07 08:00:09.70: [ 1117]: --> [2:OK] Oct 07 08:00:09.71: [ 1117]: <-- [10:AT+FCT=30\r] Oct 07 08:00:09.80: [ 1117]: --> [2:OK] Oct 07 08:00:09.81: [ 1117]: <-- [15:AT+FNR=1,1,1,1\r] Oct 07 08:00:09.90: [ 1117]: --> [2:OK] Oct 07 08:00:09.91: [ 1117]: <-- [9:AT+FIE=0\r] Oct 07 08:00:10.00: [ 1117]: --> [2:OK] Oct 07 08:00:10.01: [ 1117]: <-- [9:AT+FBU=0\r] Oct 07 08:00:10.11: [ 1117]: --> [2:OK] Oct 07 08:00:10.11: [ 1117]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Oct 07 08:00:10.20: [ 1117]: --> [2:OK] Oct 07 08:00:10.21: [ 1117]: <-- [5:ATM0\r] Oct 07 08:00:10.42: [ 1117]: --> [2:OK] Oct 07 08:00:10.43: [ 1117]: STATE CHANGE: RUNNING -> SENDING Oct 07 08:00:10.43: [ 1117]: MODEM input buffering enabled Oct 07 08:00:10.43: [ 1117]: <-- [14:AT+FCLASS=2.0\r] Oct 07 08:00:10.62: [ 1117]: --> [2:OK] Oct 07 08:00:10.62: [ 1117]: <-- [9:AT+FLO=2\r] Oct 07 08:00:10.80: [ 1117]: --> [2:OK] Oct 07 08:00:10.80: [ 1117]: <-- [9:AT+FPP=0\r] Oct 07 08:00:10.98: [ 1117]: --> [2:OK] Oct 07 08:00:10.98: [ 1117]: <-- [9:AT+FBO=0\r] Oct 07 08:00:11.16: [ 1117]: --> [2:OK] Oct 07 08:00:11.16: [ 1117]: <-- [10:AT+FCT=30\r] Oct 07 08:00:11.34: [ 1117]: --> [2:OK] Oct 07 08:00:11.34: [ 1117]: <-- [15:AT+FNR=1,1,1,1\r] Oct 07 08:00:11.52: [ 1117]: --> [2:OK] Oct 07 08:00:11.52: [ 1117]: <-- [9:AT+FIE=0\r] Oct 07 08:00:11.70: [ 1117]: --> [2:OK] Oct 07 08:00:11.70: [ 1117]: <-- [9:AT+FBU=0\r] Oct 07 08:00:11.88: [ 1117]: --> [2:OK] Oct 07 08:00:11.88: [ 1117]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r] Oct 07 08:00:12.06: [ 1117]: --> [2:OK] Oct 07 08:00:12.06: [ 1117]: <-- [20:AT+FLI="DG Systems"\r] Oct 07 08:00:12.24: [ 1117]: --> [2:OK] Oct 07 08:00:12.24: [ 1117]: DIAL 14049954056 Oct 07 08:00:12.24: [ 1117]: <-- [16:ATDT14049954056\r] Oct 07 08:00:30.16: [ 1117]: --> [4:+FCO] Oct 07 08:00:31.78: [ 1117]: --> [45:+FNF:000049EEA088CBB903670C1B640A010100000102] Oct 07 08:00:31.78: [ 1117]: REMOTE NSF "000049EEA088CBB903670C1B640A010100000102" Oct 07 08:00:32.28: [ 1117]: --> [20:+FIS:1,5,0,2,1,1,0,3] Oct 07 08:00:32.28: [ 1117]: --> [2:OK] Oct 07 08:00:32.28: [ 1117]: REMOTE best rate 14400 bit/s Oct 07 08:00:32.28: [ 1117]: REMOTE max page width 1728 pixels in 215 mm Oct 07 08:00:32.28: [ 1117]: REMOTE max unlimited page length Oct 07 08:00:32.28: [ 1117]: REMOTE best vres 7.7 line/mm Oct 07 08:00:32.28: [ 1117]: REMOTE best format 2-D MR Oct 07 08:00:32.28: [ 1117]: REMOTE supports T.30 Annex A, ECM Oct 07 08:00:32.28: [ 1117]: REMOTE best 10 ms/scanline Oct 07 08:00:32.28: [ 1117]: USE 14400 bit/s Oct 07 08:00:32.29: [ 1117]: USE 10 ms/scanline Oct 07 08:00:32.29: [ 1117]: SEND file "docq/doc21116.ps;30" Oct 07 08:00:32.29: [ 1117]: USE page width 1728 pixels in 215 mm Oct 07 08:00:32.29: [ 1117]: USE unlimited page length Oct 07 08:00:32.29: [ 1117]: USE 3.85 line/mm Oct 07 08:00:32.29: [ 1117]: USE 1-D MR Oct 07 08:00:32.29: [ 1117]: <-- [23:AT+FIS=0,5,0,2,0,0,0,3\r] Oct 07 08:00:32.48: [ 1117]: --> [2:OK] Oct 07 08:00:32.48: [ 1117]: <-- [7:AT+FDT\r] Oct 07 08:00:39.50: [ 1117]: --> [20:+FCS:0,5,0,2,0,0,0,3] Oct 07 08:00:40.06: [ 1117]: --> [7:CONNECT] Oct 07 08:00:40.06: [ 1117]: SEND begin page Oct 07 08:00:40.06: [ 1117]: <-- data [1031] Oct 07 08:00:40.07: [ 1117]: <-- data [1047] Oct 07 08:00:40.07: [ 1117]: <-- data [1051] Oct 07 08:00:40.10: [ 1117]: <-- data [1043] Oct 07 08:00:40.34: [ 1117]: <-- data [1031] Oct 07 08:00:40.54: [ 1117]: <-- data [1028] Oct 07 08:00:40.76: [ 1117]: <-- data [1024] Oct 07 08:00:41.14: [ 1117]: <-- data [1031] Oct 07 08:00:41.34: [ 1117]: <-- data [1027] Oct 07 08:00:41.56: [ 1117]: <-- data [1025] Oct 07 08:00:41.94: [ 1117]: <-- data [1024] Oct 07 08:00:42.14: [ 1117]: <-- data [1024] Oct 07 08:00:42.36: [ 1117]: <-- data [1024] Oct 07 08:00:43.02: [ 1117]: <-- data [1024] Oct 07 08:00:43.54: [ 1117]: <-- data [1024] Oct 07 08:00:44.10: [ 1117]: <-- data [1024] Oct 07 08:00:44.83: [ 1117]: <-- data [1028] Oct 07 08:00:45.37: [ 1117]: <-- data [1027] Oct 07 08:00:45.92: [ 1117]: <-- data [1024] Oct 07 08:00:46.97: [ 1117]: <-- data [1026] Oct 07 08:00:47.17: [ 1117]: <-- data [1025] Oct 07 08:00:47.70: [ 1117]: <-- data [790] Oct 07 08:00:48.74: [ 1117]: SENT 22294 bytes of data Oct 07 08:00:48.75: [ 1117]: SEND 1D RTC Oct 07 08:00:48.75: [ 1117]: <-- data [9] Oct 07 08:00:49.26: [ 1117]: SEND end page Oct 07 08:00:49.27: [ 1117]: SEND send MPS (more pages, same document) Oct 07 08:00:49.27: [ 1117]: <-- data [2] Oct 07 08:00:59.28: [ 1117]: --> [2:OK] Oct 07 08:00:59.28: [ 1117]: SEND recv MCF (message confirmation) Oct 07 08:00:59.28: [ 1117]: SEND FAX (03645191): FROM swu@plum TO +14049954056 (page 1 of 3 sent in 0:27) Oct 07 08:00:59.28: [ 1117]: SEND FAX (03645191): FROM swu@plum TO +14049954056 (docq/doc21116.ps;30 sent in 0:27) Oct 07 08:00:59.34: [ 1117]: SEND file "docq/doc21117.tif;30" Oct 07 08:00:59.34: [ 1117]: USE page width 1728 pixels in 215 mm Oct 07 08:00:59.34: [ 1117]: USE unlimited page length Oct 07 08:00:59.34: [ 1117]: USE 3.85 line/mm Oct 07 08:00:59.34: [ 1117]: USE 1-D MR Oct 07 08:00:59.34: [ 1117]: <-- [7:AT+FDT\r] Oct 07 08:01:00.06: [ 1117]: --> [7:CONNECT] Oct 07 08:01:00.06: [ 1117]: SEND begin page Oct 07 08:01:00.07: [ 1117]: <-- data [1031] Oct 07 08:01:00.07: [ 1117]: <-- data [1031] Oct 07 08:01:00.07: [ 1117]: <-- data [1027] Oct 07 08:01:00.11: [ 1117]: <-- data [1024] Oct 07 08:01:00.34: [ 1117]: <-- data [1031] Oct 07 08:01:00.54: [ 1117]: <-- data [1029] Oct 07 08:01:00.76: [ 1117]: <-- data [1028] Oct 07 08:01:01.14: [ 1117]: <-- data [1026] Oct 07 08:01:01.35: [ 1117]: <-- data [1031] Oct 07 08:01:01.56: [ 1117]: <-- data [1033] Oct 07 08:01:01.95: [ 1117]: <-- data [1035] Oct 07 08:01:02.14: [ 1117]: <-- data [1033] Oct 07 08:01:02.37: [ 1117]: <-- data [1031] Oct 07 08:01:03.59: [ 1117]: <-- data [1026] Oct 07 08:01:04.30: [ 1117]: <-- data [1028] Oct 07 08:01:04.52: [ 1117]: <-- data [1028] Oct 07 08:01:05.62: [ 1117]: <-- data [1028] Oct 07 08:01:06.31: [ 1117]: <-- data [1030] Oct 07 08:01:06.80: [ 1117]: <-- data [1035] Oct 07 08:01:07.84: [ 1117]: <-- data [1028] Oct 07 08:01:08.05: [ 1117]: <-- data [1036] Oct 07 08:01:08.90: [ 1117]: <-- data [1031] Oct 07 08:01:09.61: [ 1117]: <-- data [1034] Oct 07 08:01:10.11: [ 1117]: <-- data [1035] Oct 07 08:01:10.62: [ 1117]: <-- data [1030] Oct 07 08:01:11.63: [ 1117]: <-- data [1028] Oct 07 08:01:12.14: [ 1117]: <-- data [1030] Oct 07 08:01:12.66: [ 1117]: <-- data [1031] Oct 07 08:01:13.83: [ 1117]: <-- data [1030] Oct 07 08:01:14.05: [ 1117]: <-- data [1026] Oct 07 08:01:14.56: [ 1117]: <-- data [511] Oct 07 08:01:15.54: [ 1117]: SENT 31231 bytes of data Oct 07 08:01:15.55: [ 1117]: SEND 1D RTC Oct 07 08:01:15.55: [ 1117]: <-- data [9] Oct 07 08:01:16.04: [ 1117]: SEND end page Oct 07 08:01:16.05: [ 1117]: SEND send MPS (more pages, same document) Oct 07 08:01:16.05: [ 1117]: <-- data [2] Oct 07 08:01:37.08: [ 1117]: --> [7:+FHS:A0] Oct 07 08:01:37.08: [ 1117]: REMOTE HANGUP: Unspecified Phase D error (code A0) Oct 07 08:01:37.09: [ 1117]: <-- [5:ATH0\r] Oct 07 08:01:37.09: [ 1117]: --> [2:OK] Oct 07 08:01:37.09: [ 1117]: MODEM set DTR OFF Oct 07 08:01:37.13: [ 1117]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5) Oct 07 08:01:37.13: [ 1117]: SESSION END ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
- Prev by Date: Re: [hylafax-users] faxstat (problem with hylaerrorstats.sh)
- Next by Date: Re: [hylafax-users] faxgetty for DID managing
- Previous by thread: Re: [hylafax-users] faxstat (problem with hylaerrorstats.sh)
- Next by thread: [hylafax-users] Custom FaxDispatch
- Index(es):
Project hosted by iFAX Solutions