Re: [hylafax-users] Modem recommendation

[Lee Howard <faxguy@howardsilvan.com>]

On 2002.10.09 08:40 Michael T. Babcock wrote:
> Lee Howard wrote:
> 
>> thousand uniqe destinations with no problems.  I have much more 
>> grief with my USRs and Zyxels.  I use Class 1 exclusively with 
>> nearly all of my installations.  The Class 1 firmware (if available) 
>> on the MT2384BA and MT5600BL should be very comparable to what is on 
>> the MT5634s, so your errors are quite surprising.
> 
> Any init string / configuration recommendations for the MT2834BA's in 
> class 1?  I couldn't get mine to reset properly (they reset, all the 
> strings went through and returned OK, but FaxGetty kept logging that 
> it couldn't reset the modem(s).

I use the 5634s which take a different config file.  I believe that 
MultiTech switched from Rockwell/Conexant to Lucent/Agere chipsets 
between the 2834s and the 5634s.  You could try to use config/lucent as 
your prototype.  I just use default settings.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*