*****SPAM***** [hylafax-users] *****SPAM***** Please help me

["Janusz" <janu_pos@poczta.onet.pl>]

SPAM: -------------------- Start SpamAssassin results ----------------------
SPAM: This mail is probably spam.  The original message has been altered
SPAM: so you can recognise or block similar unwanted mail in future.
SPAM: See http://spamassassin.org/tag/ for more details.
SPAM: 
SPAM: Content analysis details:   (5.6 hits, 5 required)
SPAM: FROM_NAME_NO_SPACES (-0.1 points) From: no spaces in name
SPAM: PROFITS            (1.8 points)  BODY: Contains word 'profits' in all-caps
SPAM: DOUBLE_CAPSWORD    (1.1 points)  BODY: A word in all caps repeated on the line
SPAM: UPPERCASE_25_50    (1.9 points)  BODY: message body is 25-50% uppercase
SPAM: RCVD_IN_MULTIHOP_DSBL (1.0 points)  RBL: Received via a relay in multihop.dsbl.org
SPAM:                    [RBL check: found 29.130.180.213.multihop.dsbl.org]
SPAM: RCVD_IN_RFCI       (0.5 points)  RBL: Received via a relay in ipwhois.rfc-ignorant.org
SPAM:                    [RBL check: found 216.227.76.213.ipwhois.rfc-ignorant.org., type: 127.0.0.6]
SPAM: X_RCVD_IN_UNCONFIRMED_DSBL (1.0 points)  RBL: Received via a relay in unconfirmed.dsbl.org
SPAM:                    [RBL check: found 29.130.180.213.unconfirmed.dsbl.org]
SPAM: FUDGE_MULTIHOP_RELAY (-1.0 points) RBL: Do not double penalize if an IP is a multihop and an open relay
SPAM: AWL                (-0.6 points) AWL: Auto-whitelist adjustment
SPAM: 
SPAM: -------------------- End of SpamAssassin results ---------------------

SPAM: -------------------- Start SpamAssassin results ----------------------
SPAM: This mail is probably spam.  The original message has been altered
SPAM: so you can recognise or block similar unwanted mail in future.
SPAM: See http://spamassassin.org/tag/ for more details.
SPAM: 
SPAM: Content analysis details:   (5.7 hits, 5 required)
SPAM: FROM_NAME_NO_SPACES (-0.1 points) From: no spaces in name
SPAM: PROFITS            (1.8 points)  BODY: Contains word 'profits' in all-caps
SPAM: DOUBLE_CAPSWORD    (1.1 points)  BODY: A word in all caps repeated on the line
SPAM: UPPERCASE_25_50    (1.9 points)  BODY: message body is 25-50% uppercase
SPAM: RCVD_IN_MULTIHOP_DSBL (1.0 points)  RBL: Received via a relay in multihop.dsbl.org
SPAM:                    [RBL check: found 29.130.180.213.multihop.dsbl.org]
SPAM: RCVD_IN_RFCI       (0.5 points)  RBL: Received via a relay in ipwhois.rfc-ignorant.org
SPAM:                    [RBL check: found 216.227.76.213.ipwhois.rfc-ignorant.org., type: 127.0.0.6]
SPAM: X_RCVD_IN_UNCONFIRMED_DSBL (1.0 points)  RBL: Received via a relay in unconfirmed.dsbl.org
SPAM:                    [RBL check: found 29.130.180.213.unconfirmed.dsbl.org]
SPAM: FUDGE_MULTIHOP_RELAY (-1.0 points) RBL: Do not double penalize if an IP is a multihop and an open relay
SPAM: AWL                (-0.5 points) AWL: Auto-whitelist adjustment
SPAM: 
SPAM: -------------------- End of SpamAssassin results ---------------------

This is a multi-part message in MIME format.

------=_NextPart_000_0031_01C260AC.AA18F940
Content-Type: text/plain; charset="iso-8859-2"
Content-Transfer-Encoding: quoted-printable

What's wrong I'm novice in Hylafax. I'm using faxmodem MINT monsoon. I rece=
ived one fax correctly and next with this log.

Sep 20 12:59:34.23: [21258]: SESSION BEGIN 00000016 48228354316
Sep 20 12:59:34.23: [21258]: HylaFAX (tm) Version 4.1.3
Sep 20 12:59:34.23: [21258]: <-- [4:ATA\r]
Sep 20 13:00:46.47: [21258]: --> [10:NO CARRIER]
Sep 20 13:00:46.47: [21258]: ANSWER: Ring detected without successful hands=
hake
Sep 20 13:00:46.47: [21258]: SESSION END
This is my config.ttyS0

# $Id: rockwell-k56,v 1.7 2002/05/10 13:33:16 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
#=20
# Permission to use, copy, modify, distribute, and sell this software and=
=20
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names =
of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#=20
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,=20
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY=20
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.=20
#=20
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF=
=20
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE=20
# OF THIS SOFTWARE.
#
#
# Configuration for a Rockwell AC/K56-based Class 2 modem.
# based upon work of Mark J. Bailey, Jonathan Mau and Glenn Burkhardt.
# Multitech MT5600ZDX
# Diamond Multimedia SupraExpress 56e PRO
# Zoom Telephonics 56Kx
# (and others)
#
# This configuration file sets up the modem to run at 38.4 for
# sending and for receiving. XON/XOFF is used for flow control
# which also works for data connections. Adaptive answer support
# is reliable, but to use it you must also enable ModemWaitForConnect
# to force the server to skip intermediate status messages and
# wait for the "CONNECT" message.
#
#
CountryCode: 48
AreaCode: 22
FAXNumber: +48228354316
LongDistancePrefix: 01033
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0644
LogFileMode: 0644
DeviceMode: 0600=20
RingsBeforeAnswer: 2
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "+48228354316"=20
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class2 # use class 2 interface
ModemRate: 19200
ModemFlowControl: xonxoff # default
ModemWaitForConnect: yes # wait for CONNECT on answer
#
#ModemResetCmds: AT&F2 # what you want for a Supra
ModemNoFlowCmd: AT&K # disable flow control cmd
ModemHardFlowCmd: AT&K3 # hardware flow control cmd
ModemSoftFlowCmd: AT&K4 # software flow control cmd
ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset
ModemSetupDCDCmd: AT&C1 # DCD follows carrier
ModemSetupAACmd: AT+FCLASS=3D0;+FAA=3D1 # enable in class 0
#
ModemSendFillOrder: LSB2MSB # as expected
ModemRecvFillOrder: MSB2LSB # opposite of what makes sense
Class2DDISCmd: AT+FDIS
Class2RecvDataTrigger: "\022" # a la 2388-B

------=_NextPart_000_0031_01C260AC.AA18F940
Content-Type: text/html; charset="iso-8859-2"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; charset=3Diso-8859-2">
<META content=3D"MSHTML 6.00.2600.0" name=3DGENERATOR>
<DEFANGED_style_0 </STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT size=3D2>
<DIV><FONT size=3D2><FONT size=3D2><FONT size=3D2>
<P>What's wrong I'm novice in Hylafax. I'm using faxmodem MINT monsoon. I=
=20
received one fax correctly and next with this log.</P></DIV>
<DIV>Sep 20 12:59:34.23: [21258]: SESSION BEGIN 00000016 48228354316</DIV>
<DIV>Sep 20 12:59:34.23: [21258]: HylaFAX (tm) Version 4.1.3</DIV>
<DIV>Sep 20 12:59:34.23: [21258]: &lt;-- [4:ATA\r]</DIV>
<DIV>Sep 20 13:00:46.47: [21258]: --&gt; [10:NO CARRIER]</DIV>
<DIV>Sep 20 13:00:46.47: [21258]: ANSWER: Ring detected without successful=
=20
handshake</DIV>
<DIV>Sep 20 13:00:46.47: [21258]: SESSION END</DIV>
<DIV></FONT>
<P><STRONG>This is my config.ttyS0</STRONG></P></DIV>
<DIV># $Id: rockwell-k56,v 1.7 2002/05/10 13:33:16 darren Exp $</DIV>
<DIV>#</DIV>
<DIV># HylaFAX Facsimile Software</DIV>
<DIV>#</DIV>
<DIV># Copyright (c) 1990-1996 Sam Leffler</DIV>
<DIV># Copyright (c) 1991-1996 Silicon Graphics, Inc.</DIV>
<DIV># HylaFAX is a trademark of Silicon Graphics, Inc.</DIV>
<DIV># </DIV>
<DIV># Permission to use, copy, modify, distribute, and sell this software =
and=20
</DIV>
<DIV># its documentation for any purpose is hereby granted without fee,=20
provided</DIV>
<DIV># that (i) the above copyright notices and this permission notice appe=
ar=20
in</DIV>
<DIV># all copies of the software and related documentation, and (ii) the n=
ames=20
of</DIV>
<DIV># Sam Leffler and Silicon Graphics may not be used in any advertising=
=20
or</DIV>
<DIV># publicity relating to the software without the specific, prior=20
written</DIV>
<DIV># permission of Sam Leffler and Silicon Graphics.</DIV>
<DIV># </DIV>
<DIV># THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, <=
/DIV>
<DIV># EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY </D=
IV>
<DIV># WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. </D=
IV>
<DIV># </DIV>
<DIV># IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR</DIV>
<DIV># ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY=20
KIND,</DIV>
<DIV># OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR=20
PROFITS,</DIV>
<DIV># WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEO=
RY OF=20
</DIV>
<DIV># LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMAN=
CE=20
</DIV>
<DIV># OF THIS SOFTWARE.</DIV>
<DIV>#</DIV>
<DIV>#</DIV>
<DIV># Configuration for a Rockwell AC/K56-based Class 2 modem.</DIV>
<DIV># based upon work of Mark J. Bailey, Jonathan Mau and Glenn=20
Burkhardt.</DIV>
<DIV># Multitech MT5600ZDX</DIV>
<DIV># Diamond Multimedia SupraExpress 56e PRO</DIV>
<DIV># Zoom Telephonics 56Kx</DIV>
<DIV># (and others)</DIV>
<DIV>#</DIV>
<DIV># This configuration file sets up the modem to run at 38.4 for</DIV>
<DIV># sending and for receiving. XON/XOFF is used for flow control</DIV>
<DIV># which also works for data connections. Adaptive answer support</DIV>
<DIV># is reliable, but to use it you must also enable ModemWaitForConnect<=
/DIV>
<DIV># to force the server to skip intermediate status messages and</DIV>
<DIV># wait for the "CONNECT" message.</DIV>
<DIV>#</DIV>
<DIV>#</DIV>
<DIV>CountryCode: 48</DIV>
<DIV>AreaCode: 22</DIV>
<DIV>FAXNumber: +48228354316</DIV>
<DIV>LongDistancePrefix: 01033</DIV>
<DIV>InternationalPrefix: 00</DIV>
<DIV>DialStringRules: etc/dialrules</DIV>
<DIV>ServerTracing: 1</DIV>
<DIV>SessionTracing: 11</DIV>
<DIV>RecvFileMode: 0644</DIV>
<DIV>LogFileMode: 0644</DIV>
<DIV>DeviceMode: 0600 </DIV>
<DIV>RingsBeforeAnswer: 2</DIV>
<DIV>SpeakerVolume: off</DIV>
<DIV>GettyArgs: "-h %l dx_%s"</DIV>
<DIV>LocalIdentifier: "+48228354316" </DIV>
<DIV>TagLineFont: etc/lutRS18.pcf</DIV>
<DIV>TagLineFormat: "From %%l|%c|Page %%P of %%T"</DIV>
<DIV>MaxRecvPages: 25</DIV>
<DIV>#</DIV>
<DIV>#</DIV>
<DIV># Modem-related stuff: should reflect modem command interface</DIV>
<DIV># and hardware connection/cabling (e.g. flow control).</DIV>
<DIV>#</DIV>
<DIV>ModemType: Class2 # use class 2 interface</DIV>
<DIV>ModemRate: 19200</DIV>
<DIV>ModemFlowControl: xonxoff # default</DIV>
<DIV>ModemWaitForConnect: yes # wait for CONNECT on answer</DIV>
<DIV>#</DIV>
<DIV>#ModemResetCmds: AT&amp;F2 # what you want for a Supra</DIV>
<DIV>ModemNoFlowCmd: AT&amp;K # disable flow control cmd</DIV>
<DIV>ModemHardFlowCmd: AT&amp;K3 # hardware flow control cmd</DIV>
<DIV>ModemSoftFlowCmd: AT&amp;K4 # software flow control cmd</DIV>
<DIV>ModemSetupDTRCmd: AT&amp;D3 # DTR off causes modem to reset</DIV>
<DIV>ModemSetupDCDCmd: AT&amp;C1 # DCD follows carrier</DIV>
<DIV>ModemSetupAACmd: AT+FCLASS=3D0;+FAA=3D1 # enable in class 0</DIV>
<DIV>#</DIV>
<DIV>ModemSendFillOrder: LSB2MSB # as expected</DIV>
<DIV>ModemRecvFillOrder: MSB2LSB # opposite of what makes sense</DIV>
<DIV>Class2DDISCmd: AT+FDIS</DIV>
<DIV>Class2RecvDataTrigger: "\022" # a la=20
2388-B</DIV></FONT></FONT></FONT></DIV></BODY></HTML>

------=_NextPart_000_0031_01C260AC.AA18F940--

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*