[hylafax-users] Unspecified Transmit Phase D error

["Gunther Wenzel Cyster" <gwenzel@costarricense.cr>]

Hello all,

While sending to a fax number I had never sent before, the job failed after three attempts.

Info:
Slackware 8.0 (kernel 2.2.19)
HylaFAX 4.1.2.
Rockwell RC32ACL based Class 2 internal modem.

Snipped logs:
Attempt #1--------------------------------------------------
Aug 26 12:06:50.81: [32597]: DIAL 2244031
Aug 26 12:06:50.81: [32597]: <-- [14:ATDT9,2244031\r]
Aug 26 12:07:09.64: [32597]: --> [5:+FCON]
Aug 26 12:07:12.52: [32597]: --> [29:+FCSI: "             2244031"]
Aug 26 12:07:12.52: [32597]: REMOTE CSI "2244031"
Aug 26 12:07:12.91: [32597]: --> [22:+FDIS: 1,3,0,2,1,0,0,4]
Aug 26 12:07:13.02: [32597]: --> [2:OK]
Aug 26 12:07:13.02: [32597]: REMOTE best rate 9600 bit/s
Aug 26 12:07:13.02: [32597]: REMOTE max page width 1728 pixels in 215 mm
Aug 26 12:07:13.02: [32597]: REMOTE max unlimited page length 
Aug 26 12:07:13.02: [32597]: REMOTE best vres 7.7 line/mm
Aug 26 12:07:13.02: [32597]: REMOTE best format 2-D MR
Aug 26 12:07:13.02: [32597]: REMOTE best 20 ms, 10 ms/scanline
Aug 26 12:07:13.02: [32597]: USE 9600 bit/s
Aug 26 12:07:13.02: [32597]: USE 20 ms, 10 ms/scanline
Aug 26 12:07:13.02: [32597]: SEND file "docq/doc222.ps;31"
Aug 26 12:07:13.02: [32597]: USE page width 1728 pixels in 215 mm
Aug 26 12:07:13.02: [32597]: USE unlimited page length 
Aug 26 12:07:13.02: [32597]: USE 7.7 line/mm
Aug 26 12:07:13.02: [32597]: USE 1-D MR
Aug 26 12:07:13.02: [32597]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,4\r]
Aug 26 12:07:13.27: [32597]: --> [2:OK]
Aug 26 12:07:13.27: [32597]: <-- [7:AT+FDT\r]
Aug 26 12:08:06.43: [32597]: --> [9:+FHNG: 25]
Aug 26 12:08:06.43: [32597]: REMOTE HANGUP: DCS sent 3 times without response (code 25)
Aug 26 12:08:07.42: [32597]: --> [2:OK]
Aug 26 12:11:07.42: [32597]: MODEM <Timeout>
Aug 26 12:11:07.42: [32597]: <-- [5:ATH0\r]
Aug 26 12:11:07.67: [32597]: --> [2:OK]
Aug 26 12:11:07.67: [32597]: SESSION END
------------------------------------------------------------

Attempt #2--------------------------------------------------
Aug 26 12:13:15.12: [32642]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,4\r]
Aug 26 12:13:15.38: [32642]: --> [2:OK]
Aug 26 12:13:15.38: [32642]: <-- [7:AT+FDT\r]
Aug 26 12:13:38.93: [32642]: --> [9:+FHNG: 50]
Aug 26 12:13:38.93: [32642]: REMOTE HANGUP: Unspecified Transmit Phase D error, including +FPHCTO timeout between data and +FET command (code 50)
Aug 26 12:13:39.92: [32642]: --> [2:OK]
Aug 26 12:16:39.92: [32642]: MODEM <Timeout>
Aug 26 12:16:39.92: [32642]: <-- [5:ATH0\r]
Aug 26 12:16:40.17: [32642]: --> [2:OK]
Aug 26 12:16:40.17: [32642]: SESSION END
------------------------------------------------------------

Attempt #3--------------------------------------------------
Aug 26 12:18:25.71: [32695]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,4\r]
Aug 26 12:18:25.96: [32695]: --> [2:OK]
Aug 26 12:18:25.96: [32695]: <-- [7:AT+FDT\r]
Aug 26 12:18:51.33: [32695]: --> [9:+FHNG: 50]
Aug 26 12:18:51.33: [32695]: REMOTE HANGUP: Unspecified Transmit Phase D error, including +FPHCTO timeout between data and +FET command (code 50)
Aug 26 12:18:52.32: [32695]: --> [2:OK]
Aug 26 12:21:52.32: [32695]: MODEM <Timeout>
Aug 26 12:21:52.32: [32695]: SEND: Unspecified Transmit Phase D error, including +FPHCTO timeout between data and +FET command; Giving up after 3 attempts to send same page "docq/doc222.ps;31", dirnum 0
Aug 26 12:21:52.32: [32695]: <-- [5:ATH0\r]
Aug 26 12:21:52.57: [32695]: --> [2:OK]
Aug 26 12:21:52.57: [32695]: SESSION END
------------------------------------------------------------

Thanks in advance,

Gunther Wenzel





____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*