[hylafax-users] Multiple attempts to send a fax...

["Sunil William Savkar" <savkar@inthespace.com>]

Hi.

I am currently using a linmodem (conexant based driver) with hylafax and
things work fairly well except for an odd behavior...

Usually when I am faxing, the first or second time I will get an error
that there is no dialtone.  Although running minicom this never happens,
it happens every time with hylafax.  Finally the fax is requed and sent
out, but it sometimes takes a couple of times.

Below is the latest log.  Any ideas?

Aug 26 12:39:48.91: [10919]: SESSION BEGIN 00000016 12124129043
Aug 26 12:39:48.91: [10919]: HylaFAX (tm) Version 4.1.3
Aug 26 12:39:48.91: [10919]: SEND FAX: JOB 13 DEST 12124129043 COMMID
00000016 D
EVICE '/dev/ttySHCF0'

Aug 26 12:39:48.91: [10919]: MODEM set DTR OFF
Aug 26 12:39:48.91: [10919]: DELAY 75 ms
Aug 26 12:39:48.98: [10919]: MODEM set DTR ON
Aug 26 12:39:48.98: [10919]: DELAY 2600 ms
Aug 26 12:39:51.58: [10919]: MODEM set baud rate: 19200 baud, input flow
RTS/CTS
, output flow RTS/CTS
Aug 26 12:39:51.58: [10919]: MODEM flush i/o
Aug 26 12:39:51.58: [10919]: <-- [4:ATZ\r]
Aug 26 12:39:51.61: [10919]: --> [2:OK]
Aug 26 12:39:51.61: [10919]: DELAY 3000 ms
Aug 26 12:39:54.61: [10919]: <-- [5:ATE0\r]
Aug 26 12:39:54.65: [10919]: --> [4:ATE0]
Aug 26 12:39:54.65: [10919]: --> [2:OK]
Aug 26 12:39:54.65: [10919]: <-- [5:ATV1\r]
Aug 26 12:39:54.69: [10919]: --> [2:OK]
Aug 26 12:39:54.69: [10919]: <-- [5:ATQ0\r]
Aug 26 12:39:54.73: [10919]: --> [2:OK]
Aug 26 12:39:54.73: [10919]: <-- [7:ATS0=0\r]
Aug 26 12:39:54.77: [10919]: --> [2:OK]
Aug 26 12:39:54.77: [10919]: <-- [7:ATS8=2\r]
Aug 26 12:39:54.81: [10919]: --> [2:OK]
Aug 26 12:39:54.81: [10919]: <-- [8:ATS7=60\r]
Aug 26 12:39:54.85: [10919]: --> [2:OK]
Aug 26 12:39:54.85: [10919]: <-- [6:AT&K3\r]
Aug 26 12:39:54.89: [10919]: --> [2:OK]
Aug 26 12:39:54.89: [10919]: <-- [6:AT&D2\r]
Aug 26 12:39:54.93: [10919]: --> [2:OK]
Aug 26 12:39:54.93: [10919]: <-- [6:AT&C1\r]
Aug 26 12:39:54.97: [10919]: --> [2:OK]
Aug 26 12:39:54.97: [10919]: <-- [12:AT+FCLASS=1\r]
Aug 26 12:39:55.00: [10919]: --> [2:OK]
Aug 26 12:39:55.00: [10919]: <-- [5:ATM0\r]
Aug 26 12:39:55.04: [10919]: --> [2:OK]
Aug 26 12:39:55.04: [10919]: MODEM input buffering enabled
Aug 26 12:39:55.04: [10919]: <-- [12:AT+FCLASS=1\r]
Aug 26 12:39:55.18: [10919]: --> [2:OK]
Aug 26 12:39:55.18: [10919]: DIAL 12124129043
Aug 26 12:39:55.18: [10919]: <-- [16:ATDT12124129043\r]
Aug 26 12:40:04.51: [10919]: --> [11:NO DIALTONE]
Aug 26 12:40:04.51: [10919]: SEND FAILED: JOB 13 DEST 12124129043 ERR No
local d
ialtone
Aug 26 12:40:04.51: [10919]: <-- [5:ATH0\r]
Aug 26 12:40:05.34: [10919]: --> [2:OK]
Aug 26 12:40:05.34: [10919]: MODEM set DTR OFF
Aug 26 12:40:05.34: [10919]: SESSION END




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*