Re: [hylafax-users] Modem Blaster DE5625

[Giulio Orsero <giulioo@pobox.com>]

On Wed, 14 Aug 2002 14:50:00 -0500, "M.D. Wills" <mdw@martinwills.com>
wrote:

>software flow control.  When looking at their sheet of AT commands and 
>talking to them on the the phone (if you can really call it technical 
>support) they have no idea which if any of the AT&K# commands work or 
>what they do.  Has anyone had any empiricial experience with this setup? 

Also, look into the windows .inf file they provide

This is from a rockwell based, old firmware
...
...
HKR, Settings, FlowControl_Off,         , "&K"
HKR, Settings, FlowControl_Hard,        , "&K3"
HKR, Settings, FlowControl_Soft,        , "&K4"
...
...

This is from a rockwell based, new chipset/firmware
...
HKR, Settings, FlowControl_Off,		, "+IFC=0,0;"
HKR, Settings, FlowControl_Hard,	, "+IFC=2,2;"
HKR, Settings, FlowControl_Soft,	, "+IFC=1,1;"
...

but &k still works even for the new one.

-- 
giulioo@pobox.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*