Re: [hylafax-users] Modem Blaster DE5625

[Giulio Orsero <giulioo@pobox.com>]

On Wed, 14 Aug 2002 14:50:00 -0500, "M.D. Wills" <mdw@martinwills.com>
wrote:

>change flow control to
>software flow control.  When looking at their sheet of AT commands and 
>talking to them on the the phone (if you can really call it technical 
>support) they have no idea which if any of the AT&K# commands work or 
>what they do.  Has anyone had any empiricial experience with this setup? 

1) Did you use faxsetup? 
2) If 1=yes, did it recognize the modem?
3) If 2=yes, you just need to change a line in config.<devid>
ModemFlowControl:       xonxoff
4) If 2=no, usually software flow control is &k4 when flow control is set
through &k<number>, but you would need to use
ModemFlowControl:       xonxoff
ModemSoftFlowCmd:       AT&K4
not playing with at commands directly

If 2=no, please send output of
probemodem <devid>

-- 
giulioo@pobox.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*