Re: [hylafax-users] Waiting for modem to come ready

["Josh Welch" <jwelch@buffalowildwings.com>]

Gian van der Spuy said:
>
>
> This theme seems to have come up repeatedly in discussions on
> this list, but
> I have yet to see a solution posted. So here is my scenario. If
> anyone can
> help me, please respond because I have read everything and tried
> everything to no avail.
>
> Receiving faxes works perfectly until a fax is sent.
> Sending faxes works every time.
> After sending 1 fax, the modem is left in a busy state and
> incomming calls
> are ignored. Faxes can still be sent.
> Respawning faxgetty resets the modem and everything works perfectly
> again until the next fax is sent.
>
> I have installed the hylafax-4.1.2-1rh7 rpm on an AMD K6 running Redhat
> 7.3. All the latest patches and updates are installed.
> I am using a 3com/USR message modem which I understand is essentially
> a Sportster. Run it as class 2.0 and class 1 - no change. (I have
> also tried an
> oldish 56K Compaq with a Rockwell chip in class 1 with similar results.)
> Faxgetty is running from inittab. (I have tried starting it
> before hylafax as
> someone suggested - no luck)
>
> regards
>
> --
> Gian van der Spuy            Tel. (021) 938-9412
> Dept. Medical Biochemistry
> University of Stellenbosch
> South Africa
>

Have you tried playing with the ModemResetCmds in your modem config to do a
reset after sending? I don't know that it would work, but its an idea
anyway.

HTH
Josh


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*