 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Stop and wait failure on FTS=7
- To: Volker Dormeyer <V.Dormeyer@t-online.de>
- Subject: Re: [hylafax-users] Stop and wait failure on FTS=7
- From: Lee Howard <faxguy@deanox.com>
- Cc: hylafax-users@hylafax.org
- Reply-To: faxguy@deanox.com
- Date: Thu, 23 May 2002 09:03:32 -0700
On 2002.05.23 06:14 Volker Dormeyer wrote: > But I'm wondering why the AT+FTS=7 setting does not. Was it a code > change in version 4.1.1? In 4.1.1 Class1Send*Delay was changed to Class1Send*WaitCmd. Effectively turning a software pause into a hardware pause (using +FTS). This is well documented in the release notes (see README). Apparently Sedlbauer has not implemented the +FTS command. Lee. ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
- References:
- [hylafax-users] Stop and wait failure on FTS=7
- From: Volker Dormeyer
- Re: [hylafax-users] Stop and wait failure on FTS=7
- From: Lee Howard
- Re: [hylafax-users] Stop and wait failure on FTS=7
- From: Volker Dormeyer
- Re: [hylafax-users] Stop and wait failure on FTS=7
- From: Volker Dormeyer
- [hylafax-users] Stop and wait failure on FTS=7
- Prev by Date: Re: [hylafax-users] EOP Errors & General Failures
- Next by Date: Re: [hylafax-users] Query about multi-modem fax server
- Previous by thread: Re: [hylafax-users] Stop and wait failure on FTS=7
- Next by thread: [hylafax-users] Generating lousy performance
- Index(es):
Project hosted by iFAX Solutions