HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Bad exit status



Hi. Damn, it's late and my eyes are blinking...People,
I turn back to our old PC because I don't like how the
new one behaves(a cheap Celeron+VIA PC). I  compiled
the kernel 2.4.17 in RH 7,1 to have the chance of
using the Comtrol RocketPort drivers. Evrything is
fine altough at the beginning I got this error

Mar 20 00:07:45 srvfax FaxQueuer[1770]: FIFO: Bad
modem message "P3fc3e7ff:ff" for modem ttyR4

Not present anymore.

My doubt it's if my problem is a result if something
of the old 4.1beta2 release still resides in my
machine, but I did rpm -e hylafax and deleted all the
dirs. And when I installed the new rpm(4.1.1) I used 
rpm -Uvh. For what I saw in the mailling list the
problem could be caused by a bad command in the
faxrcvd script, but it's the same that I used in the
4.1beta2

(snipped)/tiff2ps -a $1 > /spool

The  log from /var/log/messages

Mar 20 00:39:31 srvfax FaxGetty[928]: Bad exit status
0400 for "bin/faxrcvd "recvq/fax00011.tif" "ttyR4"
"00000031" """

and the log/c00000031

Mar 20 00:39:10.19: [  928]: SESSION BEGIN 00000031
351xxxxxxxxx
Mar 20 00:39:10.19: [  928]: <-- [4:ATA\r]
Mar 20 00:39:15.63: [  928]: --> [7:CONNECT]
Mar 20 00:39:15.63: [  928]: ANSWER: FAX CONNECTION
Mar 20 00:39:15.63: [  928]: RECV FAX: begin
Mar 20 00:39:15.68: [  928]: <-- data [23]
Mar 20 00:39:15.68: [  928]: <-- data [2]
Mar 20 00:39:17.31: [  928]: --> [7:CONNECT]
Mar 20 00:39:17.31: [  928]: <-- data [10]
Mar 20 00:39:17.31: [  928]: <-- data [2]
Mar 20 00:39:17.86: [  928]: --> [2:OK]
Mar 20 00:39:17.86: [  928]: <-- [9:AT+FRH=3\r]
Mar 20 00:39:18.24: [  928]: --> [7:CONNECT]
Mar 20 00:39:19.61: [  928]: --> [2:OK]
Mar 20 00:39:19.61: [  928]: REMOTE TSI "Info"
Mar 20 00:39:19.61: [  928]: <-- [9:AT+FRH=3\r]
Mar 20 00:39:19.62: [  928]: --> [7:CONNECT]
Mar 20 00:39:19.98: [  928]: --> [2:OK]
Mar 20 00:39:19.98: [  928]: REMOTE wants 14400 bit/s
Mar 20 00:39:19.98: [  928]: REMOTE wants page width
1728 pixels in 215 mm
Mar 20 00:39:19.98: [  928]: REMOTE wants unlimited
page length 
Mar 20 00:39:19.98: [  928]: REMOTE wants 7.7 line/mm
Mar 20 00:39:19.98: [  928]: REMOTE wants 1-D MR
Mar 20 00:39:19.98: [  928]: RECV training at v.17
14400 bit/s
Mar 20 00:39:19.98: [  928]: <-- [11:AT+FRM=145\r]
Mar 20 00:39:21.79: [  928]: --> [7:CONNECT]
Mar 20 00:39:23.34: [  928]: RECV: TCF 2752 bytes, 1%
non-zero, 2699 zero-run
Mar 20 00:39:23.34: [  928]: --> [10:NO CARRIER]
Mar 20 00:39:23.34: [  928]: DELAY 75 ms
Mar 20 00:39:23.42: [  928]: <-- [9:AT+FTH=3\r]
Mar 20 00:39:23.46: [  928]: --> [7:CONNECT]
Mar 20 00:39:23.46: [  928]: <-- data [3]

Mar 20 00:39:23.46: [  928]: <-- data [2]
Mar 20 00:39:24.78: [  928]: --> [2:OK]
Mar 20 00:39:24.78: [  928]: TRAINING succeeded
Mar 20 00:39:24.78: [  928]: <-- [11:AT+FRM=146\r]
Mar 20 00:39:25.17: [  928]: --> [7:CONNECT]
Mar 20 00:39:25.17: [  928]: RECV: begin page
Mar 20 00:39:27.67: [  928]: RECV: 490 total lines, 0
bad lines, 0 consecutive bad lines
Mar 20 00:39:27.67: [  928]: RECV: end page
Mar 20 00:39:27.67: [  928]: --> [10:NO CARRIER]
Mar 20 00:39:27.67: [  928]: <-- [9:AT+FRH=3\r]
Mar 20 00:39:28.02: [  928]: --> [7:CONNECT]
Mar 20 00:39:28.91: [  928]: --> [2:OK]
Mar 20 00:39:28.91: [  928]: RECV recv EOP (no more
pages or documents)
Mar 20 00:39:28.91: [  928]: DELAY 150 ms
Mar 20 00:39:29.06: [  928]: <-- [9:AT+FTH=3\r]
Mar 20 00:39:29.11: [  928]: --> [7:CONNECT]
Mar 20 00:39:29.11: [  928]: <-- data [3]
Mar 20 00:39:29.11: [  928]: <-- data [2]
Mar 20 00:39:30.42: [  928]: --> [2:OK]
Mar 20 00:39:30.42: [  928]: RECV send MCF (message
confirmation)
Mar 20 00:39:30.42: [  928]: RECV FAX (00000031): from
BPN-CRDITUS, page 1 in 0:06, INF, 7.7 line/mm, 1-D MR,
14400 bit/s
Mar 20 00:39:30.42: [  928]: RECV FAX (00000031):
recvq/fax00011.tif from Info, route to <unspecified>,
1 pages in 0:15
Mar 20 00:39:30.43: [  928]: <-- [9:AT+FRH=3\r]
Mar 20 00:39:30.79: [  928]: --> [7:CONNECT]
Mar 20 00:39:31.63: [  928]: --> [2:OK]
Mar 20 00:39:31.63: [  928]: RECV FAX: bin/faxrcvd
"recvq/fax00011.tif" "ttyR4" "00000031" ""
Mar 20 00:39:31.71: [  928]: RECV FAX: end
Mar 20 00:39:31.71: [  928]: SESSION END

Any advice?

__________________________________________________
Do You Yahoo!?
Yahoo! Sports - live college hoops coverage
http://sports.yahoo.com/

____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions