[hylafax-users] Caldera OpenLinux 3.1 Server And Hylafax no DIS error.

[Murat <murat@prosoft.com.tr>]

Hello,

I try to setup last version of Hylafax server on OpenLinux 3.1 Server. 
There is no problem when sending the fax anywhere. On the
other hand, when receiving the fax the fax server say >>

======================================================

An attempt to receive facsimile on ttyS1 failed because:

    COMREC invalid command received/no DIS or DTC

    ---- Transcript of session follows ----

Feb 27 12:12:44.77: [ 1009]: SESSION BEGIN 00000024 903124466616
Feb 27 12:12:44.77: [ 1009]: <-- [4:ATA\r]
Feb 27 12:12:51.84: [ 1009]: --> [5:+FCON]
Feb 27 12:12:51.84: [ 1009]: ANSWER: FAX CONNECTION
Feb 27 12:12:51.84: [ 1009]: RECV FAX: begin
Feb 27 12:12:59.91: [ 1009]: --> [28:+FTSI:"      90 312 4462423"]
Feb 27 12:12:59.91: [ 1009]: REMOTE TSI "90 312 4462423"
Feb 27 12:12:59.91: [ 1009]: --> [21:+FDCS:0,3,0,2,0,0,0,0]
Feb 27 12:12:59.91: [ 1009]: REMOTE wants 9600 bit/s
Feb 27 12:12:59.91: [ 1009]: REMOTE wants page width 1728 pixels in 215 mm
Feb 27 12:12:59.91: [ 1009]: REMOTE wants unlimited page length
Feb 27 12:12:59.91: [ 1009]: REMOTE wants 3.85 line/mm
Feb 27 12:12:59.91: [ 1009]: REMOTE wants 1-D MR
Feb 27 12:13:00.38: [ 1009]: --> [2:OK]
Feb 27 12:13:00.38: [ 1009]: <-- [7:AT+FDR\r]
Feb 27 12:13:03.00: [ 1009]: --> [5:+FCFR]
Feb 27 12:13:03.00: [ 1009]: --> [21:+FDCS:0,3,0,2,0,0,0,0]
Feb 27 12:13:03.00: [ 1009]: REMOTE wants 9600 bit/s
Feb 27 12:13:03.00: [ 1009]: REMOTE wants page width 1728 pixels in 215 mm
Feb 27 12:13:03.00: [ 1009]: REMOTE wants unlimited page length
Feb 27 12:13:03.00: [ 1009]: REMOTE wants 3.85 line/mm
Feb 27 12:13:03.00: [ 1009]: REMOTE wants 1-D MR
Feb 27 12:13:04.26: [ 1009]: --> [7:CONNECT]
Feb 27 12:13:04.26: [ 1009]: RECV: begin page
Feb 27 12:13:04.26: [ 1009]: RECV: send trigger 022
Feb 27 12:13:29.86: [ 1009]: RECV: 968 total lines, 219 bad lines, 22 consecutive bad lines
Feb 27 12:13:29.86: [ 1009]: --> [7:+FPTS:1]
Feb 27 12:13:31.34: [ 1009]: --> [6:+FET:2]
Feb 27 12:13:31.34: [ 1009]: RECV recv EOP (no more pages or documents)
Feb 27 12:13:31.34: [ 1009]: --> [2:OK]
Feb 27 12:13:31.34: [ 1009]: RECV: REJECT page quality, 77% good lines (95% required)
Feb 27 12:13:31.34: [ 1009]: RECV send RTN (retrain negative)
Feb 27 12:13:31.34: [ 1009]: <-- [10:AT+FPTS=2\r]
Feb 27 12:13:31.57: [ 1009]: --> [2:OK]
Feb 27 12:13:31.57: [ 1009]: <-- [7:AT+FDR\r]
Feb 27 12:13:35.05: [ 1009]: --> [8:+FHNG:23]
Feb 27 12:13:35.05: [ 1009]: REMOTE HANGUP: COMREC invalid command received/no DIS or DTC (code 23)
Feb 27 12:13:35.05: [ 1009]: RECV FAX (00000024): recvq/fax00008.tif from 90 312 4462423, route to <unspecified>, 0 pages in 0:44
Feb 27 12:13:35.06: [ 1009]: RECV FAX: COMREC invalid command received/no DIS or DTC
Feb 27 12:13:35.06: [ 1009]: RECV FAX (00000024): session with 90 312 4462423 terminated abnormally: COMREC invalid command received/no DIS or DTC
Feb 27 12:13:35.06: [ 1009]: RECV FAX: bin/faxrcvd "recvq/fax00008.tif" "ttyS1" "00000024" "COMREC invalid command received/no DIS or DTC"


===================================================================================================

Our modem in class 2 stage and Etech E288 standart external modem. What is the problem? Is there any body
who help me about that problem.

My best regards.

Murat 




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null