Re: [hylafax-users] Connects but no fax

["S. Ancelot" <sancelot@online.fr>]

What did you used to  create the ps document ?

A postcript printer driver ? which one ? (A HP postcript driver does not work
finew, since it inserts PCl commands in it !)

Try downloading adobe generic postscript  printer driver from adobe site, I
know it works fine .





Graeme Walker wrote:

> Hi
>
> I am using WHFC attaching a Postscript document, nothing comes out, the line
> drops virtually instantly when handshaking starts.
>
> Graeme
> ----- Original Message -----
> From: "Chuck Wolber" <chuckw@altaserv.net>
> To: "Graeme Walker" <hylafax@walk.co.za>
> Sent: Thursday, October 11, 2001 6:06 PM
> Subject: Re: [hylafax-users] Connects but no fax
>
> >
> >
> > On Thu, 11 Oct 2001, Graeme Walker wrote:
> >
> > > Hi
> > >
> > > Tried Class 1 now I get the following, same seneraio, dialups,
> handshakes,
> > > line drops
> >
> > %< SNIP
> >
> > > Oct 11 09:05:43.66: [ 5622]: USE 14400 bit/s
> > > Oct 11 09:05:43.66: [ 5622]: USE 10 ms, 5 ms/scanline
> > > Oct 11 09:05:43.66: [ 5622]: <-- [9:AT+FTH=3\r]
> > > Oct 11 09:05:43.85: [ 5622]: --> [7:CONNECT]
> > > Oct 11 09:05:43.85: [ 5622]: <-- data [3]
> > > Oct 11 09:05:43.85: [ 5622]: <-- data [2]
> > > Oct 11 09:05:45.03: [ 5622]: --> [2:OK]
> > > Oct 11 09:05:45.03: [ 5622]: <-- [5:ATH0\r]
> > > Oct 11 09:05:45.26: [ 5622]: --> [2:OK]
> > > Oct 11 09:05:45.26: [ 5622]: SESSION END
> >
> > %< SNIP
> >
> >
> > The negotiation looks good to me, although I am pretty new at this. What
> > sort of data file are you trying to send? Is anything at all coming out on
> > the receiving end?
> >
> > --
> > Chuck Wolber
> > System Administrator
> > AltaServ Corporation
> > (425)576-1202
> > ten.vresatla@wkcuhc    "Condense facts from the vapor of nuance."
> >
> >
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null