Re: [hylafax-users] Connects but no fax

["Graeme Walker" <hylafax@walk.co.za>]

Hi

I am using WHFC attaching a Postscript document, nothing comes out, the line
drops virtually instantly when handshaking starts.

Graeme
----- Original Message -----
From: "Chuck Wolber" <chuckw@altaserv.net>
To: "Graeme Walker" <hylafax@walk.co.za>
Sent: Thursday, October 11, 2001 6:06 PM
Subject: Re: [hylafax-users] Connects but no fax


>
>
> On Thu, 11 Oct 2001, Graeme Walker wrote:
>
> > Hi
> >
> > Tried Class 1 now I get the following, same seneraio, dialups,
handshakes,
> > line drops
>
> %< SNIP
>
> > Oct 11 09:05:43.66: [ 5622]: USE 14400 bit/s
> > Oct 11 09:05:43.66: [ 5622]: USE 10 ms, 5 ms/scanline
> > Oct 11 09:05:43.66: [ 5622]: <-- [9:AT+FTH=3\r]
> > Oct 11 09:05:43.85: [ 5622]: --> [7:CONNECT]
> > Oct 11 09:05:43.85: [ 5622]: <-- data [3]
> > Oct 11 09:05:43.85: [ 5622]: <-- data [2]
> > Oct 11 09:05:45.03: [ 5622]: --> [2:OK]
> > Oct 11 09:05:45.03: [ 5622]: <-- [5:ATH0\r]
> > Oct 11 09:05:45.26: [ 5622]: --> [2:OK]
> > Oct 11 09:05:45.26: [ 5622]: SESSION END
>
> %< SNIP
>
>
> The negotiation looks good to me, although I am pretty new at this. What
> sort of data file are you trying to send? Is anything at all coming out on
> the receiving end?
>
> --
> Chuck Wolber
> System Administrator
> AltaServ Corporation
> (425)576-1202
> ten.vresatla@wkcuhc    "Condense facts from the vapor of nuance."
>
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null