Re: [hylafax-users] Connects but no fax

["S. Ancelot" <sancelot@online.fr>]

This looks like an additionnal "\n" is sent immediately after sending dial
number,
what is the order used to send the fax ?


Graeme Walker wrote:

> Hi
>
> I have Hylafax 4.1, preinstalled with Mandrake 8.1
> I run the faxsetup and faxaddmodem and all is fine.
> I can submit a job, it dials, handshakes and drops the line, never sends the
> fax, attached is from the log file.
> Please help
>
> Thanks
>
> Graeme
>
> Oct 10 11:16:02.13: [ 2914]: SESSION BEGIN 00000006 27118861109
> Oct 10 11:16:02.13: [ 2914]: HylaFAX (tm) Version 4.1
> Oct 10 11:16:02.13: [ 2914]: SEND FAX: JOB 12 DEST 0118861109 COMMID
> 00000006
> Oct 10 11:16:02.13: [ 2914]: DEVICE '/dev/ttyS0'
> Oct 10 11:16:02.13: [ 2914]: DELAY 75 ms
> Oct 10 11:16:02.21: [ 2914]: DELAY 2600 ms
> Oct 10 11:16:04.81: [ 2914]: <-- [4:ATZ\r]
> Oct 10 11:16:04.94: [ 2914]: --> [2:OK]
> Oct 10 11:16:04.94: [ 2914]: <-- [5:ATE0\r]
> Oct 10 11:16:05.07: [ 2914]: --> [4:ATE0]
> Oct 10 11:16:05.07: [ 2914]: --> [2:OK]
> Oct 10 11:16:05.07: [ 2914]: <-- [5:ATV1\r]
> Oct 10 11:16:05.20: [ 2914]: --> [2:OK]
> Oct 10 11:16:05.20: [ 2914]: <-- [7:ATQ0X4\r]
> Oct 10 11:16:05.33: [ 2914]: --> [2:OK]
> Oct 10 11:16:05.33: [ 2914]: <-- [7:ATS0=0\r]
> Oct 10 11:16:05.46: [ 2914]: --> [2:OK]
> Oct 10 11:16:05.46: [ 2914]: <-- [7:ATS8=2\r]
> Oct 10 11:16:05.59: [ 2914]: --> [2:OK]
> Oct 10 11:16:05.59: [ 2914]: <-- [8:ATS7=60\r]
> Oct 10 11:16:05.72: [ 2914]: --> [2:OK]
> Oct 10 11:16:05.72: [ 2914]: <-- [12:AT&H1&I0&R2\r]
> Oct 10 11:16:05.86: [ 2914]: --> [2:OK]
> Oct 10 11:16:05.86: [ 2914]: <-- [11:ATS13=1&D2\r]
> Oct 10 11:16:06.00: [ 2914]: --> [2:OK]
> Oct 10 11:16:06.00: [ 2914]: <-- [6:AT&C1\r]
> Oct 10 11:16:06.13: [ 2914]: --> [2:OK]
> Oct 10 11:16:06.13: [ 2914]: <-- [14:AT+FCLASS=2.0\r]
> Oct 10 11:16:06.27: [ 2914]: --> [2:OK]
> Oct 10 11:16:06.27: [ 2914]: <-- [9:AT+FLO=2\r]
> Oct 10 11:16:06.41: [ 2914]: --> [2:OK]
> Oct 10 11:16:06.41: [ 2914]: <-- [9:AT+FPP=0\r]
> Oct 10 11:16:06.55: [ 2914]: --> [2:OK]
> Oct 10 11:16:06.55: [ 2914]: <-- [9:AT+FBO=0\r]
> Oct 10 11:16:06.69: [ 2914]: --> [2:OK]
> Oct 10 11:16:06.69: [ 2914]: <-- [10:AT+FCT=30\r]
> Oct 10 11:16:06.83: [ 2914]: --> [2:OK]
> Oct 10 11:16:06.83: [ 2914]: <-- [15:AT+FNR=1,1,1,0\r]
> Oct 10 11:16:06.97: [ 2914]: --> [2:OK]
> Oct 10 11:16:06.97: [ 2914]: <-- [9:AT+FIE=0\r]
> Oct 10 11:16:07.11: [ 2914]: --> [2:OK]
> Oct 10 11:16:07.11: [ 2914]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Oct 10 11:16:07.25: [ 2914]: --> [2:OK]
> Oct 10 11:16:07.25: [ 2914]: <-- [5:ATM1\r]
> Oct 10 11:16:07.38: [ 2914]: --> [2:OK]
> Oct 10 11:16:07.38: [ 2914]: <-- [14:AT+FCLASS=2.0\r]
> Oct 10 11:16:07.62: [ 2914]: --> [2:OK]
> Oct 10 11:16:07.62: [ 2914]: <-- [9:AT+FLO=2\r]
> Oct 10 11:16:07.86: [ 2914]: --> [2:OK]
> Oct 10 11:16:07.86: [ 2914]: <-- [9:AT+FPP=0\r]
> Oct 10 11:16:08.10: [ 2914]: --> [2:OK]
> Oct 10 11:16:08.10: [ 2914]: <-- [9:AT+FBO=0\r]
> Oct 10 11:16:08.34: [ 2914]: --> [2:OK]
> Oct 10 11:16:08.34: [ 2914]: <-- [10:AT+FCT=30\r]
> Oct 10 11:16:08.58: [ 2914]: --> [2:OK]
> Oct 10 11:16:08.58: [ 2914]: <-- [15:AT+FNR=1,1,1,0\r]
> Oct 10 11:16:08.82: [ 2914]: --> [2:OK]
> Oct 10 11:16:08.82: [ 2914]: <-- [9:AT+FIE=0\r]
> Oct 10 11:16:09.06: [ 2914]: --> [2:OK]
> Oct 10 11:16:09.06: [ 2914]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
> Oct 10 11:16:09.30: [ 2914]: --> [2:OK]
> Oct 10 11:16:09.30: [ 2914]: <-- [16:AT+FLI="Walker"\r]
> Oct 10 11:16:09.54: [ 2914]: --> [2:OK]
> Oct 10 11:16:09.54: [ 2914]: DIAL 0118861109
> Oct 10 11:16:09.54: [ 2914]: <-- [15:ATDT0118861109\r]
> Oct 10 11:16:25.25: [ 2914]: --> [4:+FCO]
> Oct 10 11:16:28.51: [ 2914]: --> [27:+FCI:"          0117874684"]
> Oct 10 11:16:28.51: [ 2914]: REMOTE CSI "0117874684"
> Oct 10 11:16:28.51: [ 2914]: --> [20:+FIS:1,5,0,2,1,0,0,2]
> Oct 10 11:16:28.51: [ 2914]: --> [2:OK]
> Oct 10 11:16:28.51: [ 2914]: REMOTE best rate 14400 bit/s
> Oct 10 11:16:28.51: [ 2914]: REMOTE max page width 1728 pixels in 215 mm
> Oct 10 11:16:28.51: [ 2914]: REMOTE max unlimited page length
> Oct 10 11:16:28.51: [ 2914]: REMOTE best vres 7.7 line/mm
> Oct 10 11:16:28.51: [ 2914]: REMOTE best format 2-D MR
> Oct 10 11:16:28.51: [ 2914]: REMOTE best 10 ms, 5 ms/scanline
> Oct 10 11:16:28.51: [ 2914]: USE 14400 bit/s
> Oct 10 11:16:28.51: [ 2914]: USE 10 ms, 5 ms/scanline
> Oct 10 11:16:28.51: [ 2914]: <-- [5:ATH0\r]
> Oct 10 11:16:28.74: [ 2914]: --> [2:OK]
> Oct 10 11:16:28.74: [ 2914]: SESSION END
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null