[hylafax-users] problem faxing with window98 client to halifax server

To: hylafax-users@hylafax.org
Subject: [hylafax-users] problem faxing with window98 client to halifax server
From: "Junaidi Sapari" <suicidal@pacific.net.sg>
Date: Thu, 11 Oct 2001 16:32:42 +0800
Hi, can anybody help 

There is no problem if i were to send fax with the server using the command line. 
But if i were to use a client windows98 machine to send fax to my linux halifax server to another destination, the log shows ATH0/r, hanging up. Below is the log. 


Oct 11 15:00:53.67: [ 2407]: SESSION BEGIN 00000016 654155570926 
Oct 11 15:00:53.67: [ 2407]: HylaFAX (tm) Version 4.1 
Oct 11 15:00:53.67: [ 2407]: SEND FAX: JOB 14 DEST 5570926 COMMID 00000016 
Oct 11 15:00:53.67: [ 2407]: DEVICE '/dev/ttyS0'      Oct 11 15:00:53.67: [ 2407]: DELAY 75 ms 
Oct 11 15:00:53.75: [ 2407]: DELAY 2600 ms 
Oct 11 15:00:56.35: [ 2407]: <-- [4:ATZ\r] 
Oct 11 15:00:56.46: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.46: [ 2407]: <-- [5:ATE0\r] 
Oct 11 15:00:56.47: [ 2407]: --> [4:ATE0] 
Oct 11 15:00:56.47: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.47: [ 2407]: <-- [5:ATV1\r] 
Oct 11 15:00:56.48: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.48: [ 2407]: <-- [5:ATQ0\r] 
Oct 11 15:00:56.49: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.49: [ 2407]: <-- [7:ATS0=0\r] 
Oct 11 15:00:56.50: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.50: [ 2407]: <-- [7:ATS8=2\r] 
Oct 11 15:00:56.51: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.51: [ 2407]: <-- [8:ATS7=60\r] 
Oct 11 15:00:56.52: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.52: [ 2407]: <-- [6:AT&K4\r] 
Oct 11 15:00:56.53: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.53: [ 2407]: <-- [6:AT&D3\r] 
Oct 11 15:00:56.54: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.54: [ 2407]: <-- [6:AT&C1\r] 
Oct 11 15:00:56.55: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.55: [ 2407]: <-- [12:AT+FCLASS=2\r] 
Oct 11 15:00:56.56: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.56: [ 2407]: <-- [10:AT+FTBC=0\r] 
Oct 11 15:00:56.57: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.57: [ 2407]: <-- [10:AT+FBOR=0\r] 
Oct 11 15:00:56.58: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.58: [ 2407]: <-- [13:AT+FPHCTO=30\r] 
Oct 11 15:00:56.59: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.59: [ 2407]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] 
Oct 11 15:00:56.60: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.60: [ 2407]: <-- [7:ATL2M1\r] 
Oct 11 15:00:56.61: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.61: [ 2407]: <-- [12:AT+FCLASS=2\r] 
Oct 11 15:00:56.72: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.72: [ 2407]: <-- [10:AT+FTBC=0\r] 
Oct 11 15:00:56.83: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.83: [ 2407]: <-- [10:AT+FBOR=0\r] 
Oct 11 15:00:56.94: [ 2407]: --> [2:OK] 
Oct 11 15:00:56.94: [ 2407]: <-- [13:AT+FPHCTO=30\r] 
Oct 11 15:00:57.05: [ 2407]: --> [2:OK] 
Oct 11 15:00:57.05: [ 2407]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] 
Oct 11 15:00:57.16: [ 2407]: --> [2:OK] 
Oct 11 15:00:57.16: [ 2407]: <-- [23:AT+FLID="NothingSetup"\r] 
Oct 11 15:00:57.27: [ 2407]: --> [2:OK] 
Oct 11 15:00:57.27: [ 2407]: DIAL 5570926 
Oct 11 15:00:57.27: [ 2407]: <-- [12:ATDT5570926\r] 
Oct 11 15:01:09.85: [ 2407]: --> [5:+FCON] 
Oct 11 15:01:12.91: [ 2407]: --> [29:+FCSI: " 5570926"] 
Oct 11 15:01:12.91: [ 2407]: REMOTE CSI "5570926" 
Oct 11 15:01:13.37: [ 2407]: --> [22:+FDIS: 1,5,0,2,1,0,0,3] 
Oct 11 15:01:13.48: [ 2407]: --> [2:OK] 
Oct 11 15:01:13.48: [ 2407]: REMOTE best rate 14400 bit/s 
Oct 11 15:01:13.48: [ 2407]: REMOTE max page width 1728 pixels in 215 mm 

Oct 11 15:01:13.48: [ 2407]: REMOTE max unlimited page length 
Oct 11 15:01:13.48: [ 2407]: REMOTE best vres 7.7 line/mm 
Oct 11 15:01:13.48: [ 2407]: REMOTE best format 2-D MR 
Oct 11 15:01:13.48: [ 2407]: REMOTE best 10 ms/scanline 
Oct 11 15:01:13.48: [ 2407]: USE 14400 bit/s 
Oct 11 15:01:13.48: [ 2407]: USE 10 ms/scanline 
Oct 11 15:01:13.48: [ 2407]: <-- [5:ATH0\r] <-------?? 
Oct 11 15:01:13.73: [ 2407]: --> [9:+FHNG: 20] 
Oct 11 15:01:13.73: [ 2407]: REMOTE HANGUP: Unspecified Transmit Phase B 
error (code 20) 
Oct 11 15:01:14.32: [ 2407]: --> [2:OK] 
Oct 11 15:01:14.32: [ 2407]: SESSION END 


Below is another log when i use the server directly to send a fax out. 

Oct 11 13:31:46.05: [ 1966]: SESSION BEGIN 00000013 654155570926 
Oct 11 13:31:46.05: [ 1966]: HylaFAX (tm) Version 4.1 
Oct 11 13:31:46.05: [ 1966]: SEND FAX: JOB 11 DEST 5570926 COMMID 00000013 
Oct 11 13:31:46.05: [ 1966]: DEVICE '/dev/ttyS0' 
Oct 11 13:31:46.05: [ 1966]: DELAY 75 ms 
Oct 11 13:31:46.13: [ 1966]: DELAY 2600 ms 
Oct 11 13:31:48.73: [ 1966]: <-- [4:ATZ\r] 
Oct 11 13:31:48.84: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.84: [ 1966]: <-- [5:ATE0\r] 
Oct 11 13:31:48.85: [ 1966]: --> [4:ATE0] 
Oct 11 13:31:48.85: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.85: [ 1966]: <-- [5:ATV1\r] 
Oct 11 13:31:48.86: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.86: [ 1966]: <-- [5:ATQ0\r] 
Oct 11 13:31:48.87: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.87: [ 1966]: <-- [7:ATS0=0\r] 
Oct 11 13:31:48.88: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.88: [ 1966]: <-- [7:ATS8=2\r] 
Oct 11 13:31:48.89: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.89: [ 1966]: <-- [8:ATS7=60\r] 
Oct 11 13:31:48.90: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.90: [ 1966]: <-- [6:AT&K4\r] 
Oct 11 13:31:48.91: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.91: [ 1966]: <-- [6:AT&D3\r] 
Oct 11 13:31:48.92: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.92: [ 1966]: <-- [6:AT&C1\r] 
Oct 11 13:31:48.93: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.93: [ 1966]: <-- [12:AT+FCLASS=2\r] 
Oct 11 13:31:48.94: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.94: [ 1966]: <-- [10:AT+FTBC=0\r] 
Oct 11 13:31:48.95: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.95: [ 1966]: <-- [10:AT+FBOR=0\r] 
Oct 11 13:31:48.96: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.96: [ 1966]: <-- [13:AT+FPHCTO=30\r] 
Oct 11 13:31:48.97: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.97: [ 1966]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] 
Oct 11 13:31:48.98: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.98: [ 1966]: <-- [7:ATL2M1\r] 
Oct 11 13:31:48.99: [ 1966]: --> [2:OK] 
Oct 11 13:31:48.99: [ 1966]: <-- [12:AT+FCLASS=2\r] 
Oct 11 13:31:49.10: [ 1966]: --> [2:OK] 
Oct 11 13:31:49.10: [ 1966]: <-- [10:AT+FTBC=0\r] 
Oct 11 13:31:49.21: [ 1966]: --> [2:OK] 
Oct 11 13:31:49.21: [ 1966]: <-- [10:AT+FBOR=0\r] 
Oct 11 13:31:49.32: [ 1966]: --> [2:OK] 
Oct 11 13:31:49.32: [ 1966]: <-- [13:AT+FPHCTO=30\r] 
Oct 11 13:31:49.43: [ 1966]: --> [2:OK] 
Oct 11 13:31:49.43: [ 1966]: <-- [24:AT+FDCC=1,5,2,2,0,0,0,0\r] 
Oct 11 13:31:49.54: [ 1966]: --> [2:OK] 
Oct 11 13:31:49.54: [ 1966]: <-- [23:AT+FLID="NothingSetup"\r] 
Oct 11 13:31:49.65: [ 1966]: --> [2:OK] 
Oct 11 13:31:49.65: [ 1966]: DIAL 5570926 
Oct 11 13:31:49.65: [ 1966]: <-- [12:ATDT5570926\r] 
Oct 11 13:32:00.39: [ 1966]: --> [5:+FCON] 
Oct 11 13:32:03.43: [ 1966]: --> [29:+FCSI: " 5570926"] 
Oct 11 13:32:03.43: [ 1966]: REMOTE CSI "5570926" 
Oct 11 13:32:03.88: [ 1966]: --> [22:+FDIS: 1,5,0,2,1,0,0,3] 
Oct 11 13:32:03.99: [ 1966]: --> [2:OK] 
Oct 11 13:32:03.99: [ 1966]: REMOTE best rate 14400 bit/s 
Oct 11 13:32:03.99: [ 1966]: REMOTE max page width 1728 pixels in 215 mm 

Oct 11 13:32:03.99: [ 1966]: REMOTE max unlimited page length 
Oct 11 13:32:03.99: [ 1966]: REMOTE best vres 7.7 line/mm 
Oct 11 13:32:03.99: [ 1966]: REMOTE best format 2-D MR 
Oct 11 13:32:03.99: [ 1966]: REMOTE best 10 ms/scanline 
Oct 11 13:32:03.99: [ 1966]: USE 14400 bit/s 
Oct 11 13:32:03.99: [ 1966]: USE 10 ms/scanline 
Oct 11 13:32:03.99: [ 1966]: SEND file "docq/doc4.ps;30" 
Oct 11 13:32:03.99: [ 1966]: USE page width 1728 pixels in 215 mm 
Oct 11 13:32:03.99: [ 1966]: USE unlimited page length 
Oct 11 13:32:03.99: [ 1966]: USE 3.85 line/mm 
Oct 11 13:32:03.99: [ 1966]: USE 1-D MR 
Oct 11 13:32:03.99: [ 1966]: <-- [24:AT+FDIS=0,5,0,2,0,0,0,3\r] 
Oct 11 13:32:04.11: [ 1966]: --> [2:OK] 
Oct 11 13:32:04.11: [ 1966]: <-- [7:AT+FDT\r] 
Oct 11 13:32:12.03: [ 1966]: --> [22:+FDCS: 0,5,0,2,0,0,0,3] 
Oct 11 13:32:12.03: [ 1966]: --> [7:CONNECT] 
Oct 11 13:32:12.03: [ 1966]: SEND wait for XON 
Oct 11 13:32:12.03: [ 1966]: --> [1:] 
Oct 11 13:32:12.03: [ 1966]: SEND begin page 
Oct 11 13:32:12.03: [ 1966]: <-- data [1031] 
Oct 11 13:32:12.03: [ 1966]: <-- data [737] 
Oct 11 13:32:12.03: [ 1966]: SENT 1758 bytes of data 
Oct 11 13:32:12.03: [ 1966]: <-- data [2] 
Oct 11 13:32:12.50: [ 1966]: SEND end page 
Oct 11 13:32:14.28: [ 1966]: --> [2:OK] 
Oct 11 13:32:14.28: [ 1966]: SEND send EOP (no more pages or documents) 
Oct 11 13:32:14.28: [ 1966]: <-- [9:AT+FET=2\r] 
Oct 11 13:32:17.02: [ 1966]: --> [8:+FPTS: 1] 
Oct 11 13:32:18.65: [ 1966]: --> [8:+FHNG: 0] 
Oct 11 13:32:18.65: [ 1966]: REMOTE HANGUP: Normal and proper end of connection (code 0) 
Oct 11 13:32:18.65: [ 1966]: SEND recv MCF (message confirmation) 
Oct 11 13:32:18.65: [ 1966]: SEND FAX (00000013): FROM me@192.168.0.117 
TO 5570926 (page 1 of 1 sent in 0:15) 
Oct 11 13:32:18.65: [ 1966]: SEND FAX (00000013): FROM me@192.168.0.117 
TO 5570926 (docq/doc4.ps;30 sent in 0:15) 
Oct 11 13:32:18.65: [ 1966]: <-- [5:ATH0\r] 
Oct 11 13:32:19.25: [ 1966]: --> [2:OK] 
Oct 11 13:32:19.25: [ 1966]: SESSION END 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
Follow-Ups:
- Re: [hylafax-users] problem faxing with window98 client to halifax server
  - From: S. Ancelot
Prev by Date: Re: [hylafax-users] Connects but no fax
Next by Date: [hylafax-users] sendfax tag line problem
Previous by thread: [hylafax-users] 2 different taglines from Win Client
Next by thread: Re: [hylafax-users] problem faxing with window98 client to halifax server
Index(es):
- Main
- Thread
Project hosted by iFAX Solutions