Re: [hylafax-users] Problem sending faxes

[Jim Jennis <jhjennis@shentel.net>]

At 14:05 10/8/2001 -0500, you wrote:
>What are you using for a client?(WHFC, Cypheus, custom?)
>----- Original Message -----
>From: "Jim Jennis" <jhjennis@shentel.net>
>To: <hylafax-users@hylafax.org>
>Sent: Monday, October 08, 2001 11:36 AM
>Subject: [hylafax-users] Problem sending faxes
Hi Josh...thanks for writing back..

i'm using Whfc.
If I run the commmand :

faxstat -s 

I get...

HylaFAX scheduler on plalinux.com: Running
Modem ttyS0 (244257) : Running and idle

after i send a fax via Whfc client, 

faxstat -s 

gives the same output

Hylafax scheduler on plalinux.com : Running
Modem  ttyS0 (244257) : Running and idle

JID Pri    S    Owner    Number  Pages  Dials    TTS Status
30  127  W  placivita    247          0:0      0:12

however, tail -f on the /var/log/messages file shows

sendfax job 31 dest 247 commid 00000268
send failed : job 31 dest 247 err can not setup modem
error writing send accounting record dest 247
notify ...sendq/q31 requeued

Regards,

Jim
>
>
>> Hi All!
>>
>> I am new to hylafax and this is my first posting to the list. I helped a
>> colleague set up a fax server using hylafax 4.1 on a plain vanilla server
>> running Redhat Linux 6.2 (2.2-14 kernel). I installed a US Robotics
>> Sportster fax modem on /dev/ttyS0 and installed and configured the
>> software. The server will receive faxes and print them on lp0 just fine.
>> However, when I try to send a fax from a client (windoze machine) nothing
>> works correctly. Here is a sample of what I am seeing in my messages
>file..
>>
>> tail -f /var/log/messages :
>> ...
>> FaxSend[1005]: MODEM input buffering disabled
>> FaxSend[1005]: Hylafax (tm) Version 4.1
>> FaxSend[1005]: SEND FAX : JOB 27 DEST 247 COMMID 00000254
>> FaxSend[1005]: DEVICE '/dev/ttyS0'
>> FaxSend[1005]: SEND FAILED : JOB 27 DEST 247 Can not setup modem
>> FaxSend[1005]: Error writing SEND accounting record, dest=247
>> FaxQueuer[737]: NOTIFY: bin/notify "sendq/q27" "requeued" "23:31"
>> FaxGetty[794]: Modem set DTR OFF
>> FaxGetty[794]: Modem set DTR ON
>> FaxGetty[794]: MODEM set baud rate : 38400 baud, input flow RTS/CTS,
>output
>> RTS/CTS
>> FaxGetty[794]: MODEM flush i/o
>> FaxGetty[794]: <-- [4:ATZ\r]
>> FaxGetty[794]: --> [3:ATZ]
>> FaxGetty[794]: --> [2:OK]
>> FaxGetty[794]: <-- [5:ATE0\r]
>> FaxGetty[794]: MODEM TIMEOUT: reading line from modem
>> FaxGetty[794]: MODEM <Timeout>
>> FaxGetty[794]: Modem set DTR OFF
>> FaxGetty[794]: Modem set DTR OFF
>> FaxGetty[794]: Modem set DTR ON
>>
>> So far I have not found any help in the man files, readmes and faq's.
>>
>> TIA for any help.
>>
>> Regards,
>>
>> Jim
>>
>> Jim Jennis, Senior Project Manager
>> WRQ Consulting Services, Inc.
>> 37 W. Bond St.
>> Winchester, VA. 22601 USA.
>>
>> Phone: +001-540-723-0157
>> FAX: +001-206-272-1394
>> Email:jimj@wrq.com
>>       jhjennis@shentel.net
>> Web:   http://www.wrq.com/
>> ---------------------------------------------------
>>
>>
>>
>> ____________________ HylaFAX(tm) Users Mailing List
>_______________________
>>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
>/dev/null
>>
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null