Re: [hylafax-users] hylafax server setup

["Jay Langford" <jay@staffforce.com.au>]

You could try to change the Initialization Strings as ATZ is never
optimal....

You should have got a list of AT Commands and S registers with your modem.

Just a Guess....

Jay

----- Original Message -----
From: Peter J.Pieczora <pjpieczora@sympatico.ca>
To: <hylafax-users@hylafax.org>
Sent: Sunday, August 26, 2001 3:34 PM
Subject: Re: [hylafax-users] hylafax server setup


> I seem to have hylafax server setup with USR V.90 voice. Sending and
> receiving faxes works just fine, but I still have problem with sharing
modem
> device between fax and data connections.
> After /etc/inittab line is uncommented:
>
> # fax getty (hylafax)
> mo:2345:respawn:/usr/sbin/faxgetty /dev/ttyS1
>
> I am not able to use wvdial to get connection to my isp
>
> --> WvDial: Internet dialer version 1.41
> --> Initializing modem.
> --> Sending: ATZ
> --> Sending: ATQ0
> ATH0
> OK
> --> Re-Sending: ATZ
> ATZ
> --> Modem not responding.
>
> Plus also faxgetty gets activated when voice call is being placed.
>
> :MODEM input buffering disabled   <------: end of fax
> :MODEM input buffering enabled   <------:  voice call starts
> : --> [4:RING]
> : MODEM input buffering enabled
> : ANSWER: Ring detected without successful
> handshake
> : <-- [5:ATH0\r]
> : --> [2:OK]
> : MODEM set DTR OFF
> : MODEM set DTR OFF
> : DELAY 2600 ms
> : MODEM set DTR ON
> : MODEM set baud rate: 38400 baud, input
> flow RTS/CTS, output flow RTS/CTS
> : MODEM flush i/o
>
> so basically my answering machine picks up.
>
> Wonder if there is a way to get around it?
>
> Peter
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null