HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] hylafax server setup



I seem to have hylafax server setup with USR V.90 voice. Sending and 
receiving faxes works just fine, but I still have problem with sharing modem 
device between fax and data connections. 
After /etc/inittab line is uncommented: 

# fax getty (hylafax)
mo:2345:respawn:/usr/sbin/faxgetty /dev/ttyS1

I am not able to use wvdial to get connection to my isp

--> WvDial: Internet dialer version 1.41
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATQ0
ATH0
OK
--> Re-Sending: ATZ
ATZ
--> Modem not responding.

Plus also faxgetty gets activated when voice call is being placed.

:MODEM input buffering disabled   <------: end of fax
:MODEM input buffering enabled   <------:  voice call starts
: --> [4:RING]
: MODEM input buffering enabled
: ANSWER: Ring detected without successful 
handshake
: <-- [5:ATH0\r]
: --> [2:OK]
: MODEM set DTR OFF
: MODEM set DTR OFF
: DELAY 2600 ms
: MODEM set DTR ON
: MODEM set baud rate: 38400 baud, input 
flow RTS/CTS, output flow RTS/CTS
: MODEM flush i/o

so basically my answering machine picks up.

Wonder if there is a way to get around it?

Peter


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions