Re: [hylafax-users] USR33.6

[Lee Howard <faxguy@deanox.com>]

At 05:03 PM 6/25/01 +0200, Alberto Raviola wrote:

>Faxes are correctly sent to queue but they expires with the old message:
>
>giu 21 17:59:49.55: [ 1159]: SESSION BEGIN 00000007 39258103485
>giu 21 17:59:49.55: [ 1159]: SEND FAX: JOB 2 DEST 0258103485 COMMID 00000007
>giu 21 17:59:49.55: [ 1159]: DELAY 2600 ms
>giu 21 17:59:52.15: [ 1159]: <-- [4:ATZ\r]
>giu 21 17:59:52.28: [ 1159]: --> [2:OK]
>giu 21 17:59:52.28: [ 1159]: <-- [17:ATE0V1Q0X4S0=0H0\r]
>giu 21 17:59:57.28: [ 1159]: MODEM <Timeout>
>giu 21 17:59:57.28: [ 1159]: SEND FAILED: Can not setup modem
>giu 21 17:59:57.28: [ 1159]: SESSION END

This looks very much like the ATH problem that I mentioned before, and now
that 4.1rc2 is available, you can use that version which has the fix.

>last mail you answered me this way:
>
>"This could be caused by the ATH when the modem is already on hook.  This
>has been fixed in CVS, but I've never seen a USR modem respond this way.
>
>You can test this by changing OnHookCmd to "AT".  THIS IS ONLY FOR TESTING!
> If it doesn't timeout at this point, then you know it's the ATH, and
>you'll need to grab CVS."
>
>Because of my unexperience I didn't understand a lot: I've added the string
>ModemOnHookCmd in my config.ttyS1 but nothing changes, and in any case: what
>do you mean for CVS?

Ignore this and use 4.1rc2.  If you installed via RPM, then ask me to send
you an RPM.

>Note that within MINICOM I've tested all the string found in any
>configuration file, and this without any error.....

The ATH error will not surface in minicom because of the differences in the
way it handles the serial port.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null