[hylafax-users] Session tracing is not working for paging

["Augustyn, Robert non Unisys" <robert.augustyn@unisys.com>]

Hi,
It has been a while since my last installation of Hylafax and I am a bit
rusty so I would appreciate your help.
I am using Hylafax exclusively for alpha numeric paging and after I run the
fax setup and setup of config and config.cua_a
I do not get anything in the fax/log directory?
What do I have to do?
Thanks in advance.
robert

> /usr/local/bin/sendpage -p 3 "test"  
destination pin 3: request id is 7 for host localhost
> mail
From fax Thu Jun  7 17:34 GMT 2001
Date: Thu, 7 Jun 2001 17:34:49 GMT
From: Facsimile Agent <fax>
Message-Id: <200106071734.RAA03032@rv029.ea.unisys.com>
To: arsystem@rv029.ea.unisys.com
Subject: pager job 7 to 0010691 failed
Content-Length: 561

Your pager job to 0010691 could not be completed before the appointed
deadline.

    ---- Unsent job status ----

   Destination: 0010691
         JobID: 7
       GroupID: 7
        Sender: Unisys HelpTRAK
      Mailaddr: arsystem@rv029
Submitted From: localhost
        Status:   (nothing available)
       Dialogs: 0 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 0 (total phone calls placed)

    ---- Unsent pages submitted for transmission ----

    PIN 0010691

    ---- Message text ----

test
config to:
LogFacility:            local0
CountryCode:            1
AreaCode:               415
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          0xffff

config.cua_a
CountryCode:            1
AreaCode:               415
FAXNumber:              +1.999.555.1212
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          0xffff
SessionTracing:         0xffff
RecvFileMode:           0600
LogFileMode:            0666
DeviceMode:             0600
RingsBeforeAnswer:      0
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        HelpTrak
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%p of %%t"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              38400           # lock rate for DCE-DTE
communication
ModemFlowControl:       rtscts          # default
#
ModemHardFlowCmd:       AT&E4           # hardware flow control
ModemSoftFlowCmd:       AT&E5           # software flow control
ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or
not)
ModemSetupAACmd:        AT+FAA=1        # enable adaptive-answer in class 2
PagerSetupCmds:         ATB1N0W2S37=2
PagerMaxMsgLength:      240
#
# NB: some models get confused by the @
#
ModemDialCmd:           ATDT%s@         # T for tone dialing, @ for silence
#
Class2RecvDataTrigger:  "\022"          # character sent to modem to start
recv



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null