HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Detection of Zoom 14.4 Ex



Hi,
I'm trying to get a Zoom 14.4 Ex (external) modem to work with
Hylafax4.1beta3 under NetBSD 1.5 (i386). The output of ATI3 (using cu) is
"AFES - V1510b - Rockwell RPI (TM) MODEM Z201", ATI0 says "14400" (as it
should) and AT+FCLASS=? gives "0,1". When I run the faxaddmodem script it
detects this thing as an RC32ACL, but I think that isn't right. I think it
should be RC144ATi (see following link). I found some docs on
http://www.zoomtel.com/techsprt/docs.shtml with AT commands, so I changed
some of the proposed commands with my the ones from
http://www.zoomtel.com/techsprt/documentation/144aticm.php, but before I
proceed I'd like to know if there isn't a way to let faxaddmodem detect this
thing correctly. Or should I just forget about the detection and use the
rc144-1 config file?

Since this is an RPI modem I should put in "ModemFlowControl: xonxoff",
right? And is "ModemRate: 38400" for this (14.4) modem? I noticed that
there's a "ModemSetupAACmd: AT+FAA=0" in the config, but there isn't such a
command in the documentation mentioned above.

Thanks for any help.

Wouter

- "Don't listen to what you're hearing, listen to what's being said."



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions