Re: [hylafax-users] Detection of Zoom 14.4 Ex

[Lee Howard <faxguy@deanox.com>]

At 12:38 AM 6/6/01 +0200, Wouter Vijvers wrote:
>Hi,
>I'm trying to get a Zoom 14.4 Ex (external) modem to work with
>Hylafax4.1beta3 under NetBSD 1.5 (i386). The output of ATI3 (using cu) is
>"AFES - V1510b - Rockwell RPI (TM) MODEM Z201", ATI0 says "14400" (as it
>should) and AT+FCLASS=? gives "0,1". When I run the faxaddmodem script it
>detects this thing as an RC32ACL, but I think that isn't right. I think it
>should be RC144ATi (see following link). I found some docs on
>http://www.zoomtel.com/techsprt/docs.shtml with AT commands, so I changed
>some of the proposed commands with my the ones from
>http://www.zoomtel.com/techsprt/documentation/144aticm.php, but before I
>proceed I'd like to know if there isn't a way to let faxaddmodem detect this
>thing correctly. Or should I just forget about the detection and use the
>rc144-1 config file?

Does it work with the rc144-1 file?  If so, use it - it's proven itself.

>Since this is an RPI modem I should put in "ModemFlowControl: xonxoff",
>right? And is "ModemRate: 38400" for this (14.4) modem? I noticed that
>there's a "ModemSetupAACmd: AT+FAA=0" in the config, but there isn't such a
>command in the documentation mentioned above.

Use the defaults unless you know what these things mean.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null