[hylafax-users] Cypheus problem

[Marcin Krol <mark@btweng.krakow.pl>]

Hello everyone,

Thanks for help with previous problem, hylafax now works OK. For
Windows client I tried to use Cypheus. I print to "fax" printer
via redmon, Cypheus creates the tiff file, sends it to the
hfaxd on network server fine, the modem dials, connects to
fax and... disconnects. What's weird is that if I take
the fax file created by cypheus and transmit it with sendfax
from the server it transmits fine. This is from logfile
Cypheus leaves in its windows machine directory:


lut 28 11:56:26.22: [ 8549]: SESSION BEGIN 00000012 48122660438
lut 28 11:56:26.22: [ 8549]: SEND FAX: JOB 4 DEST 2660438 COMMID 00000012
lut 28 11:56:26.22: [ 8549]: MODEM set DTR OFF
lut 28 11:56:26.22: [ 8549]: DELAY 2600 ms
lut 28 11:56:28.82: [ 8549]: MODEM set DTR ON
lut 28 11:56:28.82: [ 8549]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS
lut 28 11:56:28.82: [ 8549]: MODEM flush i/o
lut 28 11:56:28.82: [ 8549]: <-- [4:ATZ\r]
lut 28 11:56:29.38: [ 8549]: --> [3:ATZ]
lut 28 11:56:29.38: [ 8549]: --> [2:OK]
lut 28 11:56:29.38: [ 8549]: <-- [15:ATE0V1Q0S0=0H0\r]
lut 28 11:56:29.54: [ 8549]: --> [14:ATE0V1Q0S0=0H0]
lut 28 11:56:29.54: [ 8549]: --> [2:OK]
lut 28 11:56:29.54: [ 8549]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
lut 28 11:56:29.71: [ 8549]: --> [2:OK]
lut 28 11:56:29.71: [ 8549]: <-- [12:AT+FCLASS=2\r]
lut 28 11:56:29.87: [ 8549]: --> [2:OK]
lut 28 11:56:29.87: [ 8549]: <-- [10:AT+FTBC=0\r]
lut 28 11:56:30.03: [ 8549]: --> [2:OK]
lut 28 11:56:30.03: [ 8549]: <-- [10:AT+FBOR=0\r]
lut 28 11:56:30.19: [ 8549]: --> [2:OK]
lut 28 11:56:30.19: [ 8549]: <-- [13:AT+FPHCTO=30\r]
lut 28 11:56:30.35: [ 8549]: --> [2:OK]
lut 28 11:56:30.35: [ 8549]: <-- [10:AT+FBUG=1\r]
lut 28 11:56:30.51: [ 8549]: --> [2:OK]
lut 28 11:56:30.51: [ 8549]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
lut 28 11:56:30.68: [ 8549]: --> [2:OK]
lut 28 11:56:30.68: [ 8549]: <-- [7:ATL2M1\r]
lut 28 11:56:30.84: [ 8549]: --> [2:OK]
lut 28 11:56:30.84: [ 8549]: STATE CHANGE: RUNNING -> SENDING
lut 28 11:56:30.84: [ 8549]: MODEM input buffering enabled
lut 28 11:56:30.84: [ 8549]: Apply DialString rules to "2660438"
lut 28 11:56:30.84: [ 8549]: --> return result "2660438"
lut 28 11:56:30.84: [ 8549]: <-- [12:AT+FCLASS=2\r]
lut 28 11:56:31.10: [ 8549]: --> [2:OK]
lut 28 11:56:31.10: [ 8549]: <-- [10:AT+FTBC=0\r]
lut 28 11:56:31.36: [ 8549]: --> [2:OK]
lut 28 11:56:31.36: [ 8549]: <-- [10:AT+FBOR=0\r]
lut 28 11:56:31.62: [ 8549]: --> [2:OK]
lut 28 11:56:31.62: [ 8549]: <-- [13:AT+FPHCTO=30\r]
lut 28 11:56:31.88: [ 8549]: --> [2:OK]
lut 28 11:56:31.88: [ 8549]: <-- [10:AT+FBUG=1\r]
lut 28 11:56:32.15: [ 8549]: --> [2:OK]
lut 28 11:56:32.15: [ 8549]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
lut 28 11:56:32.42: [ 8549]: --> [2:OK]
lut 28 11:56:32.42: [ 8549]: <-- [14:AT+FLID="BTW"\r]
lut 28 11:56:32.68: [ 8549]: --> [2:OK]
lut 28 11:56:32.68: [ 8549]: DIAL 2660438
lut 28 11:56:32.68: [ 8549]: <-- [13:ATDT2660438@\r]
lut 28 11:57:16.36: [ 8549]: --> [5:+FCON]
lut 28 11:57:18.51: [ 8549]: --> [26:+FHR:FF 13 80 00 4E B8 00 ]
lut 28 11:57:18.51: [ 8549]: --> [57:+FNSF:00 00 0E 00 00 00 16 0F 01 02 00 10 05 02 85 C8 08 ]
lut 28 11:57:18.51: [ 8549]: REMOTE NSF "00 00 0E 00 00 00 16 0F 01 02 00 10 05 02 85 C8 08"
lut 28 11:57:18.51: [ 8549]: NSF remote fax equipment: Panasonic 
lut 28 11:57:18.51: [ 8549]: --> [21:+FDIS:1,3,0,2,0,0,0,4]
lut 28 11:57:18.51: [ 8549]: --> [2:OK]
lut 28 11:57:18.51: [ 8549]: REMOTE best rate 9600 bit/s
lut 28 11:57:18.51: [ 8549]: REMOTE max page width 1728 pixels in 215 mm
lut 28 11:57:18.51: [ 8549]: REMOTE max unlimited page length 
lut 28 11:57:18.51: [ 8549]: REMOTE best vres 7.7 line/mm
lut 28 11:57:18.51: [ 8549]: REMOTE best format 1-D MR
lut 28 11:57:18.51: [ 8549]: REMOTE best 20 ms, 10 ms/scanline
lut 28 11:57:18.51: [ 8549]: USE 9600 bit/s
lut 28 11:57:18.51: [ 8549]: USE 20 ms, 10 ms/scanline
lut 28 11:57:18.51: [ 8549]: <-- [5:ATH0\r]
lut 28 11:57:19.61: [ 8549]: --> [14:+FHT:FF 13 FB ]
lut 28 11:57:20.08: [ 8549]: --> [7:+FHNG:2]
lut 28 11:57:20.08: [ 8549]: REMOTE HANGUP: Call aborted,  from +FK or <CAN> (code 2)
lut 28 11:57:20.73: [ 8549]: --> [2:OK]
lut 28 11:57:20.73: [ 8549]: MODEM set DTR OFF
lut 28 11:57:20.73: [ 8549]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
lut 28 11:57:20.73: [ 8549]: SESSION END



Remote fax aborts ONLY if I send fax via Cypheus. Below there's a log
from transmitting the same file with sendfax command.


lut 28 12:18:12.53: [ 8707]: SESSION BEGIN 00000014 48122660438
lut 28 12:18:12.53: [ 8707]: SEND FAX: JOB 6 DEST 2660438 COMMID 00000014
lut 28 12:18:12.53: [ 8707]: MODEM set DTR OFF
lut 28 12:18:12.53: [ 8707]: DELAY 2600 ms
lut 28 12:18:15.13: [ 8707]: MODEM set DTR ON
lut 28 12:18:15.13: [ 8707]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS
lut 28 12:18:15.13: [ 8707]: MODEM flush i/o
lut 28 12:18:15.13: [ 8707]: <-- [4:ATZ\r]
lut 28 12:18:15.69: [ 8707]: --> [3:ATZ]
lut 28 12:18:15.69: [ 8707]: --> [2:OK]
lut 28 12:18:15.69: [ 8707]: <-- [15:ATE0V1Q0S0=0H0\r]
lut 28 12:18:15.85: [ 8707]: --> [14:ATE0V1Q0S0=0H0]
lut 28 12:18:15.85: [ 8707]: --> [2:OK]
lut 28 12:18:15.85: [ 8707]: <-- [21:ATS8=2S7=60&E4&D3&C1\r]
lut 28 12:18:16.02: [ 8707]: --> [2:OK]
lut 28 12:18:16.02: [ 8707]: <-- [12:AT+FCLASS=2\r]
lut 28 12:18:16.18: [ 8707]: --> [2:OK]
lut 28 12:18:16.18: [ 8707]: <-- [10:AT+FTBC=0\r]
lut 28 12:18:16.34: [ 8707]: --> [2:OK]
lut 28 12:18:16.34: [ 8707]: <-- [10:AT+FBOR=0\r]
lut 28 12:18:16.50: [ 8707]: --> [2:OK]
lut 28 12:18:16.50: [ 8707]: <-- [13:AT+FPHCTO=30\r]
lut 28 12:18:16.66: [ 8707]: --> [2:OK]
lut 28 12:18:16.66: [ 8707]: <-- [10:AT+FBUG=1\r]
lut 28 12:18:16.82: [ 8707]: --> [2:OK]
lut 28 12:18:16.82: [ 8707]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
lut 28 12:18:16.99: [ 8707]: --> [2:OK]
lut 28 12:18:16.99: [ 8707]: <-- [7:ATL2M1\r]
lut 28 12:18:17.15: [ 8707]: --> [2:OK]
lut 28 12:18:17.15: [ 8707]: STATE CHANGE: RUNNING -> SENDING
lut 28 12:18:17.15: [ 8707]: MODEM input buffering enabled
lut 28 12:18:17.15: [ 8707]: Apply DialString rules to "2660438"
lut 28 12:18:17.15: [ 8707]: --> return result "2660438"
lut 28 12:18:17.15: [ 8707]: <-- [12:AT+FCLASS=2\r]
lut 28 12:18:17.41: [ 8707]: --> [2:OK]
lut 28 12:18:17.41: [ 8707]: <-- [10:AT+FTBC=0\r]
lut 28 12:18:17.67: [ 8707]: --> [2:OK]
lut 28 12:18:17.67: [ 8707]: <-- [10:AT+FBOR=0\r]
lut 28 12:18:17.93: [ 8707]: --> [2:OK]
lut 28 12:18:17.93: [ 8707]: <-- [13:AT+FPHCTO=30\r]
lut 28 12:18:18.19: [ 8707]: --> [2:OK]
lut 28 12:18:18.19: [ 8707]: <-- [10:AT+FBUG=1\r]
lut 28 12:18:18.45: [ 8707]: --> [2:OK]
lut 28 12:18:18.45: [ 8707]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
lut 28 12:18:18.72: [ 8707]: --> [2:OK]
lut 28 12:18:18.72: [ 8707]: <-- [14:AT+FLID="BTW"\r]
lut 28 12:18:18.98: [ 8707]: --> [2:OK]
lut 28 12:18:18.98: [ 8707]: DIAL 2660438
lut 28 12:18:18.98: [ 8707]: <-- [13:ATDT2660438@\r]
lut 28 12:18:57.75: [ 8707]: --> [5:+FCON]
lut 28 12:18:59.88: [ 8707]: --> [26:+FHR:FF 13 80 00 4E B8 00 ]
lut 28 12:18:59.88: [ 8707]: --> [57:+FNSF:00 00 0E 00 00 00 16 0F 01 02 00 10 05 02 85 C8 08 ]
lut 28 12:18:59.88: [ 8707]: REMOTE NSF "00 00 0E 00 00 00 16 0F 01 02 00 10 05 02 85 C8 08"
lut 28 12:18:59.88: [ 8707]: NSF remote fax equipment: Panasonic 
lut 28 12:18:59.88: [ 8707]: --> [21:+FDIS:1,3,0,2,0,0,0,4]
lut 28 12:18:59.88: [ 8707]: --> [2:OK]
lut 28 12:18:59.88: [ 8707]: REMOTE best rate 9600 bit/s
lut 28 12:18:59.88: [ 8707]: REMOTE max page width 1728 pixels in 215 mm
lut 28 12:18:59.88: [ 8707]: REMOTE max unlimited page length 
lut 28 12:18:59.88: [ 8707]: REMOTE best vres 7.7 line/mm
lut 28 12:18:59.88: [ 8707]: REMOTE best format 1-D MR
lut 28 12:18:59.88: [ 8707]: REMOTE best 20 ms, 10 ms/scanline
lut 28 12:18:59.88: [ 8707]: USE 9600 bit/s
lut 28 12:18:59.88: [ 8707]: USE 20 ms, 10 ms/scanline
lut 28 12:18:59.88: [ 8707]: SEND file "docq/doc7.tif;01"
lut 28 12:18:59.88: [ 8707]: USE page width 1728 pixels in 215 mm
lut 28 12:18:59.88: [ 8707]: USE unlimited page length 
lut 28 12:18:59.88: [ 8707]: USE 7.7 line/mm
lut 28 12:18:59.88: [ 8707]: USE 1-D MR
lut 28 12:18:59.88: [ 8707]: <-- [24:AT+FDIS=1,3,0,2,0,0,0,4\r]
lut 28 12:19:00.15: [ 8707]: --> [2:OK]
lut 28 12:19:00.15: [ 8707]: <-- [7:AT+FDT\r]
lut 28 12:19:01.28: [ 8707]: --> [74:+FHT:FF 03 43 57 54 42 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 ]
lut 28 12:19:02.08: [ 8707]: --> [26:+FHT:FF 13 83 00 46 A8 00 ]
lut 28 12:19:07.03: [ 8707]: --> [14:+FHR:FF 13 84 ]
lut 28 12:19:07.03: [ 8707]: --> [21:+FDCS:1,3,0,2,0,0,0,3]
lut 28 12:19:07.03: [ 8707]: --> [7:CONNECT]
lut 28 12:19:07.03: [ 8707]: SEND wait for XON
lut 28 12:19:07.03: [ 8707]: --> [1:]
lut 28 12:19:07.03: [ 8707]: SEND begin page
lut 28 12:19:07.03: [ 8707]: <-- data [1030]
lut 28 12:19:07.03: [ 8707]: <-- data [1025]
lut 28 12:19:07.03: [ 8707]: <-- data [1027]
lut 28 12:19:07.03: [ 8707]: <-- data [1027]
lut 28 12:19:07.03: [ 8707]: <-- data [1029]
lut 28 12:19:08.03: [ 8707]: <-- data [1025]
lut 28 12:19:08.03: [ 8707]: <-- data [1024]
lut 28 12:19:08.03: [ 8707]: <-- data [1026]
lut 28 12:19:09.91: [ 8707]: <-- data [1026]
lut 28 12:19:10.99: [ 8707]: <-- data [1033]
lut 28 12:19:12.58: [ 8707]: <-- data [1025]
lut 28 12:19:15.24: [ 8707]: <-- data [1026]
lut 28 12:19:15.99: [ 8707]: <-- data [1024]
lut 28 12:19:16.87: [ 8707]: <-- data [1024]
lut 28 12:19:17.64: [ 8707]: <-- data [1026]
lut 28 12:19:18.53: [ 8707]: <-- data [1026]
lut 28 12:19:19.33: [ 8707]: <-- data [1028]
lut 28 12:19:21.49: [ 8707]: <-- data [1026]
lut 28 12:19:22.26: [ 8707]: <-- data [1030]
lut 28 12:19:23.01: [ 8707]: <-- data [1026]
lut 28 12:19:25.22: [ 8707]: <-- data [1031]
lut 28 12:19:25.99: [ 8707]: <-- data [1025]
lut 28 12:19:26.96: [ 8707]: <-- data [1027]
lut 28 12:19:27.84: [ 8707]: <-- data [1027]
lut 28 12:19:29.70: [ 8707]: <-- data [1024]
lut 28 12:19:30.53: [ 8707]: <-- data [1030]
lut 28 12:19:31.42: [ 8707]: <-- data [1026]
lut 28 12:19:32.68: [ 8707]: <-- data [1024]
lut 28 12:19:33.99: [ 8707]: <-- data [1024]
lut 28 12:19:34.82: [ 8707]: <-- data [1024]
lut 28 12:19:36.14: [ 8707]: <-- data [1030]
lut 28 12:19:37.90: [ 8707]: <-- data [1026]
lut 28 12:19:38.63: [ 8707]: <-- data [1024]
lut 28 12:19:40.01: [ 8707]: <-- data [1033]
lut 28 12:19:41.73: [ 8707]: <-- data [1031]
lut 28 12:19:42.45: [ 8707]: <-- data [1026]
lut 28 12:19:43.69: [ 8707]: <-- data [1028]
lut 28 12:19:45.94: [ 8707]: <-- data [1030]
lut 28 12:19:46.81: [ 8707]: <-- data [1024]
lut 28 12:19:47.71: [ 8707]: <-- data [1024]
lut 28 12:19:48.79: [ 8707]: <-- data [1026]
lut 28 12:19:50.22: [ 8707]: <-- data [1024]
lut 28 12:19:51.03: [ 8707]: <-- data [1028]
lut 28 12:19:52.86: [ 8707]: <-- data [1026]
lut 28 12:19:53.66: [ 8707]: <-- data [1024]
lut 28 12:19:54.53: [ 8707]: <-- data [1030]
lut 28 12:19:55.27: [ 8707]: <-- data [1030]
lut 28 12:19:57.22: [ 8707]: <-- data [1028]
lut 28 12:19:58.04: [ 8707]: <-- data [1026]
lut 28 12:19:58.85: [ 8707]: <-- data [1024]
lut 28 12:20:00.06: [ 8707]: <-- data [552]
lut 28 12:20:00.79: [ 8707]: SENT 51752 bytes of data
lut 28 12:20:00.79: [ 8707]: <-- data [2]
lut 28 12:20:00.79: [ 8707]: SEND end page
lut 28 12:20:06.90: [ 8707]: --> [112:]
lut 28 12:20:06.90: [ 8707]: --> [2:OK]
lut 28 12:20:06.90: [ 8707]: SEND send EOP (no more pages or documents)
lut 28 12:20:06.90: [ 8707]: <-- [9:AT+FET=2\r]
lut 28 12:20:11.35: [ 8707]: --> [14:+FHT:FF 13 2F ]
lut 28 12:20:13.45: [ 8707]: --> [14:+FHR:FF 13 8C ]
lut 28 12:20:13.45: [ 8707]: --> [7:+FPTS:1]
lut 28 12:20:14.45: [ 8707]: --> [14:+FHT:FF 13 FB ]
lut 28 12:20:14.92: [ 8707]: --> [7:+FHNG:0]
lut 28 12:20:14.92: [ 8707]: REMOTE HANGUP: Normal and proper end of connection (code 0)
lut 28 12:20:14.92: [ 8707]: SEND recv MCF (message confirmation)
lut 28 12:20:14.92: [ 8707]: SEND FAX (00000014): FROM root@inet.btweng.krakow.pl TO 2660438 (page 1 of 1 sent in 1:15)
lut 28 12:20:14.92: [ 8707]: SEND FAX (00000014): FROM root@inet.btweng.krakow.pl TO 2660438 (docq/doc7.tif;01 sent in 1:15)
lut 28 12:20:14.92: [ 8707]: <-- [5:ATH0\r]
lut 28 12:20:15.56: [ 8707]: --> [2:OK]
lut 28 12:20:15.56: [ 8707]: MODEM set DTR OFF
lut 28 12:20:15.56: [ 8707]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
lut 28 12:20:15.56: [ 8707]: SESSION END




Regards,

Marcin Krol

...Put knot yore trust inn spel chequers




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null