Re: [hylafax-users] Problem with Zyxel Omni 56K

[Lee Howard <faxguy@deanox.com>]

At 10:03 AM 2/22/01 +0100, Dennis Leeuw wrote:
>Hi all,
>
>I am having troubles with a Zyxel Omni 56K modem and hylafax.
>
>The Setup:
>Zyxel Omni 56K
>Version 1.05
>
>Hylafax 4.1beta2
>
>SuSE Linux 6.3
>
>The Problem:
>When a fax is submitted by sendfax using -n -D -d <num> options, hylafax
>tries to send the fax. It dials the remote fax, which picks up the line,
>one of the two (Zyxel or the remote fax, can't check. I am near the
>remote fax, and hylafax is installed on a machine far away from me)
>starts the negotiating sequence (the beeps), but hylafax keeps
>responding: SEND FAILED: No answer from remote.

I had a similar symptom recently: 
http://www.hylafax.org/archive/2001-02/msg00172.php

Although our circumstances are quite a bit different.  I'm using CVS
HylaFAX on RedHat 6.1 in this case, and I could only get a USR modem to
acknowledge the remote answer.

>I tried playing around with S7, and switching back from Class 2.0 to
>Class 1.
>
>I think it is not a hylafax problem, but a modem or line problem. Since
>I don't know where to look I hoped someone on this list might have an
>idea.

Well, I didn't think mine was a HylaFAX problem until I found that faxing
on a USR modem *does* work for this instance.

If you pass me your number privately, I'd be happy to send you a test fax
from here, which should tell us if it's your configuration, and I could try
with a USR modem, too, if it fails at first.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null