[hylafax-users] faxmail/sendmail question

[Michael Engelhart <mengelhart@earthtrip.com>]

Hi,

I just installed Hylafax 4.1beta2 on a LinuxPPC box and have sendmail 8.9.3 running.  I used the information on the hylafax site to tweak my sendmail.mc an ran m4 on it to create a new sendmail.cf.   Hylafax works great  when I use sendfax but when I try the email gateway with something like this:

mail mike.engelhart@19087664216.fax

Hylafax starts processing it but as you'll see in the log below, somehow the phone number is coming back as "78" as in the ATDT78 line.   This happens with any fax number used when i pass it through sendmail.

Any ideas on where I went wrong in my configuration?  My understanding of sendmail conf files is pretty much nil...

Thanks for any pointers.

Mike

***** LOG ****

Feb 21 11:38:08.45: [16909]: SESSION BEGIN 00000010 151278
Feb 21 11:38:08.45: [16909]: SEND FAX: JOB V£¿V£¿V£»V£»äùpäú–V£ÿV£ÿV£‡V£‡äù»äù»V£V£V£¯V£¯V§ DEST (null) COMMID V£¿V£¿V
£»V£»äùpäú–V£ÿV£ÿV£‡V£‡äù»äù»V£V£V£¯V£¯V§
Feb 21 11:38:08.45: [16909]: DELAY 2600 ms
Feb 21 11:38:11.05: [16909]: <-- [15:ATE0V1Q0S0=0H0\r]
Feb 21 11:38:11.19: [16909]: --> [2:OK]
Feb 21 11:38:11.19: [16909]: <-- [21:ATS8=2S7=60&K4&D3&C1\r]
Feb 21 11:38:11.21: [16909]: --> [2:OK]
Feb 21 11:38:11.21: [16909]: <-- [12:AT+FCLASS=1\r]
Feb 21 11:38:11.22: [16909]: --> [2:OK]
Feb 21 11:38:11.22: [16909]: <-- [9:AT+FAA=0\r]
Feb 21 11:38:11.23: [16909]: --> [2:OK]
Feb 21 11:38:11.23: [16909]: <-- [5:ATM0\r]
Feb 21 11:38:11.24: [16909]: --> [2:OK]
Feb 21 11:38:11.24: [16909]: <-- [12:AT+FCLASS=1\r]
Feb 21 11:38:11.36: [16909]: --> [2:OK]
Feb 21 11:38:11.36: [16909]: DIAL 78
Feb 21 11:38:11.36: [16909]: <-- [7:ATDT78\r]
Feb 21 11:39:23.13: [16909]: --> [10:NO CARRIER]
Feb 21 11:39:23.13: [16909]: SEND FAILED: V£∏V£∏V£¿V£¿V£»V£»V£–V£–V£ÿV£ÿV£‡V£‡V£ËV£ËV£V£V£¯V£¯V§
Feb 21 11:39:23.13: [16909]: <-- [5:ATH0\r]
Feb 21 11:39:23.37: [16909]: --> [2:OK]
Feb 21 11:47:54.88: [17005]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null