Re: [hylafax-users] faxrcvd => Fax send per Mime E-Mail

["Abrahamsen, Kenneth" <Kenneth_Abrahamsen@mcgraw-hill.com>]

This works for us:
Please review / modify for YOUR site requirements.
ken

In /var/spool/fax/bin:

[root@twgrh1 bin]# cat faxrcvd
#! /bin/sh
#       $Id: faxrcvd.sh,v 1.1.1.1 1998/10/12 20:47:48 root Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names
of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#

#
# faxrcvd file devID commID error-msg
#
if [ $# != 4 ]; then
    echo "Usage: $0 file devID commID error-msg"
    exit 1
fi

test -f etc/setup.cache || {
    SPOOL=`pwd`
    cat<<EOF

FATAL ERROR: $SPOOL/etc/setup.cache is missing!

The file $SPOOL/etc/setup.cache is not present.  This
probably means the machine has not been setup using the faxsetup(1M)
command.  Read the documentation on setting up HylaFAX before you
startup a server system.

EOF
    exit 1
}
. etc/setup.cache

INFO=$SBIN/faxinfo
FAX2PS=$TIFFBIN/fax2ps
TOADDR=FaxMaster
#
# There is no good portable way to find out the fully qualified
# domain name (FQDN) of the host or the TCP port for the hylafax
# service so we fudge here.  Folks may want to tailor this to
# their needs; e.g. add a domain or use localhost so the loopback
# interface is used.
#
HOSTNAME=`hostname`                     # XXX no good way to find FQDN
PORT=4559                               # XXX no good way to lookup service
#
# Define host's FQDN and Domain Name
. /usr/local/bin/twg_setFQDN

# echo "FQDN: "$FQDN > /tmp/kaa
# echo "DOMAINNAME: "$DOMAINNAME >> /tmp/kaa
# echo "HOSTNAME: "$HOSTNAME >> /tmp/kaa

# If Domain name exists, then append it to HOSTNAME
if [ -n "$DOMAINNAME" ]; then
        HOSTNAME=$HOSTNAME."$DOMAINNAME"
fi

FILE="$1"
DEVICE="$2"
COMMID="$3"
MSG="$4"

# Define Printer to use for printing received faxes (if desired)
FAXPRINTER=twgactg3

if [ -f $FILE ]; then
    #
    # Check the sender's TSI and setup to dispatch
    # facsimile received from well-known senders.
    #
    SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`"
    SENDTO=
    if [ -f etc/FaxDispatch ]; then
        . etc/FaxDispatch       # NB: FaxDispatch sets SENDTO based on
$SENDER
    fi
    (echo "To: $TOADDR"
     echo "From: The HylaFAX Receive Agent <fax>"
     echo "Subject: facsimile received from $SENDER";
     echo ""
#     echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
     # Use SAMBA Share and Kodak Imaging on Client to View Fax Image
     echo "$FILE (file://$HOSTNAME/$FILE):"; $INFO -n $FILE
     echo "ReceivedOn: $DEVICE"
     if [ "$MSG" ]; then
        echo ""
        echo "The full document was not received because:"
        echo ""
        echo "    $MSG"
        echo ""
        echo "    ---- Transcript of session follows ----"
        echo ""
        if [ -f log/c$COMMID ]; then
            $SED -e '/-- data/d' \
                 -e '/start.*timer/d' -e '/stop.*timer/d' \
                 log/c$COMMID
        elif [ -n "$COMMID" ]; then
            echo "    No transcript available (CommID c$COMMID)."
        else
            echo "    No transcript available."
        fi
     else
        echo "CommID:     c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
#       echo "CommID:     c$COMMID (file://$HOSTNAME/log/c$COMMID)"
     fi
     if [ -n "$SENDTO" ]; then
        echo ""
        echo "The facsimile was automatically dispatched to: $SENDTO."
     fi
    ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
    if [ -n "$SENDTO" ]; then
        (MIMEBOUNDARY="NextPart$$"
         echo "Mime-Version: 1.0"
         echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
         echo "Content-Transfer-Encoding: 7bit"
         echo "To: $SENDTO"
         echo "From: The HylaFAX Receive Agent <fax>"
         echo "Subject: facsimile received from $SENDER";
         echo ""
         echo "--$MIMEBOUNDARY"
         echo "Content-Type: text/plain; charset=us-ascii"
         echo "Content-Transfer-Encoding: 7bit"
         echo ""
#        echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
         # Use SAMBA Share and Kodak Imaging on Client to View Fax Image
         echo "$FILE (file://$HOSTNAME/$FILE):"; $INFO -n $FILE
         echo "ReceivedOn: $DEVICE"
         if [ "$MSG" ]; then
            echo ""
            echo "The full document was not received because:"
            echo ""
            echo "    $MSG"
            echo ""
            echo "    ---- Transcript of session follows ----"
            echo ""
            if [ -f log/c$COMMID ]; then
                $SED -e '/-- data/d' \
                     -e '/start.*timer/d' -e '/stop.*timer/d' \
                     log/c$COMMID
            elif [ -n "$COMMID" ]; then
                echo "    No transcript available (CommID c$COMMID)."
            else
                echo "    No transcript available."
            fi
         else
            echo "CommID:     c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
#           echo "CommID:     c$COMMID (file://$HOSTNAME/log/c$COMMID)"
         fi
         echo ""
         echo "--$MIMEBOUNDARY"
         echo "Content-Type: application/postscript"
         echo "Content-Description: FAX document"
         echo "Content-Transfer-Encoding: 7bit"
         echo ""
         $FAX2PS $FILE 2>/dev/null
         echo ""
         echo "--$MIMEBOUNDARY--"
        ) | 2>&1 $SENDMAIL -ffax -oi $SENDTO
    else
        #
        # No Known Email Delivery Address - Send Fax to Desired Printer
        #
#       $FAX2PS -H 10.5 -S $FILE | lpr -P $FAXPRINTER -v
#       $FAX2PS -H 10.5 -S $FILE | lpr -P $FAXPRINTER
#       $FAX2PS $FILE | lpr -P $FAXPRINTER
#       $TIFFBIN/tiff2ps -a $FILE | lpr -P $FAXPRINTER
        $FAX2PS -H 10.15 -S $FILE | lpr -P $FAXPRINTER
    fi
else
    #
    # Generate notification mail for a failed attempt.
    #
    (echo "To: $TOADDR"
     echo "From: The HylaFAX Receive Agent <fax>"
     echo "Subject: facsimile not received"
     echo ""
     echo "An attempt to receive facsimile on $DEVICE failed because:"
     echo ""
     echo "    $MSG"
     echo ""
     echo "    ---- Transcript of session follows ----"
     echo ""
     if [ -f log/c$COMMID ]; then
        $SED -e '/-- data/d' \
             -e '/start.*timer/d' -e '/stop.*timer/d' \
            log/c$COMMID
     elif [ -n "$COMMID" ]; then
        echo "    No transcript available (CommID c$COMMID)."
     else
        echo "    No transcript available."
     fi
    ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
fi

-----Original Message-----
From: Thomas Reiß [mailto:Thomas.Reiss@TheresienKH-Nbg.de]
Sent: Monday, January 22, 2001 9:21 AM
To: hylafax-users@hylafax.org
Subject: [hylafax-users] faxrcvd => Fax send per Mime E-Mail


Hello,

I try to send incoming Fax as an mime-codet tif File per E-Mail.
So i changed bin/faxrcvd to:

--cut
         echo ""
         echo "--$MIMEBOUNDARY"
         echo ""
         echo "Content-Type: application/octet-stream; name=Fax.tif"
         echo "Content-Transfer-Encoding: base64"
         echo "Content-Disposition: attachment; name=fax.tif"
         echo""
        $FAX2PS $FAX Fax.tif 2>/dev/nul
         echo ""
         echo "--$MIMEBOUNDARY--"

--cut

where 
FAX2PS="/usr/bin/uuencode -m"

But i dosn't work.
Can anybody tell my why ? (Im a beginner to understand the mime encoding !)

Thanks
Thomas




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null