[hylafax-users] AW: AVM B1 ISA

["Bernd Proissl" <lists@proissl.de>]

Do you speek/write german?
I can dig out the address of a german mailing list for the B1 under Linux.
Should i translate/forward your mail?
You should also find readmes somewhere on ftp.avm.de or www.avm.de
(in english and german)
unfortunately i am not yet familiar with the B1 under Linux/hylafax.

Bernd


> -----Ursprüngliche Nachricht-----
> Von: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]Im Auftrag von Claas Hilbrecht
> Gesendet am: Mittwoch, 17. Januar 2001 18:18
> An: hylafax-users@hylafax.org
> Betreff: [hylafax-users] AVM B1 ISA
>
> Is anyone successfully using an AVM B1 ISA card with hylafax? I've done
> the basic setup and receiving works fine but I have much trouble with
> sending a fax. I've used capi4hylafax-01.01.01.tar.gz for the seup. The
> problems are:
>
> 1) Hylafax will always try to start /usr/lib/fax/faxsend instead of
> /usr/local/bin/c2faxsend as the config parameter SendFaxCmd: says. Why?
>
> 2) After changing /usr/lib/fax/faxsend to be a link to
> /usr/local/bin/c2faxsend hylafax starts using c2faxsend but it will
> complain about a missing fax file. After trying a lot I found that the
> qfile will list all postscript files in the format:
>
> postscript:0::docq/filename.ps
>
> but c2faxsend will only accept
>
> fax:0::docq/filename.tif
>
> where the file really needs to be a tiff file. Shouldn't c2faxsend a
> drop-in replacement?
>
> What is wrong in my configuration?
>
>
> Mit freundlichem Gruss
> Claas Hilbrecht
>
> Linum Software GmbH
> http://www.linum.com
> Tel: 05561-9267-30
> Fax: 05561-9267-50
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null