[hylafax-users] Zyxel 2864 Ring detected without successful handshake

[Kullmann Werner <werner.kullmann@national.ch>]

We found the problem - maybe the solution is helpful for other setups:
the modem was connected to a Siemens HICOM 300 system. The init-string sets
to Connection-Speed to 'highest possible' with AT&N0. 

When we changed the String to AT&N32, making it a FAX-only-modem, the
problem did not occur any more. The modem can now be used with the latest
firmware V3.02

regards

Werner Kullmann
National Versicherung, Systembetreuung
Tel. ++41 (0)61 275 25 82 -Fax ++41(0)61 275 25 88
mailto:werner.kullmann@national.ch / http://www.national.ch





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null