Re: [hylafax-users] EOP Error

[jehan.procaccia@int-evry.fr]

Sven Johannsen wrote:
> 
> Hi everybody,
> 
> I still got this problem that the first page of a fax will be send three
> times. After the receiving Fax printed the Page three times it announces
> an error.
> 
> > >Nov 23 14:00:55.96: [11454]: SEND begin page
> > >Nov 23 14:01:07.28: [11454]: SENT 14683 bytes of data
> > >Nov 23 14:01:07.28: [11454]: SEND 1D RTC
> > >Nov 23 14:01:07.28: [11454]: SEND end page
> > >Nov 23 14:01:07.28: [11454]: SEND send EOP (no more pages or
> documents)
> > >Nov 23 14:01:17.48: [11454]: --> [5:ERROR]
> > >Nov 23 14:01:17.48: [11454]: SEND recv RTN (retrain negative)
> > >Nov 23 14:01:17.48: [11454]: <-- [23:AT+FIS=0,2,0,2,0,0,0,2\r]
> > >Nov 23 14:01:17.60: [11454]: --> [2:OK]
> >
> > >What can I do? Any ideas?
> >
> > Switch to Class 1.
> >
> > Lee.
> I've tried to switch to class 1, but I don't know which class1 commands
> my modem (Zyxel U-1496 EG Plus) supports. Faxaddmodem only detects a
> class 2 or a class 2.0 modem, so I think it doesn't work with class 1
> parameters.
> 
> Sven

I had a similar problem resulting in the famous "SEND recv RTN (retrain
negative)", I resolved it by forcing the data format to 1-D MR (Modified
Huffman) with the following command in config.ttyS0
#(vr),(br),(wd),(ln),(df),(ec),(bf),(st)
Class2DCCQueryCmd:     "!(0,1),(0-5),(0-2),(0-2),(0),(0),(0),(2-7)"
the 5th brackets (0) corresponds to df: data format 0 = 1-D

and even tied to lower baud rate:

ModemRate:              9600
-- 
Jehan Procaccia
Institut National des Telecommunications| Email :
Jehan.Procaccia@int-evry.fr 
9 rue Charles Fourier			| Tel   : +33 (0) 160764436 
91011 Evry   France			| Fax   : +33 (0) 160764321


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null