[hylafax-users] Problem with Unspecified Transmit Phase B error

["kochs" <kochs@traveltainment.de>]

hello ,

My log-file :

Nov 30 15:09:20.26: [26761]: SESSION BEGIN 00000028 2405448490
Nov 30 15:09:20.26: [26761]: SEND FAX: JOB 27 DEST 002405448490 COMMID
00000028
Nov 30 15:09:20.26: [26761]: MODEM set DTR OFF
Nov 30 15:09:20.27: [26761]: DELAY 2600 ms
Nov 30 15:09:22.87: [26761]: MODEM set DTR ON
Nov 30 15:09:22.87: [26761]: MODEM set baud rate: 19200 baud, input flow
RTS/CTS, output flow RTS/CTS
Nov 30 15:09:22.87: [26761]: MODEM flush i/o
Nov 30 15:09:22.87: [26761]: <-- [15:ATE0V1Q0S0=0H0\r]
Nov 30 15:09:23.02: [26761]: --> [2:OK]
Nov 30 15:09:23.02: [26761]: <-- [21:ATS8=2S7=60&K3&D2&C1\r]
Nov 30 15:09:23.17: [26761]: --> [2:OK]
Nov 30 15:09:23.17: [26761]: <-- [12:AT+FCLASS=2\r]
Nov 30 15:09:23.32: [26761]: --> [2:OK]
Nov 30 15:09:23.32: [26761]: <-- [10:AT+FTBC=0\r]
Nov 30 15:09:23.47: [26761]: --> [2:OK]
Nov 30 15:09:23.47: [26761]: <-- [10:AT+FBOR=0\r]
Nov 30 15:09:23.62: [26761]: --> [2:OK]
Nov 30 15:09:23.62: [26761]: <-- [13:AT+FPHCTO=30\r]
Nov 30 15:09:23.77: [26761]: --> [2:OK]
Nov 30 15:09:23.77: [26761]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Nov 30 15:09:23.92: [26761]: --> [2:OK]
Nov 30 15:09:23.92: [26761]: <-- [5:ATM0\r]
Nov 30 15:09:24.06: [26761]: --> [2:OK]
Nov 30 15:09:24.06: [26761]: MODEM input buffering enabled
Nov 30 15:09:24.06: [26761]: <-- [12:AT+FCLASS=2\r]
Nov 30 15:09:24.31: [26761]: --> [2:OK]
Nov 30 15:09:24.31: [26761]: <-- [10:AT+FTBC=0\r]
Nov 30 15:09:24.56: [26761]: --> [2:OK]
Nov 30 15:09:24.56: [26761]: <-- [10:AT+FBOR=0\r]
Nov 30 15:09:24.81: [26761]: --> [2:OK]
Nov 30 15:09:24.81: [26761]: <-- [13:AT+FPHCTO=30\r]
Nov 30 15:09:25.06: [26761]: --> [2:OK]
Nov 30 15:09:25.06: [26761]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Nov 30 15:09:25.31: [26761]: --> [2:OK]
Nov 30 15:09:25.31: [26761]: <-- [26:AT+FLID="Fax-disp-dialog"\r]
Nov 30 15:09:25.57: [26761]: --> [2:OK]
Nov 30 15:09:25.57: [26761]: DIAL 002405448490
Nov 30 15:09:25.57: [26761]: <-- [17:ATDT002405448490\r]
Nov 30 15:09:45.64: [26761]: --> [5:+FCON]
Nov 30 15:09:48.49: [26761]: --> [29:+FCSI: "     +49 2405 448490"]
Nov 30 15:09:48.49: [26761]: REMOTE CSI "+49 2405 448490"
Nov 30 15:09:48.78: [26761]: --> [22:+FDIS: 1,5,0,2,1,0,0,3]
Nov 30 15:09:48.89: [26761]: --> [2:OK]
Nov 30 15:09:48.89: [26761]: REMOTE best rate 14400 bit/s
Nov 30 15:09:48.89: [26761]: REMOTE max page width 1728 pixels in 215 mm
Nov 30 15:09:48.89: [26761]: REMOTE max unlimited page length
Nov 30 15:09:48.89: [26761]: REMOTE best vres 7.7 line/mm
Nov 30 15:09:48.89: [26761]: REMOTE best format 2-D MR
Nov 30 15:09:48.89: [26761]: REMOTE best 10 ms/scanline
Nov 30 15:09:48.89: [26761]: USE 14400 bit/s
Nov 30 15:09:48.89: [26761]: USE 10 ms/scanline
Nov 30 15:09:48.89: [26761]: <-- [5:ATH0\r]
Nov 30 15:09:49.14: [26761]: --> [9:+FHNG: 20]
Nov 30 15:09:49.14: [26761]: REMOTE HANGUP: Unspecified Transmit Phase B
error (code 20)
Nov 30 15:09:49.71: [26761]: --> [2:OK]
Nov 30 15:09:49.71: [26761]: MODEM set DTR OFF
Nov 30 15:09:49.71: [26761]: SESSION END

Thanks for help

Dieter Kochs



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null