[hylafax-users] ModemResetCmds: "ATZ\n"

[Giulio Orsero <giulioo@pobox.com>]

On 25 Sep 2000 17:22:28 +0300, you wrote:

>> Sep 24 18:53:58 donsoft FaxGetty[715]: MODEM flush i/o
>> Sep 24 18:53:58 donsoft FaxGetty[715]: <-- [16:ATZE0V1Q0S0=0H0\r]
>> Sep 24 18:53:58 donsoft FaxGetty[715]: --> [15:ATZE0V1Q0S0=0H0]
>> Sep 24 18:53:58 donsoft FaxGetty[715]: --> [2:OK]
>> Sep 24 18:53:58 donsoft FaxGetty[715]: <-- [21:ATS8=2S7=50&K3&D2&C1\r]
>> Sep 24 18:53:58 donsoft FaxGetty[715]: --> [20:ATS8=2S7=50&K3&D2&C1]
>> Sep 24 18:53:58 donsoft FaxGetty[715]: --> [2:OK]
>
>It seems to ignore all commands after ATZ (such behavior is allowed) and so
>does not disable the command echo. Try
>ModemResetCmds: "ATZ\n"


I'm not the one with the problem discussed in a the 
"help to initialize multitech 56k modem" thread.

However, I tried adding 
ModemResetCmds: "ATZ\n"
or
ModemResetCmds: "ATZ\r"

but I get errors.

4.1beta2 RedHatLinux61

With
ModemResetCmds: ""

ep 25 16:44:52 i3 FaxGetty[24993]: MODEM flush i/o
Sep 25 16:44:52 i3 FaxGetty[24993]: <-- [26:ATE0V1Q0X3S0=0+FCLASS=0H0\r]
Sep 25 16:44:52 i3 FaxGetty[24993]: --> [25:ATE0V1Q0X3S0=0+FCLASS=0H0]
Sep 25 16:44:52 i3 FaxGetty[24993]: --> [2:OK]
Sep 25 16:44:52 i3 FaxGetty[24993]: <-- [21:ATS8=2S7=60&K4&D3&C1\r]
Sep 25 16:44:52 i3 FaxGetty[24993]: --> [2:OK]
Sep 25 16:44:52 i3 FaxGetty[24993]: <-- [12:AT+FCLASS=?\r]
Sep 25 16:44:52 i3 FaxGetty[24993]: --> [7:0,1,1.0]
Sep 25 16:44:52 i3 FaxGetty[24993]: --> [2:OK]
Sep 25 16:44:52 i3 FaxGetty[24993]: MODEM Supports "Data"
...

With
ModemResetCmds: "ATZ\r"  

Sep 25 16:43:55 i3 FaxGetty[24931]: MODEM flush i/o
Sep 25 16:43:55 i3 FaxGetty[24931]: <-- [4:ATZ\r]
Sep 25 16:43:55 i3 FaxGetty[24931]: --> [3:ATZ]
Sep 25 16:43:55 i3 FaxGetty[24931]: --> [2:OK]
Sep 25 16:43:55 i3 FaxGetty[24931]: <-- [24:E0V1Q0X3S0=0+FCLASS=0H0\r]
Sep 25 16:44:00 i3 FaxGetty[24931]: MODEM TIMEOUT: reading line from
modem
Sep 25 16:44:00 i3 FaxGetty[24931]: MODEM <Timeout>
Sep 25 16:44:00 i3 FaxGetty[24931]: MODEM set DTR OFF
Sep 25 16:44:00 i3 FaxGetty[24931]: /dev/ttyS2: Can not initialize
modem.
Sep 25 16:44:00 i3 FaxGetty[24931]: STATE CHANGE: BASE -> MODEMWAIT
(timeout 30)


So, HylaFAX does not send "AT" before the other init commands.

-- 
giulioo@pobox.com


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null