HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] activating not to wait for dialtone



Hello Carsten,

I also have to dial 0 to get outside line to dial.

I have modified /var/spool/fax/etc/config.ttyS1

By default you should have:
ModemDialCmd:          ATDT%s

Modify the line so look something like:
ModemDialCmd:           ATDT0,%s                # 0 for outside line



About the no dial tone, see if you can initialize your modem with ATX4


Regards

Victor



----- Original Message -----
From: Carsten Hoeger <choeger@suse.de>
To: <hylafax-users@hylafax.org>
Sent: Friday, August 25, 2000 2:01 PM
Subject: Re: [hylafax-users] activating not to wait for dialtone


> On Fri, Aug 25, John Stolz wrote:
>
> > I installed hylafax now succesfully with the right rpm for SUSE 6.1.
> > Installed also whfc on my nt workstation. got connected to the server.
> > I made a test-fax. After i look in the senq directory something tells:
status: no local dialtone
> >
> > i think that is the problem.
> > How can i configure hylafax not to wait for a dialtone? The problem is
we got a telefonsystem, where i have to dial first 0 to get a dialtone or to
make phonecalls outside the office.
> >
> > could you help me?
>
> Set MODEMDIALCMD (or something like that, see man config) to ATX3DT0%s
>
>
> --
> With best regards,
>
> Carsten Hoeger
>
> SuSE, The Linux Experts, http://www.suse.com
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions