HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Re: puzzle



Hi,

I checked the log: no such message :-((

df reports 541MB free on the disk :-((

Kees



On 6 Jun 2000, Dmitry Bely wrote:

> kees <kees@schoen.nl> writes:
> 
> > I'm running the beta with the protocol patches and it looks well.
> > However sometimes I receive the following mail:
> > 
> > =======================================
> > 
> > To: FaxMaster@schoen3.schoen.nl
> > From: The HylaFAX Receive Agent <fax@schoen.nl>
> > Subject: facsimile not received
> > 
> > An attempt to receive facsimile on ttyS1 failed because:
> > 
> >     
> > 
> >     ---- Transcript of session follows ----
> > 
> > Jun 05 15:59:50.15: [  255]: SESSION BEGIN 00000380 31104208681
> > Jun 05 15:59:50.15: [  255]: <-- [4:ATA\r]
> > Jun 05 15:59:59.40: [  255]: --> [5:+FCON]
> > Jun 05 15:59:59.40: [  255]: ANSWER: FAX CONNECTION
> > Jun 05 15:59:59.40: [  255]: RECV FAX: begin
> > Jun 05 16:00:01.33: [  255]: --> [29:+FTSI: "      +31 10 412XXXX"]
> > Jun 05 16:00:01.33: [  255]: REMOTE TSI "+31 10 412XXXX"
> > Jun 05 16:00:01.44: [  255]: --> [22:+FDCS: 0,3,0,2,1,0,0,0]
> > Jun 05 16:00:01.44: [  255]: REMOTE wants 9600 bit/s
> > Jun 05 16:00:01.44: [  255]: REMOTE wants page width 1728 pixels in 215 mm
> > Jun 05 16:00:01.44: [  255]: REMOTE wants unlimited page length 
> > Jun 05 16:00:01.44: [  255]: REMOTE wants 3.85 line/mm
> > Jun 05 16:00:01.44: [  255]: REMOTE wants 2-D MR
> > Jun 05 16:00:03.41: [  255]: --> [2:OK]
> > Jun 05 16:00:03.41: [  255]: <-- [7:AT+FDR\r]
> > Jun 05 16:00:05.07: [  255]: --> [5:+FCFR]
> > Jun 05 16:00:05.07: [  255]: --> [22:+FDCS: 0,3,0,2,1,0,0,0]
> > Jun 05 16:00:05.07: [  255]: REMOTE wants 9600 bit/s
> > Jun 05 16:00:05.07: [  255]: REMOTE wants page width 1728 pixels in 215 mm
> > Jun 05 16:00:05.07: [  255]: REMOTE wants unlimited page length 
> > Jun 05 16:00:05.07: [  255]: REMOTE wants 3.85 line/mm
> > Jun 05 16:00:05.07: [  255]: REMOTE wants 2-D MR
> > Jun 05 16:00:05.77: [  255]: --> [7:CONNECT]
> > Jun 05 16:00:05.77: [  255]: RECV: begin page
> > Jun 05 16:00:05.77: [  255]: RECV: send trigger 022
> > Jun 05 16:00:32.15: [  255]: RECV: 31421 bytes of data, 1168 total lines
> > Jun 05 16:00:32.15: [  255]: --> [8:+FPTS: 1]
> > Jun 05 16:00:33.37: [  255]: --> [7:+FET: 2]
> > Jun 05 16:00:33.37: [  255]: RECV recv EOP (no more pages or documents)
> > Jun 05 16:00:33.37: [  255]: --> [2:OK]
> > Jun 05 16:00:33.37: [  255]: RECV send MCF (message confirmation)
> > Jun 05 16:00:33.37: [  255]: RECV FAX (00000380): from +31 10 412XXXX,
> > page 1 in 0:30, INF, 3.85 line/mm, 2-D MR
> > Jun 05 16:00:33.37: [  255]: RECV FAX (00000380): recvq/fax00067.tif from +31 10 4124139, route to <unspecified>, 1 pages in 0:34
> > Jun 05 16:00:33.41: [  255]: <-- [7:AT+FDR\r]
> > Jun 05 16:00:37.28: [  255]: --> [8:+FHNG: 0]
> > Jun 05 16:00:37.28: [  255]: REMOTE HANGUP: Normal and proper end of connection (code 0)
> > Jun 05 16:00:37.28: [  255]: RECV FAX: bin/faxrcvd "recvq/fax00067.tif" "ttyS1" "00000380" ""
> > 
> > ==================================================================
> > 
> > The resulting tif file is 8 bytes long:
> > 
> > 0000	49 49 2a 00 00 00 00 00                            II*.....
> > 0008
> 
> Maybe there is no space left on the disk? Check /var/log/daemon.log for
> something like 	"RECV: recvq/fax00067.tif: write error".
> 
> > So there is no error but also no resulting file. I've seen that in the
> > past with version v4.0pl2 as well.
> 
> There *is* an error but Hylafax just reports it and don't remove the broken
> file:
> 
> [from CopyQuality.c++]
> /*
>  * Write a strip of raw data to the receive file.
>  */
> void
> FaxModem::flushRawData(TIFF* tif, tstrip_t strip, u_char* buf, u_int cc)
> {
>     recvTrace("%u bytes of data, %lu total lines", cc, recvEOLCount);
>     if (TIFFWriteRawStrip(tif, strip, buf, cc) == -1)
> 	serverTrace("RECV: %s: write error", TIFFFileName(tif));
> }
> [...]
> 
> Maybe I'll fix this someday...
> 
> Hope to hear from you soon,
> Dmitry
> 
> 



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Project hosted by iFAX Solutions