flexfax: Zyxel 1496E modem error

["Paul van der Vlis" <E.P.van.der.Vlis@inter.nl.net>]

Hello Flexfax list ;-)

I have modem errors using the Zyxel U1496E driver.
Sending "AT+FPHCTO=30" gives the error, I do not find this command in the
Zyxel manual.
After the error some strings are sended a second time, and the same error
occurs again.
Where can I change this string? I do not find it in config.ttyS0.

I use Hylafax 4.1 beta2, Suse Linux 6.3 and a Zyxel U1496E with 6.11a
firmware

Bye,
Paul.

----------log
Mar 31 19:31:54.42: [ 2132]: SESSION BEGIN 00000014 31208738934
Mar 31 19:31:54.42: [ 2132]: SEND FAX: JOB 10 DEST 020-8738934 COMMID
00000014
Mar 31 19:31:54.43: [ 2132]: DELAY 2600 ms
Mar 31 19:31:57.02: [ 2132]: <--
[44:AT&B1&N0&S0*F0S18=2S38.3=1S39=0E0V1Q0S0=0H0\r]
Mar 31 19:31:57.22: [ 2132]: --> [2:OK]
Mar 31 19:31:57.22: [ 2132]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Mar 31 19:31:57.24: [ 2132]: --> [2:OK]
Mar 31 19:31:57.24: [ 2132]: <-- [12:AT+FCLASS=2\r]
Mar 31 19:31:57.37: [ 2132]: --> [2:OK]
Mar 31 19:31:57.37: [ 2132]: <-- [10:AT+FTBC=0\r]
Mar 31 19:31:57.38: [ 2132]: --> [2:OK]
Mar 31 19:31:57.38: [ 2132]: <-- [10:AT+FBOR=0\r]
Mar 31 19:31:57.39: [ 2132]: --> [2:OK]
Mar 31 19:31:57.39: [ 2132]: <-- [13:AT+FPHCTO=30\r]
Mar 31 19:31:57.40: [ 2132]: --> [5:ERROR]
Mar 31 19:31:57.40: [ 2132]: MODEM Command error
Mar 31 19:31:57.40: [ 2132]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Mar 31 19:31:57.42: [ 2132]: --> [2:OK]
Mar 31 19:31:57.42: [ 2132]: <-- [5:ATM0\r]
Mar 31 19:31:57.43: [ 2132]: --> [2:OK]
Mar 31 19:31:57.46: [ 2132]: <-- [12:AT+FCLASS=2\r]
Mar 31 19:31:57.69: [ 2132]: --> [2:OK]
Mar 31 19:31:57.69: [ 2132]: <-- [10:AT+FTBC=0\r]
Mar 31 19:31:57.80: [ 2132]: --> [2:OK]
Mar 31 19:31:57.80: [ 2132]: <-- [10:AT+FBOR=0\r]
Mar 31 19:31:57.91: [ 2132]: --> [2:OK]
Mar 31 19:31:57.91: [ 2132]: <-- [13:AT+FPHCTO=30\r]
Mar 31 19:31:58.02: [ 2132]: --> [5:ERROR]
Mar 31 19:31:58.02: [ 2132]: MODEM Command error
Mar 31 19:31:58.02: [ 2132]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r]
Mar 31 19:31:58.14: [ 2132]: --> [2:OK]
Mar 31 19:31:58.14: [ 2132]: <-- [23:AT+FLID="Van der Vlis"\r]
Mar 31 19:31:58.26: [ 2132]: --> [2:OK]
Mar 31 19:31:58.31: [ 2132]: DIAL 0208738934
---------