Re: flexfax: Zyxel 1496E modem error

[Philipp Steinkrueger <philipp@oberberg.net>]

Paul van der Vlis wrote:
> 
> Hello Flexfax list ;-)
> 
> I have modem errors using the Zyxel U1496E driver.
> Sending "AT+FPHCTO=30" gives the error, I do not find this command in the
> Zyxel manual.
> After the error some strings are sended a second time, and the same error
> occurs again.
> Where can I change this string? I do not find it in config.ttyS0.
> 
> I use Hylafax 4.1 beta2, Suse Linux 6.3 and a Zyxel U1496E with 6.11a
> firmware
> 
6.11a !!
you have to update the firmware. the latest is 6.19 i think.
on the hylafax FAQ Q003 reads: 

	Most of the problems/issues found were fixed in the rev 6.13 firmware. 

You can download the latest version at zyxels homepage...


Philipp