HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
facsimile not received (fwd)
- To: flexfax@sgi.com
- Subject: flexfax: facsimile not received (fwd)
- From: Jose Pedro Pereira <root@sitaf.pt>
- Date: Mon, 24 Jan 2000 15:13:36 +0000 (GMT)
I just get this message when I try to receive a Fax... May you help me
out...
I have mandrake 6.1, hylafax-v4.0pl2 and a Zoom 14.4 VFX External modem...
My config.fax file looks as follows:
CountryCode: 351
AreaCode: 21
FAXNumber: "+351 21 *******"
LongDistancePrefix: ""
InternationalPrefix: 00
DialStringRules: etc/dialrules
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0644
LogFileMode: 0644
DeviceMode: 0600
RingsBeforeAnswer: 3
SpeakerVolume: low
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "SITAF S.A. from the Network Fax Server"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%p of %%t"
MaxRecvPages: 25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType: Class1 # use class 1 interface
ModemRate: 19200
ModemFlowControl: xonxoff
#
ModemNoFlowCmd: AT&K # disable flow control cmd
ModemHardFlowCmd: AT&K3 # hardware flow control cmd
ModemSoftFlowCmd: AT&K4 # software flow control cmd
ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)r1: AT&C1 # setup so DCD reflects carrier (or not)c1
AdaptiveAnswer: yes
AnswerRotary: "fax data"
ModemAnswerCmd: AT+FCLASS=1;A
ModemAnswerDataCmd: ATH+FCLASS=0;A
Class1RecvIdentTimer: 10000
ModemSetupAACmd: AT+FAA=0 # in case modem supports Class 2 also
#
ModemMfrQueryCmd: !Rockwell # no way to query modem
ModemModelQueryCmd: !RC32ACL # not always right
ModemRevQueryCmd: ATI3
#
ModemSendFillOrder: LSB2MSB
ModemRecvFillOrder: MSB2LSB
---------- Forwarded message ----------
Date: 24 Jan 2000 14:16:31 -0000
From: The HylaFAX Receive Agent <fax@mail.net.sitaf.pt>
To: FaxMaster@mail.net.sitaf.pt
Subject: facsimile not received
An attempt to receive facsimile on fax failed because:
COMREC received DCN
---- Transcript of session follows ----
Jan 24 14:15:50.10: [ 759]: SESSION BEGIN 00000007 351218420031
Jan 24 14:15:50.10: [ 759]: <-- [14:AT+FCLASS=1;A\r]
Jan 24 14:15:55.55: [ 759]: --> [7:CONNECT]
Jan 24 14:15:55.55: [ 759]: ANSWER: FAX CONNECTION
Jan 24 14:15:55.55: [ 759]: RECV FAX: begin
Jan 24 14:15:57.15: [ 759]: --> [7:CONNECT]
Jan 24 14:15:57.63: [ 759]: --> [2:OK]
Jan 24 14:15:57.63: [ 759]: <-- [9:AT+FRH=3\r]
Jan 24 14:15:58.01: [ 759]: --> [7:CONNECT]
Jan 24 14:15:59.38: [ 759]: --> [2:OK]
Jan 24 14:15:59.38: [ 759]: REMOTE TSI "351218461211"
Jan 24 14:15:59.38: [ 759]: <-- [9:AT+FRH=3\r]
Jan 24 14:15:59.40: [ 759]: --> [7:CONNECT]
Jan 24 14:15:59.70: [ 759]: --> [2:OK]
Jan 24 14:15:59.70: [ 759]: REMOTE wants 14400 bit/s
Jan 24 14:15:59.70: [ 759]: REMOTE wants page width 1728 pixels in 215 mm
Jan 24 14:15:59.70: [ 759]: REMOTE wants unlimited page length
Jan 24 14:15:59.70: [ 759]: REMOTE wants 3.85 line/mm
Jan 24 14:15:59.70: [ 759]: REMOTE wants 2-D MR
Jan 24 14:15:59.70: [ 759]: RECV training at v.17 14400 bit/s
Jan 24 14:15:59.70: [ 759]: <-- [11:AT+FRM=145\r]
Jan 24 14:16:01.40: [ 759]: --> [7:CONNECT]
Jan 24 14:16:02.97: [ 759]: RECV: TCF 2785 bytes, 2% non-zero, 2702 zero-run
Jan 24 14:16:02.97: [ 759]: --> [10:NO CARRIER]
Jan 24 14:16:02.97: [ 759]: DELAY 75 ms
Jan 24 14:16:03.05: [ 759]: <-- [9:AT+FTH=3\r]
Jan 24 14:16:03.09: [ 759]: --> [7:CONNECT]
Jan 24 14:16:04.37: [ 759]: --> [2:OK]
Jan 24 14:16:04.37: [ 759]: TRAINING succeeded
Jan 24 14:16:04.37: [ 759]: <-- [11:AT+FRM=146\r]
Jan 24 14:16:05.04: [ 759]: --> [7:CONNECT]
Jan 24 14:16:05.04: [ 759]: RECV: begin page
Jan 24 14:16:26.50: [ 759]: RECV: 1463 total lines, 1346 bad lines, 124 consecutive bad lines
Jan 24 14:16:26.50: [ 759]: RECV: REJECT page quality, 7% good lines (95% required)
Jan 24 14:16:26.50: [ 759]: RECV: end page
Jan 24 14:16:26.50: [ 759]: --> [10:NO CARRIER]
Jan 24 14:16:26.50: [ 759]: <-- [9:AT+FRH=3\r]
Jan 24 14:16:26.85: [ 759]: --> [7:CONNECT]
Jan 24 14:16:27.65: [ 759]: --> [2:OK]
Jan 24 14:16:27.65: [ 759]: RECV recv EOP (no more pages or documents)
Jan 24 14:16:27.65: [ 759]: <-- [9:AT+FTH=3\r]
Jan 24 14:16:27.71: [ 759]: --> [7:CONNECT]
Jan 24 14:16:28.99: [ 759]: --> [2:OK]
Jan 24 14:16:28.99: [ 759]: RECV send RTN (retrain negative)
Jan 24 14:16:28.99: [ 759]: <-- [9:AT+FRH=3\r]
Jan 24 14:16:29.35: [ 759]: --> [7:CONNECT]
Jan 24 14:16:30.27: [ 759]: --> [2:OK]
Jan 24 14:16:30.27: [ 759]: RECV recv DCN
Jan 24 14:16:30.27: [ 759]: RECV FAX (00000007): recvq/fax00003.tif from 351218461211, route to <unspecified>, 0 pages in 0:35
Jan 24 14:16:30.27: [ 759]: RECV FAX: COMREC received DCN
Jan 24 14:16:30.27: [ 759]: <-- [9:AT+FTH=3\r]
Jan 24 14:16:30.33: [ 759]: --> [7:CONNECT]
Jan 24 14:16:31.61: [ 759]: --> [2:OK]
Jan 24 14:16:31.61: [ 759]: RECV FAX (00000007): session with 351218461211 terminated abnormally: COMREC received DCN
Jan 24 14:16:31.61: [ 759]: RECV FAX: bin/faxrcvd "recvq/fax00003.tif" "fax" "00000007" "COMREC received DCN"