 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Just curious
- To: Hylafax <flexfax@sgi.com>
- Subject: flexfax: Just curious
- From: George Zeigler <genz1968@mtu-net.ru>
- Reply-To: genz1968@mtu-net.ru
- Date: Thu, 13 Jan 2000 02:59:51 +0000
Hello, Just curious. I was having a fax success rate of about 3% . This is one of the successful ones. I've since got my config.ttyS1 working. I'm just wondering, how did this fax get out with "input flow NONE, output flow NONE"? This is from /var/spool/fax/mail/c0000041 file Thanks George Jan 02 09:14:13.72: [ 1955]: SESSION BEGIN 00000041 70952580635 Jan 02 09:14:13.72: [ 1955]: SEND FAX: JOB 30 DEST 258-0635 COMMID 00000041 Jan 02 09:14:13.72: [ 1955]: MODEM set DTR OFF Jan 02 09:14:13.72: [ 1955]: DELAY 2600 ms Jan 02 09:14:16.32: [ 1955]: MODEM set DTR ON Jan 02 09:14:16.32: [ 1955]: MODEM set baud rate: 19200 baud, input flow NONE, output flow NONE Jan 02 09:14:16.32: [ 1955]: MODEM flush i/o Jan 02 09:14:16.32: [ 1955]: <-- [15:ATE0V1Q0S0=0H0\r] Jan 02 09:14:16.36: [ 1955]: --> [2:OK] Jan 02 09:14:16.36: [ 1955]: <-- [12:ATS8=2S7=60\r] Jan 02 09:14:16.37: [ 1955]: --> [2:OK] Jan 02 09:14:16.37: [ 1955]: <-- [12:AT+FCLASS=1\r] Jan 02 09:14:16.38: [ 1955]: --> [2:OK] Jan 02 09:14:16.38: [ 1955]: <-- [5:ATM0\r] Jan 02 09:14:16.39: [ 1955]: --> [2:OK] Jan 02 09:14:16.39: [ 1955]: MODEM input buffering enabled Jan 02 09:14:16.39: [ 1955]: <-- [12:AT+FCLASS=1\r] Jan 02 09:14:16.50: [ 1955]: --> [2:OK] Jan 02 09:14:16.50: [ 1955]: DIAL 2580635 Jan 02 09:14:16.50: [ 1955]: <-- [13:ATDP2580635@\r] Jan 02 09:14:42.82: [ 1955]: --> [7:CONNECT] Jan 02 09:14:42.82: [ 1955]: MODEM input buffering disabled Jan 02 09:14:45.26: [ 1955]: --> [2:OK] Jan 02 09:14:45.26: [ 1955]: <-- [9:AT+FRH=3\r] Jan 02 09:14:45.27: [ 1955]: --> [7:CONNECT] Jan 02 09:14:46.04: [ 1955]: --> [2:OK] Jan 02 09:14:46.04: [ 1955]: REMOTE CSI "+7095 258 0635" Jan 02 09:14:46.04: [ 1955]: <-- [9:AT+FRH=3\r] Jan 02 09:14:46.05: [ 1955]: --> [7:CONNECT] Jan 02 09:14:46.45: [ 1955]: --> [2:OK] Jan 02 09:14:46.45: [ 1955]: REMOTE best rate 14400 bit/s Jan 02 09:14:46.45: [ 1955]: REMOTE max page width 2432 pixels in 303 mm Jan 02 09:14:46.45: [ 1955]: REMOTE max unlimited page length Jan 02 09:14:46.45: [ 1955]: REMOTE best vres 7.7 line/mm Jan 02 09:14:46.45: [ 1955]: REMOTE best format 2-D MMR Jan 02 09:14:46.45: [ 1955]: REMOTE supports T.30 Annex A, ECM Jan 02 09:14:46.45: [ 1955]: REMOTE best 0 ms/scanline Jan 02 09:14:46.45: [ 1955]: USE 14400 bit/s Jan 02 09:14:46.45: [ 1955]: USE 0 ms/scanline Jan 02 09:14:46.45: [ 1955]: SEND file "docq/doc29.ps;00" Jan 02 09:14:46.45: [ 1955]: USE page width 1728 pixels in 215 mm Jan 02 09:14:46.45: [ 1955]: USE unlimited page length Jan 02 09:14:46.45: [ 1955]: USE 3.85 line/mm Jan 02 09:14:46.45: [ 1955]: USE 1-D MR Jan 02 09:14:46.45: [ 1955]: SEND training at v.17 14400 bit/s Jan 02 09:14:46.45: [ 1955]: <-- [9:AT+FTH=3\r] Jan 02 09:14:47.39: [ 1955]: --> [7:CONNECT] Jan 02 09:14:47.39: [ 1955]: <-- data [23] Jan 02 09:14:47.39: [ 1955]: <-- data [2] Jan 02 09:14:47.41: [ 1955]: --> [7:CONNECT] Jan 02 09:14:47.41: [ 1955]: <-- data [6] Jan 02 09:14:47.41: [ 1955]: <-- data [2] Jan 02 09:14:48.49: [ 1955]: --> [2:OK] Jan 02 09:14:48.49: [ 1955]: DELAY 75 ms Jan 02 09:14:48.57: [ 1955]: <-- [11:AT+FTM=145\r] Jan 02 09:14:48.59: [ 1955]: --> [7:CONNECT] Jan 02 09:14:48.59: [ 1955]: <-- data [1024] Jan 02 09:14:48.59: [ 1955]: <-- data [1024] Jan 02 09:14:48.59: [ 1955]: <-- data [652] Jan 02 09:14:48.59: [ 1955]: <-- data [2] Jan 02 09:14:51.72: [ 1955]: --> [2:OK] Jan 02 09:14:51.72: [ 1955]: <-- [9:AT+FRH=3\r] Jan 02 09:14:51.84: [ 1955]: --> [7:CONNECT] Jan 02 09:14:52.97: [ 1955]: --> [2:OK] Jan 02 09:14:52.97: [ 1955]: TRAINING succeeded Jan 02 09:14:52.97: [ 1955]: <-- [11:AT+FTM=146\r] Jan 02 09:14:53.06: [ 1955]: --> [7:CONNECT] Jan 02 09:14:53.06: [ 1955]: SEND begin page Jan 02 09:14:53.06: [ 1955]: <-- data [1028] Jan 02 09:14:53.06: [ 1955]: <-- data [1028] Jan 02 09:14:53.06: [ 1955]: <-- data [1029] Jan 02 09:14:53.06: [ 1955]: <-- data [1025] Jan 02 09:14:54.26: [ 1955]: <-- data [1027] Jan 02 09:14:54.26: [ 1955]: <-- data [1026] Jan 02 09:14:54.26: [ 1955]: <-- data [1028] Jan 02 09:14:54.26: [ 1955]: <-- data [1027] Jan 02 09:14:55.85: [ 1955]: <-- data [1029] Jan 02 09:14:55.86: [ 1955]: <-- data [1028] Jan 02 09:14:55.86: [ 1955]: <-- data [1028] Jan 02 09:14:55.86: [ 1955]: <-- data [1026] Jan 02 09:14:58.04: [ 1955]: <-- data [1030] Jan 02 09:14:58.04: [ 1955]: <-- data [1028] Jan 02 09:14:58.04: [ 1955]: <-- data [1026] Jan 02 09:14:58.04: [ 1955]: <-- data [1025] Jan 02 09:15:00.14: [ 1955]: <-- data [1028] Jan 02 09:15:00.14: [ 1955]: <-- data [1027] Jan 02 09:15:00.14: [ 1955]: <-- data [1026] Jan 02 09:15:02.24: [ 1955]: <-- data [970] Jan 02 09:15:02.24: [ 1955]: SENT 20425 bytes of data Jan 02 09:15:02.24: [ 1955]: SEND 1D RTC Jan 02 09:15:02.24: [ 1955]: <-- data [29] Jan 02 09:15:02.24: [ 1955]: <-- data [2] Jan 02 09:15:02.24: [ 1955]: SEND end page Jan 02 09:15:04.80: [ 1955]: --> [2:OK] Jan 02 09:15:04.80: [ 1955]: DELAY 75 ms Jan 02 09:15:04.88: [ 1955]: SEND send MPS (more pages, same document) Jan 02 09:15:04.88: [ 1955]: <-- [9:AT+FTH=3\r] Jan 02 09:15:05.74: [ 1955]: --> [7:CONNECT] Jan 02 09:15:05.74: [ 1955]: <-- data [3] Jan 02 09:15:05.74: [ 1955]: <-- data [2] Jan 02 09:15:06.06: [ 1955]: --> [2:OK] Jan 02 09:15:06.06: [ 1955]: <-- [9:AT+FRH=3\r] Jan 02 09:15:06.31: [ 1955]: --> [7:CONNECT] Jan 02 09:15:07.47: [ 1955]: --> [2:OK] Jan 02 09:15:07.47: [ 1955]: SEND recv MCF (message confirmation) Jan 02 09:15:07.47: [ 1955]: SEND FAX (00000041): FROM root@george.hello TO 258-0635 (page 1 of 3 sent in 0:21) Jan 02 09:15:07.47: [ 1955]: USE page width 1728 pixels in 215 mm Jan 02 09:15:07.47: [ 1955]: USE unlimited page length Jan 02 09:15:07.47: [ 1955]: USE 3.85 line/mm Jan 02 09:15:07.47: [ 1955]: USE 1-D MR Jan 02 09:15:07.47: [ 1955]: <-- [11:AT+FTM=146\r] Jan 02 09:15:07.56: [ 1955]: --> [7:CONNECT] Jan 02 09:15:07.56: [ 1955]: SEND begin page Jan 02 09:15:07.56: [ 1955]: <-- data [1029] Jan 02 09:15:07.56: [ 1955]: <-- data [1026] Jan 02 09:15:07.56: [ 1955]: <-- data [1029] Jan 02 09:15:07.56: [ 1955]: <-- data [1026] Jan 02 09:15:08.76: [ 1955]: <-- data [1027] Jan 02 09:15:08.76: [ 1955]: <-- data [1024] Jan 02 09:15:08.76: [ 1955]: <-- data [1027] Jan 02 09:15:08.76: [ 1955]: <-- data [1026] Jan 02 09:15:10.35: [ 1955]: <-- data [1026] Jan 02 09:15:10.35: [ 1955]: <-- data [1028] Jan 02 09:15:10.35: [ 1955]: <-- data [1030] Jan 02 09:15:10.35: [ 1955]: <-- data [1024] Jan 02 09:15:12.51: [ 1955]: <-- data [1028] Jan 02 09:15:12.51: [ 1955]: <-- data [1027] Jan 02 09:15:12.51: [ 1955]: <-- data [1027] Jan 02 09:15:12.51: [ 1955]: <-- data [1025] Jan 02 09:15:14.61: [ 1955]: <-- data [1030] Jan 02 09:15:14.61: [ 1955]: <-- data [1033] Jan 02 09:15:14.61: [ 1955]: <-- data [1027] Jan 02 09:15:16.78: [ 1955]: <-- data [375] Jan 02 09:15:16.78: [ 1955]: SENT 19831 bytes of data Jan 02 09:15:16.78: [ 1955]: SEND 1D RTC Jan 02 09:15:16.78: [ 1955]: <-- data [29] Jan 02 09:15:16.78: [ 1955]: <-- data [2] Jan 02 09:15:16.78: [ 1955]: SEND end page Jan 02 09:15:18.98: [ 1955]: --> [2:OK] Jan 02 09:15:18.98: [ 1955]: DELAY 75 ms Jan 02 09:15:19.06: [ 1955]: SEND send MPS (more pages, same document) Jan 02 09:15:19.06: [ 1955]: <-- [9:AT+FTH=3\r] Jan 02 09:15:19.92: [ 1955]: --> [7:CONNECT] Jan 02 09:15:19.92: [ 1955]: <-- data [3] Jan 02 09:15:19.92: [ 1955]: <-- data [2] Jan 02 09:15:20.24: [ 1955]: --> [2:OK] Jan 02 09:15:20.24: [ 1955]: <-- [9:AT+FRH=3\r] Jan 02 09:15:20.51: [ 1955]: --> [7:CONNECT] Jan 02 09:15:21.68: [ 1955]: --> [2:OK] Jan 02 09:15:21.68: [ 1955]: SEND recv MCF (message confirmation) Jan 02 09:15:21.68: [ 1955]: SEND FAX (00000041): FROM root@george.hello TO 258-0635 (page 2 of 3 sent in 0:14) Jan 02 09:15:21.68: [ 1955]: USE page width 1728 pixels in 215 mm Jan 02 09:15:21.68: [ 1955]: USE unlimited page length Jan 02 09:15:21.68: [ 1955]: USE 3.85 line/mm Jan 02 09:15:21.68: [ 1955]: USE 1-D MR Jan 02 09:15:21.68: [ 1955]: <-- [11:AT+FTM=146\r] Jan 02 09:15:21.77: [ 1955]: --> [7:CONNECT] Jan 02 09:15:21.77: [ 1955]: SEND begin page Jan 02 09:15:21.77: [ 1955]: <-- data [1031] Jan 02 09:15:21.77: [ 1955]: <-- data [1027] Jan 02 09:15:21.77: [ 1955]: <-- data [1032] Jan 02 09:15:21.77: [ 1955]: <-- data [1025] Jan 02 09:15:22.97: [ 1955]: <-- data [1027] Jan 02 09:15:22.97: [ 1955]: <-- data [1033] Jan 02 09:15:22.97: [ 1955]: <-- data [1030] Jan 02 09:15:22.97: [ 1955]: <-- data [1031] Jan 02 09:15:24.56: [ 1955]: <-- data [1030] Jan 02 09:15:24.57: [ 1955]: <-- data [192] Jan 02 09:15:24.57: [ 1955]: SENT 9408 bytes of data Jan 02 09:15:24.57: [ 1955]: SEND 1D RTC Jan 02 09:15:24.57: [ 1955]: <-- data [29] Jan 02 09:15:24.57: [ 1955]: <-- data [2] Jan 02 09:15:24.57: [ 1955]: SEND end page Jan 02 09:15:27.39: [ 1955]: --> [2:OK] Jan 02 09:15:27.39: [ 1955]: DELAY 95 ms Jan 02 09:15:27.49: [ 1955]: SEND send EOP (no more pages or documents) Jan 02 09:15:27.49: [ 1955]: <-- [9:AT+FTH=3\r] Jan 02 09:15:28.35: [ 1955]: --> [7:CONNECT] Jan 02 09:15:28.35: [ 1955]: <-- data [3] Jan 02 09:15:28.35: [ 1955]: <-- data [2] Jan 02 09:15:28.67: [ 1955]: --> [2:OK] Jan 02 09:15:28.67: [ 1955]: <-- [9:AT+FRH=3\r] Jan 02 09:15:28.95: [ 1955]: --> [7:CONNECT] Jan 02 09:15:30.12: [ 1955]: --> [2:OK] Jan 02 09:15:30.12: [ 1955]: SEND recv MCF (message confirmation) Jan 02 09:15:30.12: [ 1955]: SEND FAX (00000041): FROM root@george.hello TO 258-0635 (page 3 of 3 sent in 0:09) Jan 02 09:15:30.12: [ 1955]: SEND FAX (00000041): FROM root@george.hello TO 258-0635 (docq/doc29.ps;00 sent in 0:44) Jan 02 09:15:30.12: [ 1955]: <-- [9:AT+FTH=3\r] Jan 02 09:15:31.06: [ 1955]: --> [7:CONNECT] Jan 02 09:15:31.06: [ 1955]: <-- data [3] Jan 02 09:15:31.06: [ 1955]: <-- data [2] Jan 02 09:15:31.38: [ 1955]: --> [2:OK] Jan 02 09:15:31.38: [ 1955]: MODEM input buffering enabled Jan 02 09:15:31.38: [ 1955]: <-- [5:ATH0\r] Jan 02 09:15:32.53: [ 1955]: --> [2:OK] Jan 02 09:15:32.53: [ 1955]: MODEM set DTR OFF Jan 02 09:15:32.53: [ 1955]: SESSION END -- My personal website http://www.firstnethou.com/gz/welcome.ht
- Follow-Ups:
- Re: Just curious
- From: Harry Holt <hholt@home.com>
- Re: Just curious
- Prev by Date: Re: Probemodem errors?
- Next by Date: Re: Help! HylaFax won't handshake
- Prev by thread: ELSA ML Office and RTS
- Next by thread: Re: Just curious
- Index(es):
Project hosted by iFAX Solutions