flexfax: Probemodem errors?

[George Zeigler <genz1968@mtu-net.ru>]

Hello,
	I ran probemodem.  I have tons of 
"/bin/stty: standard input: unable to perform all requested operations"
lines.  Also, a bunch of Errors.  Is this a concern?
	My modem is a LinkSys 10/100 + 56k combo PCMCIA card
	The output of probemodem is shown below.
Thanks
George
************

Serial port that modem is connected to []? ttyS1
Hmm, there does not appear to be an fuser command on your machine.
This means that I am unable to insure that all processes using the
modem have been killed.  I will keep going, but beware that you may
have competition for the modem.

Now we are going to probe the tty port.  This takes a few seconds,
so be patient.  Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).

Probing for best speed to talk to modem: 38400 OK.
/bin/stty: standard input: unable to perform all requested operations
[1]+  Terminated              ( trap 0 1 2 15; while true; do
    sleep 10; echo ""; echo "Hmm, something seems to be hung, check your modem e
h?";
done )

This looks like a Class 1+2 modem.

/bin/stty: standard input: unable to perform all requested operations
ATI0    RESULT = "OK"   RESPONSE = "LF560MX VER 2.01 V.90 (VER 1.14 TBR21 V.2)"
/bin/stty: standard input: unable to perform all requested operations
ATI1    RESULT = "OK"   RESPONSE = "C936"
/bin/stty: standard input: unable to perform all requested operations
ATI2    RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
ATI3    RESULT = "OK"   RESPONSE = "LF560MX VER 2.01 V.90 (VER 1.14 TBR21 V.2)"

Class 1 stuff...

/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?      RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA=?        RESULT = "OK"   RESPONSE = "0,1"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA? RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FAE=?        RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FAE? RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FTH=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FRH=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FTM=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FRM=?        RESULT = "OK"   RESPONSE = "3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FTS=?        RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FRS=?        RESULT = "ERROR"        RESPONSE = "ERROR"

Class 2 stuff...

/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=?     RESULT = "OK"   RESPONSE = "0,1,2"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?      RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=0     RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=1     RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=2     RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS?      RESULT = "OK"   RESPONSE = "2"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK=?      RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK?       RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA=?        RESULT = "OK"   RESPONSE = "0,1"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA? RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FAXERR=?     RESULT = "OK"   RESPONSE = "0-255"
/bin/stty: standard input: unable to perform all requested operations
AT+FAXERR?      RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FBADLIN=?    RESULT = "OK"   RESPONSE = "0-255"
/bin/stty: standard input: unable to perform all requested operations
AT+FBADLIN?     RESULT = "OK"   RESPONSE = "5"
/bin/stty: standard input: unable to perform all requested operations
AT+FBADMUL=?    RESULT = "OK"   RESPONSE = "0-255"
/bin/stty: standard input: unable to perform all requested operations
AT+FBADMUL?     RESULT = "OK"   RESPONSE = "20"
/bin/stty: standard input: unable to perform all requested operations
AT+FBOR=?       RESULT = "OK"   RESPONSE = "0-3"
/bin/stty: standard input: unable to perform all requested operations
AT+FBOR?        RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FBUF=?       RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FBUF?        RESULT = "OK"   RESPONSE = "2448,2252,2124,1"
/bin/stty: standard input: unable to perform all requested operations
AT+FBUG=?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FBUG?        RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCIG=?       RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCIG?        RESULT = ""     RESPONSE = ""
/bin/stty: standard input: unable to perform all requested operations
AT+FCQ=?        RESULT = "OK"   RESPONSE = "0-1"
/bin/stty: standard input: unable to perform all requested operations
AT+FCQ? RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCR=?        RESULT = "OK"   RESPONSE = "0,1"
/bin/stty: standard input: unable to perform all requested operations
AT+FCR? RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FTBC=?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FTBC?        RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FDCC=?       RESULT = "OK"   RESPONSE = "(0,1),(0-5),(0),(0-2),(0),(0),(0),(0-7)"
/bin/stty: standard input: unable to perform all requested operations
AT+FDCC?        RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FDCS=?       RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FDCS?        RESULT = "OK"   RESPONSE = "0,0,0,0,0,0,0,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FDIS=?       RESULT = "OK"   RESPONSE = "(0,1),(0-5),(0),(0-2),(0),(0),(0),(0-7)"
/bin/stty: standard input: unable to perform all requested operations
AT+FDIS?        RESULT = "OK"   RESPONSE = "1,5,0,2,0,0,0,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FDT=?        RESULT = "OK"   RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FDT? RESULT = "ERROR"        RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FECM=?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FECM?        RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FET=?        RESULT = "OK"   RESPONSE = "0-7"
/bin/stty: standard input: unable to perform all requested operations
AT+FET? RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FLID=?       RESULT = "OK"   RESPONSE = "(20),(32-127)"
/bin/stty: standard input: unable to perform all requested operations
AT+FLID?        RESULT = "OK"   RESPONSE = ""
/bin/stty: standard input: unable to perform all requested operations
AT+FLNFC=?      RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FLNFC?       RESULT = "OK"   RESPONSE = "0"
 RESULT = "OK"   RESPONSE = "0"!E/bin/stty: standard input: unable to perform all requested operationsx™˜°RL "RO O                          ˜ˆAT+FLPL=?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FLPL?        RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FMDL?        RESULT = "OK"   RESPONSE = "LF560MX VER 2.01 V.90 (VER 1.14 TBR21 V.2)"
/bin/stty: standard input: unable to perform all requested operations
AT+FMFR?        RESULT = "OK"   RESPONSE = "LF560MX VER 2.01 V.90 (VER 1.14 TBR21 V.2)"
/bin/stty: standard input: unable to perform all requested operations
AT+FMINSP=?     RESULT = "OK"   RESPONSE = "0-3"
/bin/stty: standard input: unable to perform all requested operations
AT+FMINSP?      RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FPHCTO=?     RESULT = "OK"   RESPONSE = "0-255"
/bin/stty: standard input: unable to perform all requested operations
AT+FPHCTO?      RESULT = "OK"   RESPONSE = "30"
/bin/stty: standard input: unable to perform all requested operations
AT+FPTS=?       RESULT = "OK"   RESPONSE = "0-3"
/bin/stty: standard input: unable to perform all requested operations
AT+FPTS?        RESULT = "OK"   RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FRBC=?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FRBC?        RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FREL=?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FREL?        RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FREV?        RESULT = "OK"   RESPONSE = "p60598a"
/bin/stty: standard input: unable to perform all requested operations
AT+FSPL=?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FSPL?        RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FTBC=?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FTBC?        RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FVRFC=?      RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FVRFC?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FWDFC=?      RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FWDFC?       RESULT = "OK"   RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FK=? RESULT = "OK"   RESPONSE = "OK"                                
--
My personal website
http://www.firstnethou.com/gz/welcome.htm