RE: flexfax: Phase C errors with USR 33.6

[=?WINDOWS-1257?Q?Rimantas_=DEylius?= <RimantasZ@VilniusConsult.lt>]

hi,

same phase C error I receive with USR courier V everything. what is
specific, that i receive this error from specific fax machines (that is,
i know few senders, who can not send me fax through modem). when they
send fax to fax machine, it works.

rimantas


> -----Original Message-----
> From:	Dave Wreski [SMTP:dave@nic.com]
> Sent:	Wednesday, October 06, 1999 7:47 PM
> To:	HylaFAX
> Subject:	flexfax: Phase C errors with USR 33.6
> 
> 
> Hi all.  I'm using hylafax-4.0pl2 on RH6 with an external USR
> sportster
> 33.6 modem.  It seems to be working ok, except for the occasional
> problem:
> 
> 1.  I receive the following messages occasionally:
> 
> Oct  6 13:40:43 fax FaxGetty[5353]: RECV FAX (00000095): session with
> 201
> 555 0160 terminated abnormally: Unspecified Phase C error, including
> too
> much delay between TCF and +FDR command
> Oct  6 13:40:43 fax FaxGetty[5353]: RECV FAX: bin/faxrcvd
> "recvq/fax00063.tif" "ttyS0" "00000095" "Unspecified Phase C error,
> including too much delay between TCF and +FDR command"
> 
> It seems to have received part of the fax, but not all of it.  What
> could
> be causing this?  The remote end, perhaps?
> 
> 2.  Occasionally faxstat reports "waiting for modem to become ready"
> when
> in fact there is no fax coming in.  It seems to occasionally not hang
> up
> after receiving a call.  I need to kill faxgetty and getty, at which
> point
> it works again.
> 
> Thanks,
> Dave
>