HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Multi-Tech MT3334ZDX modem question



On Wed, Aug 18, 1999 at 07:31:40AM -0500, Alan Hanson wrote:
> HylaFAX 4.0pl2 version
> Solaris 2.7 server
> 
> We have purchased a couple of new Multi-Tech MT3334ZDX modems for
> out-going fax.  I can not get these modems to send the data out.  It
> dials up the other modem and immediately disconnects when the called
> modem comes online (1/2 sec).  The "faxstat -s" indicates that there is
> no response from the called fax.
> 
> I have an older Multi-Tech MT2834ZDX modem that worked immediately on
> setup.
> 
> In using the "faxaddmodem" routine, I have accepted the default values
> and I have attempted to customize the settings and nothing works for me
> on these new modems.
> 
> I have attempted to check the settings between the old and new modems
> using the AT&V command and all the settings that display are identical. 
> Not all the setting show up though.  How can I see all the settings, for
> example all the Sn settings?

Check the config.ttyXX file, make sure there's no '@' in the
dialstring. 

Cheers,
-- jra
-- 
Jay R. Ashworth                                                jra@baylink.com
Member of the Technical Staff     Buy copies of The New Hackers Dictionary.
The Suncoast Freenet            Give them to all your friends.
Tampa Bay, Florida     http://www.ccil.org/jargon/             +1 813 790 7592




Project hosted by iFAX Solutions