 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Hylafax with AVM-B1 PCI ISDN: Problems
- To: flexfax@sgi.com, "ink@k-is.de" <ink@k-is.de>
- Subject: flexfax: Hylafax with AVM-B1 PCI ISDN: Problems
- From: Kai Havel <kah@k-is.de>
- Date: Mon, 07 Jun 1999 15:52:34 +0200
Dear Gentlemen,
I´m trying to use your Hylafax-Faxserver on my AVM-B1 PCI ISDN - card,
placed in
a running Linux system. The ISDN device works just fine on ppp
connections to my provider.
The configurations and addons for the AVM-B1 card are already done.
Never the less,
each time, I try to send a faximile, the receivant seems to be buisy.
Now my question: Couldit be, that the ISDN Card is still tryes to send
to "Isdn-Fax-Machines"
instead of ordinary faxmodems, and each time it connects to an analog
faxmaschine it fails?
To get an idea, what makes me think so, I attach a part of the
messages-file to this mail.
I would be very thankfull for a hint or idea, to solve my problem.
Thank you in advance,
Kai Havel
--
----------------------------------------------------------
--- Kai Havel * (K-IS)
--- Am Knuss 13 * 63505 Langenselbold
--- Tel.: 06184/902167 * Fax : 06184 / 901279
--- mailto:kah@k-is.de * Internet : http://www.k-is.de
----------------------------------------------------------
Jun 7 15:20:04 sir001 kernel: isdn_tty_close normal exit Jun 7 15:20:04 sir001 FaxSend[858]: SEND FAILED: Busy signal detected Jun 7 15:20:07 sir001 kernel: ip_rewrite_addrs(): shifting saddr from 192.168.10.254 to 192.168.101.105 (state 1) Jun 7 15:22:41 sir001 HylaFAX[879]: Filesystem has SysV-style file creation semantics. Jun 7 15:22:41 sir001 FaxQueuer[266]: SUBMIT JOB 404 Jun 7 15:22:41 sir001 FaxQueuer[266]: JOB 404 (blocked dest +4927382775 pri 127 tts 0:00 killtime 2:59:00): Blocked by concurrent jobs Jun 7 15:22:46 sir001 FaxQueuer[266]: JOB 402 (active dest +496184901279 pri 122 tts 0:00 killtime 2:42:34): CMD START /usr/lib/fax/faxsend -m cui2 sendq/q402 (PID 884) Jun 7 15:22:46 sir001 kernel: isdn_tty_open cui2, count = 0 Jun 7 15:22:46 sir001 kernel: starting up ttyi2 ... Jun 7 15:22:46 sir001 kernel: isdn_tty_open ttyi2 successful... Jun 7 15:22:46 sir001 kernel: isdn_tty_open normal exit Jun 7 15:22:47 sir001 FaxSend[884]: MODEM set DTR OFF Jun 7 15:22:47 sir001 kernel: ttyI2 ioctl TIOCMBIC Jun 7 15:22:47 sir001 kernel: Mhup in TIOCMBIC Jun 7 15:22:47 sir001 kernel: Mhup ttyI2 Jun 7 15:22:47 sir001 FaxSend[884]: DELAY 2600 ms Jun 7 15:22:49 sir001 FaxSend[884]: MODEM set DTR ON Jun 7 15:22:49 sir001 kernel: ttyI2 ioctl TIOCMBIS Jun 7 15:22:49 sir001 kernel: Shutting down isdnmodem port 2 .... Jun 7 15:22:49 sir001 kernel: isdn_tty_close normal exit Jun 7 15:22:49 sir001 kernel: isdn_tty_open cui2, count = 0 Jun 7 15:22:49 sir001 kernel: starting up ttyi2 ... Jun 7 15:22:49 sir001 kernel: isdn_tty_open ttyi2 successful... Jun 7 15:22:49 sir001 kernel: isdn_tty_open normal exit Jun 7 15:22:49 sir001 kernel: ttyI2 ioctl TCSETS Jun 7 15:22:49 sir001 kernel: AT: 'ATE0V1Q0S0=0H0' Jun 7 15:22:49 sir001 FaxSend[884]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF Jun 7 15:22:49 sir001 FaxSend[884]: MODEM flush i/o Jun 7 15:22:49 sir001 FaxSend[884]: <-- [15:ATE0V1Q0S0=0H0\r] Jun 7 15:22:49 sir001 FaxSend[884]: --> [14:ATE0V1Q0S0=0H0] Jun 7 15:22:49 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:49 sir001 FaxSend[884]: <-- [16:ATS8=2S7=60q0q0\r] Jun 7 15:22:49 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:49 sir001 FaxSend[884]: <-- [12:AT+FCLASS=?\r] Jun 7 15:22:49 sir001 kernel: AT: 'ATS8=2S7=60Q0Q0' Jun 7 15:22:49 sir001 kernel: AT: 'AT+FCLASS=?' Jun 7 15:22:49 sir001 kernel: isdn_tty: FCLASS=? Jun 7 15:22:50 sir001 kernel: AT: 'AT+FCLASS=2' Jun 7 15:22:50 sir001 kernel: isdn_tty: FCLASS=2 Jun 7 15:22:50 sir001 kernel: AT: 'AT+FMFR?' Jun 7 15:22:50 sir001 kernel: isdn_tty: FMFR? Jun 7 15:22:50 sir001 FaxSend[884]: --> [5:0,2,8] Jun 7 15:22:50 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:50 sir001 FaxSend[884]: <-- [12:AT+FCLASS=2\r] Jun 7 15:22:50 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:50 sir001 FaxSend[884]: <-- [9:AT+FMFR?\r] Jun 7 15:22:50 sir001 FaxSend[884]: --> [7:ISDNfax] Jun 7 15:22:50 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:50 sir001 FaxSend[884]: <-- [9:AT+FMDL?\r] Jun 7 15:22:50 sir001 kernel: AT: 'AT+FMDL?' Jun 7 15:22:50 sir001 kernel: isdn_tty: FMDL? Jun 7 15:22:50 sir001 kernel: AT: 'AT+FREV?' Jun 7 15:22:50 sir001 kernel: isdn_tty: unknown token=>AT+FREV?< Jun 7 15:22:50 sir001 kernel: AT: 'AT+FDCC=?' Jun 7 15:22:50 sir001 FaxSend[884]: --> [6:AVM-B1] Jun 7 15:22:50 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:50 sir001 FaxSend[884]: <-- [9:AT+FREV?\r] Jun 7 15:22:50 sir001 FaxSend[884]: --> [5:ERROR] Jun 7 15:22:50 sir001 FaxSend[884]: <-- [10:AT+FDCC=?\r] Jun 7 15:22:50 sir001 FaxSend[884]: --> [43:(0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)] Jun 7 15:22:50 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:50 sir001 FaxSend[884]: <-- [9:AT+FCQ=?\r] Jun 7 15:22:50 sir001 kernel: AT: 'AT+FCQ=?' Jun 7 15:22:50 sir001 kernel: isdn_tty: unknown token=>AT+FCQ=?< Jun 7 15:22:50 sir001 kernel: AT: 'AT+FAP=?' Jun 7 15:22:50 sir001 kernel: isdn_tty: FAP=? Jun 7 15:22:50 sir001 kernel: AT: 'AT+FSPL=?' Jun 7 15:22:50 sir001 kernel: isdn_tty: unknown token=>AT+FSPL=?< Jun 7 15:22:50 sir001 FaxSend[884]: --> [5:ERROR] Jun 7 15:22:50 sir001 FaxSend[884]: <-- [9:AT+FAP=?\r] Jun 7 15:22:50 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:50 sir001 FaxSend[884]: <-- [10:AT+FSPL=?\r] Jun 7 15:22:50 sir001 FaxSend[884]: --> [5:ERROR] Jun 7 15:22:50 sir001 FaxSend[884]: <-- [12:AT+FCLASS=2\r] Jun 7 15:22:50 sir001 kernel: AT: 'AT+FCLASS=2' Jun 7 15:22:50 sir001 kernel: isdn_tty: FCLASS=2 Jun 7 15:22:51 sir001 kernel: AT: 'AT+FTBC=0' Jun 7 15:22:51 sir001 kernel: isdn_tty: Fax FTBC=0 Jun 7 15:22:51 sir001 kernel: AT: 'AT+FBOR=0' Jun 7 15:22:51 sir001 kernel: isdn_tty: Fax FBOR=0 Jun 7 15:22:51 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:51 sir001 FaxSend[884]: <-- [10:AT+FTBC=0\r] Jun 7 15:22:51 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:51 sir001 FaxSend[884]: <-- [10:AT+FBOR=0\r] Jun 7 15:22:51 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:51 sir001 FaxSend[884]: <-- [13:AT+FPHCTO=30\r] Jun 7 15:22:51 sir001 kernel: AT: 'AT+FPHCTO=30' Jun 7 15:22:51 sir001 kernel: isdn_tty: FPHCTO=30 Jun 7 15:22:51 sir001 kernel: AT: 'AT+FDCC=1,5,2,2,1,0,0,0' Jun 7 15:22:51 sir001 kernel: isdn_tty: Fax Setup values=1,5,2,2,1,0,0,0 Jun 7 15:22:51 sir001 kernel: ttyI2 ioctl TCSETS Jun 7 15:22:51 sir001 kernel: ttyI2 ioctl TIOCMBIC Jun 7 15:22:51 sir001 kernel: Mhup in TIOCMBIC Jun 7 15:22:51 sir001 kernel: Mhup ttyI2 Jun 7 15:22:51 sir001 FaxSend[884]: --> [5:ERROR] Jun 7 15:22:51 sir001 FaxSend[884]: MODEM Command error Jun 7 15:22:51 sir001 FaxSend[884]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r] Jun 7 15:22:51 sir001 FaxSend[884]: --> [2:OK] Jun 7 15:22:51 sir001 FaxSend[884]: MODEM ISDNFAX AVM-B1/ Jun 7 15:22:51 sir001 FaxSend[884]: MODEM input buffering disabled Jun 7 15:22:51 sir001 FaxSend[884]: SEND FAX: JOB 402 DEST 06184901279 COMMID 00000091 Jun 7 15:22:54 sir001 kernel: ttyI2 ioctl TIOCMBIS Jun 7 15:22:54 sir001 kernel: Shutting down isdnmodem port 2 .... Jun 7 15:22:54 sir001 kernel: isdn_tty_close normal exit Jun 7 15:22:54 sir001 kernel: isdn_tty_open cui2, count = 0 Jun 7 15:22:54 sir001 kernel: starting up ttyi2 ... Jun 7 15:22:54 sir001 kernel: isdn_tty_open ttyi2 successful... Jun 7 15:22:54 sir001 kernel: isdn_tty_open normal exit Jun 7 15:22:54 sir001 kernel: ttyI2 ioctl TCSETS Jun 7 15:22:54 sir001 kernel: AT: 'ATE0V1Q0S0=0H0' Jun 7 15:22:54 sir001 kernel: AT: 'ATS8=2S7=60Q0Q0' Jun 7 15:22:54 sir001 kernel: AT: 'AT+FCLASS=2' Jun 7 15:22:54 sir001 kernel: isdn_tty: FCLASS=2 Jun 7 15:22:54 sir001 kernel: AT: 'AT+FTBC=0' Jun 7 15:22:54 sir001 kernel: isdn_tty: Fax FTBC=0 Jun 7 15:22:54 sir001 kernel: AT: 'AT+FBOR=0' Jun 7 15:22:54 sir001 kernel: isdn_tty: Fax FBOR=0 Jun 7 15:22:54 sir001 kernel: AT: 'AT+FPHCTO=30' Jun 7 15:22:54 sir001 kernel: isdn_tty: FPHCTO=30 Jun 7 15:22:54 sir001 kernel: AT: 'AT+FDCC=1,5,2,2,1,0,0,0' Jun 7 15:22:54 sir001 kernel: isdn_tty: Fax Setup values=1,5,2,2,1,0,0,0 Jun 7 15:22:54 sir001 kernel: ttyI2 ioctl TCSETS Jun 7 15:22:54 sir001 kernel: AT: 'AT+FCLASS=2' Jun 7 15:22:54 sir001 kernel: isdn_tty: FCLASS=2 Jun 7 15:22:54 sir001 kernel: AT: 'AT+FTBC=0' Jun 7 15:22:54 sir001 kernel: isdn_tty: Fax FTBC=0 Jun 7 15:22:54 sir001 kernel: AT: 'AT+FBOR=0' Jun 7 15:22:54 sir001 kernel: isdn_tty: Fax FBOR=0 Jun 7 15:22:54 sir001 kernel: AT: 'AT+FPHCTO=30' Jun 7 15:22:54 sir001 kernel: isdn_tty: FPHCTO=30 Jun 7 15:22:54 sir001 kernel: AT: 'AT+FDCC=1,5,2,2,1,0,0,0' Jun 7 15:22:54 sir001 kernel: isdn_tty: Fax Setup values=1,5,2,2,1,0,0,0 Jun 7 15:22:54 sir001 kernel: AT: 'AT+FLID="DIEHLGMBH&CO.KG"' Jun 7 15:22:54 sir001 kernel: isdn_tty: Fax sender=>DIEHLGMBH&CO.KG< Jun 7 15:22:54 sir001 kernel: AT: 'AT&F&E0D006184901279' Jun 7 15:23:04 sir001 kernel: capidrv-1: DISCONNECT_IND reason 0x34d8 (Incompatible destination) for plci 0x201 Jun 7 15:23:04 sir001 kernel: DHUP: 1 Jun 7 15:23:04 sir001 kernel: tty_STAT_DHUP ttyI2 Jun 7 15:23:04 sir001 kernel: Mhup in ISDN_STAT_DHUP Jun 7 15:23:04 sir001 kernel: Mhup ttyI2 Jun 7 15:23:04 sir001 kernel: CHANNELD HUP ttyI2: msn=0 partner=006184901279 si1=7 si2=0 Jun 7 15:23:04 sir001 kernel: AT: 'ATH0' Jun 7 15:23:04 sir001 FaxSend[884]: SEND FAILED: Busy signal detected Jun 7 15:23:04 sir001 FaxQueuer[266]: JOB 402 (active dest +496184901279 pri 122 tts 0:00 killtime 2:42:16): CMD DONE: exit status 0 Jun 7 15:23:04 sir001 FaxQueuer[266]: JOB 402 (sleeping dest +496184901279 pri 121 tts 0:00 killtime 2:42:16): SEND INCOMPLETE: requeue for 3:00; Busy signal detected Jun 7 15:23:04 sir001 FaxQueuer[266]: JOB 403 (active dest +4927382775 pri 123 tts 0:00 killtime 2:45:52): CMD START /usr/lib/fax/faxsend -m cui2 sendq/q403 (PID 888) Jun 7 15:23:04 sir001 kernel: ttyI2 ioctl TIOCMBIC Jun 7 15:23:04 sir001 kernel: Mhup in TIOCMBIC Jun 7 15:23:04 sir001 kernel: Mhup ttyI2 Jun 7 15:23:04 sir001 kernel: Shutting down isdnmodem port 2 .... Jun 7 15:23:04 sir001 kernel: isdn_tty_close normal exit Jun 7 15:23:04 sir001 kernel: isdn_tty_open cui2, count = 0 Jun 7 15:23:04 sir001 kernel: starting up ttyi2 ... Jun 7 15:23:04 sir001 kernel: isdn_tty_open ttyi2 successful... Jun 7 15:23:04 sir001 kernel: isdn_tty_open normal exit Jun 7 15:23:04 sir001 kernel: ttyI2 ioctl TIOCMBIC Jun 7 15:23:04 sir001 kernel: Mhup in TIOCMBIC Jun 7 15:23:04 sir001 kernel: Mhup ttyI2 Jun 7 15:23:04 sir001 FaxSend[888]: MODEM set DTR OFF Jun 7 15:23:04 sir001 FaxSend[888]: DELAY 2600 ms Jun 7 15:23:07 sir001 kernel: ttyI2 ioctl TIOCMBIS Jun 7 15:23:07 sir001 kernel: Shutting down isdnmodem port 2 .... Jun 7 15:23:07 sir001 kernel: isdn_tty_close normal exit Jun 7 15:23:07 sir001 kernel: isdn_tty_open cui2, count = 0 Jun 7 15:23:07 sir001 kernel: starting up ttyi2 ... Jun 7 15:23:07 sir001 kernel: isdn_tty_open ttyi2 successful... Jun 7 15:23:07 sir001 kernel: isdn_tty_open normal exit Jun 7 15:23:07 sir001 kernel: ttyI2 ioctl TCSETS Jun 7 15:23:07 sir001 kernel: AT: 'ATE0V1Q0S0=0H0' Jun 7 15:23:07 sir001 FaxSend[888]: MODEM set DTR ON Jun 7 15:23:07 sir001 FaxSend[888]: MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF Jun 7 15:23:07 sir001 FaxSend[888]: MODEM flush i/o Jun 7 15:23:07 sir001 FaxSend[888]: <-- [15:ATE0V1Q0S0=0H0\r] Jun 7 15:23:07 sir001 FaxSend[888]: --> [14:ATE0V1Q0S0=0H0] Jun 7 15:23:07 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:07 sir001 FaxSend[888]: <-- [16:ATS8=2S7=60q0q0\r] Jun 7 15:23:07 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:07 sir001 FaxSend[888]: <-- [12:AT+FCLASS=?\r] Jun 7 15:23:07 sir001 kernel: AT: 'ATS8=2S7=60Q0Q0' Jun 7 15:23:07 sir001 kernel: AT: 'AT+FCLASS=?' Jun 7 15:23:07 sir001 kernel: isdn_tty: FCLASS=? Jun 7 15:23:07 sir001 kernel: AT: 'AT+FCLASS=2' Jun 7 15:23:07 sir001 kernel: isdn_tty: FCLASS=2 Jun 7 15:23:07 sir001 kernel: AT: 'AT+FMFR?' Jun 7 15:23:07 sir001 kernel: isdn_tty: FMFR? Jun 7 15:23:07 sir001 FaxSend[888]: --> [5:0,2,8] Jun 7 15:23:07 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:07 sir001 FaxSend[888]: <-- [12:AT+FCLASS=2\r] Jun 7 15:23:07 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:07 sir001 FaxSend[888]: <-- [9:AT+FMFR?\r] Jun 7 15:23:08 sir001 FaxSend[888]: --> [7:ISDNfax] Jun 7 15:23:08 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:08 sir001 FaxSend[888]: <-- [9:AT+FMDL?\r] Jun 7 15:23:08 sir001 kernel: AT: 'AT+FMDL?' Jun 7 15:23:08 sir001 kernel: isdn_tty: FMDL? Jun 7 15:23:08 sir001 kernel: AT: 'AT+FREV?' Jun 7 15:23:08 sir001 kernel: isdn_tty: unknown token=>AT+FREV?< Jun 7 15:23:08 sir001 kernel: AT: 'AT+FDCC=?' Jun 7 15:23:08 sir001 FaxSend[888]: --> [6:AVM-B1] Jun 7 15:23:08 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:08 sir001 FaxSend[888]: <-- [9:AT+FREV?\r] Jun 7 15:23:08 sir001 FaxSend[888]: --> [5:ERROR] Jun 7 15:23:08 sir001 FaxSend[888]: <-- [10:AT+FDCC=?\r] Jun 7 15:23:08 sir001 FaxSend[888]: --> [43:(0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)] Jun 7 15:23:08 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:08 sir001 FaxSend[888]: <-- [9:AT+FCQ=?\r] Jun 7 15:23:08 sir001 kernel: AT: 'AT+FCQ=?' Jun 7 15:23:08 sir001 kernel: isdn_tty: unknown token=>AT+FCQ=?< Jun 7 15:23:08 sir001 kernel: AT: 'AT+FAP=?' Jun 7 15:23:08 sir001 kernel: isdn_tty: FAP=? Jun 7 15:23:08 sir001 kernel: AT: 'AT+FSPL=?' Jun 7 15:23:08 sir001 kernel: isdn_tty: unknown token=>AT+FSPL=?< Jun 7 15:23:08 sir001 FaxSend[888]: --> [5:ERROR] Jun 7 15:23:08 sir001 FaxSend[888]: <-- [9:AT+FAP=?\r] Jun 7 15:23:08 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:08 sir001 FaxSend[888]: <-- [10:AT+FSPL=?\r] Jun 7 15:23:08 sir001 FaxSend[888]: --> [5:ERROR] Jun 7 15:23:08 sir001 FaxSend[888]: <-- [12:AT+FCLASS=2\r] Jun 7 15:23:08 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:08 sir001 FaxSend[888]: <-- [10:AT+FTBC=0\r] Jun 7 15:23:08 sir001 kernel: AT: 'AT+FCLASS=2' Jun 7 15:23:08 sir001 kernel: isdn_tty: FCLASS=2 Jun 7 15:23:08 sir001 kernel: AT: 'AT+FTBC=0' Jun 7 15:23:08 sir001 kernel: isdn_tty: Fax FTBC=0 Jun 7 15:23:08 sir001 kernel: AT: 'AT+FBOR=0' Jun 7 15:23:08 sir001 kernel: isdn_tty: Fax FBOR=0 Jun 7 15:23:08 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:08 sir001 FaxSend[888]: <-- [10:AT+FBOR=0\r] Jun 7 15:23:09 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:09 sir001 FaxSend[888]: <-- [13:AT+FPHCTO=30\r] Jun 7 15:23:09 sir001 FaxSend[888]: --> [5:ERROR] Jun 7 15:23:09 sir001 FaxSend[888]: MODEM Command error Jun 7 15:23:09 sir001 FaxSend[888]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r] Jun 7 15:23:09 sir001 kernel: AT: 'AT+FPHCTO=30' Jun 7 15:23:09 sir001 kernel: isdn_tty: FPHCTO=30 Jun 7 15:23:09 sir001 kernel: AT: 'AT+FDCC=1,5,2,2,1,0,0,0' Jun 7 15:23:09 sir001 kernel: isdn_tty: Fax Setup values=1,5,2,2,1,0,0,0 Jun 7 15:23:09 sir001 kernel: ttyI2 ioctl TCSETS Jun 7 15:23:09 sir001 kernel: ttyI2 ioctl TIOCMBIC Jun 7 15:23:09 sir001 kernel: Mhup in TIOCMBIC Jun 7 15:23:09 sir001 kernel: Mhup ttyI2 Jun 7 15:23:09 sir001 FaxSend[888]: --> [2:OK] Jun 7 15:23:09 sir001 FaxSend[888]: MODEM ISDNFAX AVM-B1/ Jun 7 15:23:09 sir001 FaxSend[888]: MODEM input buffering disabled Jun 7 15:23:09 sir001 FaxSend[888]: SEND FAX: JOB 403 DEST 027382775 COMMID 00000092 Jun 7 15:23:11 sir001 kernel: ttyI2 ioctl TIOCMBIS Jun 7 15:23:11 sir001 kernel: Shutting down isdnmodem port 2 .... Jun 7 15:23:11 sir001 kernel: isdn_tty_close normal exit Jun 7 15:23:11 sir001 kernel: isdn_tty_open cui2, count = 0 Jun 7 15:23:11 sir001 kernel: starting up ttyi2 ... Jun 7 15:23:11 sir001 kernel: isdn_tty_open ttyi2 successful... Jun 7 15:23:11 sir001 kernel: isdn_tty_open normal exit Jun 7 15:23:11 sir001 kernel: ttyI2 ioctl TCSETS Jun 7 15:23:11 sir001 kernel: AT: 'ATE0V1Q0S0=0H0' Jun 7 15:23:11 sir001 kernel: AT: 'ATS8=2S7=60Q0Q0' Jun 7 15:23:11 sir001 kernel: AT: 'AT+FCLASS=2' Jun 7 15:23:11 sir001 kernel: isdn_tty: FCLASS=2 Jun 7 15:23:11 sir001 kernel: AT: 'AT+FTBC=0' Jun 7 15:23:11 sir001 kernel: isdn_tty: Fax FTBC=0 Jun 7 15:23:11 sir001 kernel: AT: 'AT+FBOR=0' Jun 7 15:23:11 sir001 kernel: isdn_tty: Fax FBOR=0 Jun 7 15:23:11 sir001 kernel: AT: 'AT+FPHCTO=30' Jun 7 15:23:11 sir001 kernel: isdn_tty: FPHCTO=30 Jun 7 15:23:11 sir001 kernel: AT: 'AT+FDCC=1,5,2,2,1,0,0,0' Jun 7 15:23:11 sir001 kernel: isdn_tty: Fax Setup values=1,5,2,2,1,0,0,0 Jun 7 15:23:12 sir001 kernel: ttyI2 ioctl TCSETS Jun 7 15:23:12 sir001 kernel: AT: 'AT+FCLASS=2' Jun 7 15:23:12 sir001 kernel: isdn_tty: FCLASS=2 Jun 7 15:23:12 sir001 kernel: AT: 'AT+FTBC=0' Jun 7 15:23:12 sir001 kernel: isdn_tty: Fax FTBC=0 Jun 7 15:23:12 sir001 kernel: AT: 'AT+FBOR=0' Jun 7 15:23:12 sir001 kernel: isdn_tty: Fax FBOR=0 Jun 7 15:23:12 sir001 kernel: AT: 'AT+FPHCTO=30' Jun 7 15:23:12 sir001 kernel: isdn_tty: FPHCTO=30 Jun 7 15:23:12 sir001 kernel: AT: 'AT+FDCC=1,5,2,2,1,0,0,0' Jun 7 15:23:12 sir001 kernel: isdn_tty: Fax Setup values=1,5,2,2,1,0,0,0 Jun 7 15:23:12 sir001 kernel: AT: 'AT+FLID="DIEHLGMBH&CO.KG"' Jun 7 15:23:12 sir001 kernel: isdn_tty: Fax sender=>DIEHLGMBH&CO.KG< Jun 7 15:23:12 sir001 kernel: AT: 'AT&F&E0D0027382775' Jun 7 15:23:21 sir001 kernel: capidrv-1: DISCONNECT_IND reason 0x34d8 (Incompatible destination) for plci 0x201 Jun 7 15:23:21 sir001 kernel: DHUP: 1 Jun 7 15:23:21 sir001 kernel: tty_STAT_DHUP ttyI2 Jun 7 15:23:21 sir001 kernel: Mhup in ISDN_STAT_DHUP Jun 7 15:23:21 sir001 kernel: Mhup ttyI2 Jun 7 15:23:21 sir001 kernel: CHANNELD HUP ttyI2: msn=0 partner=0027382775 si1=7 si2=0 Jun 7 15:23:21 sir001 kernel: AT: 'ATH0' Jun 7 15:23:21 sir001 FaxSend[888]: SEND FAILED: Busy signal detected Jun 7 15:23:21 sir001 FaxQueuer[266]: JOB 403 (active dest +4927382775 pri 123 tts 0:00 killtime 2:45:35): CMD DONE: exit status 0 Jun 7 15:23:21 sir001 FaxQueuer[266]: JOB 403 (sleeping dest +4927382775 pri 122 tts 0:00 killtime 2:45:35): SEND INCOMPLETE: requeue for 3:00; Busy signal detected Jun 7 15:23:21 sir001 kernel: ttyI2 ioctl TIOCMBIC Jun 7 15:23:21 sir001 kernel: Mhup in TIOCMBIC Jun 7 15:23:21 sir001 kernel: Mhup ttyI2 Jun 7 15:23:21 sir001 kernel: Shutting down isdnmodem port 2 .... Jun 7 15:23:21 sir001 kernel: isdn_tty_close normal exit
- Follow-Ups:
- Re: Hylafax with AVM-B1 PCI ISDN: Problems
- From: David Woolley <david@djwhome.demon.co.uk>
- Re: Hylafax with AVM-B1 PCI ISDN: Problems
- From: Holger Raschke <Holger.Raschke@FernUni-Hagen.de>
- Re: Hylafax with AVM-B1 PCI ISDN: Problems
- Prev by Date: Re: Xferlog File
- Next by Date: Re: any chance for using ISDN ?
- Prev by thread: Re: E-signatures / approval before sending.
- Next by thread: Re: Hylafax with AVM-B1 PCI ISDN: Problems
- Index(es):
Project hosted by iFAX Solutions