HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Hylafax with AVM-B1 PCI ISDN: Problems



Dear Kai,

I'm not familiar with the kind of ISDN-device you use.
In general, HylaFax does _not_ support fax-protocols over ISDN-devices.
What you might need, is a special CAPI-driver, that supports modem
emulation. The problem was discussed earlier. Watch the mail archives.

Hope this helps.
Holger

Kai Havel wrote:
> =

> Dear Gentlemen,
> I=B4m trying to use your  Hylafax-Faxserver on my AVM-B1 PCI ISDN - car=
d,
> placed in
> a running Linux system. The ISDN device works just fine on ppp
> connections to my provider.
> The configurations and addons for the AVM-B1 card are already done.
> Never the less,
> each time, I try to send a faximile, the receivant seems to be buisy.
> Now my question: Couldit be, that the ISDN Card is still tryes to send
> to "Isdn-Fax-Machines"
> instead of ordinary faxmodems, and each time it connects to an analog
> faxmaschine it fails?
> =

> To get an idea, what makes me think so, I attach a part of the
> messages-file to this mail.
> =

> I would be very thankfull for a hint or idea, to solve my problem.
> Thank you in advance,
> =

>     Kai Havel
> =

> --
> ----------------------------------------------------------
> --- Kai Havel   *  (K-IS)
> --- Am Knuss 13  *  63505 Langenselbold
> --- Tel.: 06184/902167  *  Fax : 06184 / 901279
> --- mailto:kah@k-is.de *  Internet : http://www.k-is.de
> ----------------------------------------------------------




Project hosted by iFAX Solutions