flexfax: HylaFAX sends empty page after cover ...

["Heribert Steuer" <herste@privat.toplink.de>]

Hi there ...

im running HylaFAX 4.0pl2 on LiNUX i386 kernel 2.0.36
and ELSA Microlink 33.6TQV.
Faxing works fine (after hours of fixing modem setup problems ... damn S=
130 ;) )
but after i created an own cover page and setting hylafax up to send it =

there is an empty page beeing sent after the cover page.
I cant find the problem myself.
I created the cover using TGIF ...

heres an example log of a sendq ...   

tts:924548677
killtime:924559276
retrytime:0
state:3
npages:0
totpages:3
ntries:0
ndials:1
totdials:1

it says "totpages:3" ... page 2 is the empty page ...

heres a sendlog ...

Apr 19 18:26:05.67: [  890]: SESSION BEGIN 00000050 XXXXXXXXXXXXX
Apr 19 18:26:05.67: [  890]: SEND FAX: JOB 50 DEST XXXXXXXXXXXXX COMMID =
00000050
Apr 19 18:26:05.67: [  890]: DELAY 2600 ms
Apr 19 18:26:08.28: [  890]: <-- [17:ATX3E0V1Q0S0=3D0H0\r]
Apr 19 18:26:08.30: [  890]: --> [2:OK]
Apr 19 18:26:08.30: [  890]: <-- [21:ATS8=3D2S7=3D60\Q4&D2&C1\r]
Apr 19 18:26:08.32: [  890]: --> [2:OK]
Apr 19 18:26:08.32: [  890]: <-- [14:AT+FCLASS=3D2.0\r]
Apr 19 18:26:08.34: [  890]: --> [2:OK]
Apr 19 18:26:08.34: [  890]: <-- [9:AT+FLO=3D1\r]
Apr 19 18:26:08.36: [  890]: --> [2:OK]
Apr 19 18:26:08.36: [  890]: <-- [9:AT+FPP=3D0\r]
Apr 19 18:26:08.38: [  890]: --> [2:OK]
Apr 19 18:26:08.38: [  890]: <-- [9:AT+FBO=3D0\r]
Apr 19 18:26:08.40: [  890]: --> [2:OK]
Apr 19 18:26:08.40: [  890]: <-- [10:AT+FCT=3D30\r]
Apr 19 18:26:08.42: [  890]: --> [2:OK]
Apr 19 18:26:08.42: [  890]: <-- [15:AT+FNR=3D1,1,1,1\r]
Apr 19 18:26:08.44: [  890]: --> [2:OK]
Apr 19 18:26:08.44: [  890]: <-- [9:AT+FIE=3D0\r]
Apr 19 18:26:08.46: [  890]: --> [2:OK]
Apr 19 18:26:08.46: [  890]: <-- [23:AT+FCC=3D1,5,2,2,0,0,0,0\r]
Apr 19 18:26:08.48: [  890]: --> [2:OK]
Apr 19 18:26:08.48: [  890]: <-- [7:ATL3M1\r]
Apr 19 18:26:08.49: [  890]: --> [2:OK]
Apr 19 18:26:08.49: [  890]: <-- [14:AT+FCLASS=3D2.0\r]
Apr 19 18:26:08.61: [  890]: --> [2:OK]
Apr 19 18:26:08.61: [  890]: <-- [9:AT+FLO=3D1\r]
Apr 19 18:26:08.73: [  890]: --> [2:OK]
Apr 19 18:26:08.73: [  890]: <-- [9:AT+FPP=3D0\r]
Apr 19 18:26:08.85: [  890]: --> [2:OK]
Apr 19 18:26:08.85: [  890]: <-- [9:AT+FBO=3D0\r]
Apr 19 18:26:08.97: [  890]: --> [2:OK]
Apr 19 18:26:08.97: [  890]: <-- [10:AT+FCT=3D30\r]
Apr 19 18:26:09.09: [  890]: --> [2:OK]
Apr 19 18:26:09.09: [  890]: <-- [15:AT+FNR=3D1,1,1,1\r]
Apr 19 18:26:09.21: [  890]: --> [2:OK]
Apr 19 18:26:09.21: [  890]: <-- [9:AT+FIE=3D0\r]
Apr 19 18:26:09.33: [  890]: --> [2:OK]
Apr 19 18:26:09.33: [  890]: <-- [23:AT+FCC=3D1,5,2,2,0,0,0,0\r]
Apr 19 18:26:09.45: [  890]: --> [2:OK]
Apr 19 18:26:09.45: [  890]: <-- [30:AT+FLI=3D"Crossfade Rental Ser"\r]
Apr 19 18:26:09.58: [  890]: --> [2:OK]
Apr 19 18:26:09.58: [  890]: DIAL XXXXXXXXXXXXX
Apr 19 18:26:09.58: [  890]: <-- [18:ATDTXXXXXXXXXXXXX\r]
Apr 19 18:26:30.48: [  890]: --> [4:+FCO]
Apr 19 18:26:33.14: [  890]: --> [74:+FNF: 58 00 99 1C 1C 9C 1C 4C CC 0C=
 8C 04 04 04 04 04 04 04 04 04 04 04 04]
Apr 19 18:26:33.14: [  890]: REMOTE NSF " 58 00 99 1C 1C 9C 1C 4C CC 0C =
8C 04 04 04 04 04 04 04 04 04 04 04 04"
Apr 19 18:26:33.14: [  890]: --> [37:+FCI:"T-D1 Mobilbox       =98=98=98=
=98=98=98=98=98=98=98"]
Apr 19 18:26:33.14: [  890]: REMOTE CSI "T-D1 Mobilbox       =98=98=98=98=
=98=98=98=98=98=98"
Apr 19 18:26:33.26: [  890]: --> [20:+FIS:1,3,0,2,1,0,0,0]
Apr 19 18:26:33.26: [  890]: --> [2:OK]
Apr 19 18:26:33.26: [  890]: REMOTE best rate 9600 bit/s
Apr 19 18:26:33.26: [  890]: REMOTE max page width 1728 pixels in 215 mm=

Apr 19 18:26:33.26: [  890]: REMOTE max unlimited page length 
Apr 19 18:26:33.26: [  890]: REMOTE best vres 7.7 line/mm
Apr 19 18:26:33.26: [  890]: REMOTE best format 2-D MR
Apr 19 18:26:33.26: [  890]: REMOTE best 0 ms/scanline
Apr 19 18:26:33.26: [  890]: USE 9600 bit/s
Apr 19 18:26:33.26: [  890]: USE 0 ms/scanline
Apr 19 18:26:33.26: [  890]: SEND file "docq/doc50.cover;01"
Apr 19 18:26:33.26: [  890]: USE page width 1728 pixels in 215 mm
Apr 19 18:26:33.26: [  890]: USE unlimited page length 
Apr 19 18:26:33.26: [  890]: USE 7.7 line/mm
Apr 19 18:26:33.26: [  890]: USE 1-D MR
Apr 19 18:26:33.26: [  890]: <-- [23:AT+FIS=3D1,3,0,2,0,0,0,0\r]
Apr 19 18:26:33.39: [  890]: --> [2:OK]
Apr 19 18:26:33.39: [  890]: <-- [7:AT+FDT\r]
Apr 19 18:26:39.44: [  890]: --> [20:+FCS:1,3,0,2,0,0,0,0]
Apr 19 18:26:39.75: [  890]: --> [7:CONNECT]
Apr 19 18:26:39.75: [  890]: SEND begin page
Apr 19 18:26:39.76: [  890]: <-- data [1026]
Apr 19 18:26:39.76: [  890]: <-- data [1026]
Apr 19 18:26:39.76: [  890]: <-- data [1027]
Apr 19 18:26:39.76: [  890]: <-- data [1025]
Apr 19 18:26:39.76: [  890]: <-- data [1028]
Apr 19 18:26:40.88: [  890]: <-- data [1027]
Apr 19 18:26:42.09: [  890]: <-- data [1037]
Apr 19 18:26:42.70: [  890]: <-- data [1024]
Apr 19 18:26:43.30: [  890]: <-- data [1024]
Apr 19 18:26:44.55: [  890]: <-- data [1036]
Apr 19 18:26:45.16: [  890]: <-- data [1028]
Apr 19 18:26:46.39: [  890]: <-- data [1027]
Apr 19 18:26:46.97: [  890]: <-- data [1026]
Apr 19 18:26:48.11: [  890]: <-- data [1028]
Apr 19 18:26:48.73: [  890]: <-- data [1024]
Apr 19 18:26:49.29: [  890]: <-- data [1026]
Apr 19 18:26:50.63: [  890]: <-- data [1024]
Apr 19 18:26:51.22: [  890]: <-- data [1025]
Apr 19 18:26:51.85: [  890]: <-- data [1033]
Apr 19 18:26:53.16: [  890]: <-- data [1032]
Apr 19 18:26:53.81: [  890]: <-- data [1027]
Apr 19 18:26:54.36: [  890]: <-- data [1026]
Apr 19 18:26:55.72: [  890]: <-- data [1024]
Apr 19 18:26:56.32: [  890]: <-- data [1024]
Apr 19 18:26:56.91: [  890]: <-- data [1027]
Apr 19 18:26:58.12: [  890]: <-- data [1026]
Apr 19 18:26:58.72: [  890]: <-- data [1028]
Apr 19 18:26:59.97: [  890]: <-- data [1025]
Apr 19 18:27:00.58: [  890]: <-- data [588]
Apr 19 18:27:01.19: [  890]: SENT 29260 bytes of data
Apr 19 18:27:01.19: [  890]: SEND 1D RTC
Apr 19 18:27:01.19: [  890]: <-- data [9]
Apr 19 18:27:03.98: [  890]: SEND end page
Apr 19 18:27:03.98: [  890]: SEND send MPS (more pages, same document)
Apr 19 18:27:03.98: [  890]: <-- data [2]
Apr 19 18:27:08.20: [  890]: --> [2:OK]
Apr 19 18:27:08.20: [  890]: SEND recv MCF (message confirmation)
Apr 19 18:27:08.20: [  890]: SEND FAX (00000050): FROM herste@privat.top=
link.de TO XXXXXXXXXXXXX (page 1 of 3 sent in 0:35)
Apr 19 18:27:08.20: [  890]: USE page width 1728 pixels in 215 mm
Apr 19 18:27:08.20: [  890]: USE unlimited page length 
Apr 19 18:27:08.20: [  890]: USE 7.7 line/mm
Apr 19 18:27:08.20: [  890]: USE 1-D MR
Apr 19 18:27:08.20: [  890]: <-- [7:AT+FDT\r]
Apr 19 18:27:08.63: [  890]: --> [7:CONNECT]
Apr 19 18:27:08.63: [  890]: SEND begin page
Apr 19 18:27:08.63: [  890]: <-- data [1027]
Apr 19 18:27:08.63: [  890]: <-- data [1024]
Apr 19 18:27:08.63: [  890]: <-- data [81]
Apr 19 18:27:08.63: [  890]: SENT 2129 bytes of data
Apr 19 18:27:08.63: [  890]: SEND 1D RTC
Apr 19 18:27:08.63: [  890]: <-- data [9]
Apr 19 18:27:10.44: [  890]: SEND end page
Apr 19 18:27:10.44: [  890]: SEND send MPS (more pages, same document)
Apr 19 18:27:10.44: [  890]: <-- data [2]
Apr 19 18:27:14.44: [  890]: --> [2:OK]
Apr 19 18:27:14.44: [  890]: SEND recv MCF (message confirmation)
Apr 19 18:27:14.44: [  890]: SEND FAX (00000050): FROM XXXXXXXXXXXXX TO =
XXXXXXXXXXXXX (page 2 of 3 sent in 0:06)
Apr 19 18:27:14.44: [  890]: SEND FAX (00000050): FROM XXXXXXXXXXXXX TO =
XXXXXXXXXXXXX (docq/doc50.cover;01 sent in 0:41)
Apr 19 18:27:14.44: [  890]: SEND file "docq/doc92.ps;01"
Apr 19 18:27:14.44: [  890]: USE page width 1728 pixels in 215 mm
Apr 19 18:27:14.44: [  890]: USE unlimited page length 
Apr 19 18:27:14.44: [  890]: USE 7.7 line/mm
Apr 19 18:27:14.44: [  890]: USE 1-D MR
Apr 19 18:27:14.44: [  890]: <-- [7:AT+FDT\r]
Apr 19 18:27:14.87: [  890]: --> [7:CONNECT]
Apr 19 18:27:14.87: [  890]: SEND begin page
Apr 19 18:27:14.87: [  890]: <-- data [1027]
Apr 19 18:27:14.87: [  890]: <-- data [1024]
Apr 19 18:27:14.87: [  890]: <-- data [1031]
Apr 19 18:27:14.87: [  890]: <-- data [1028]
Apr 19 18:27:14.87: [  890]: <-- data [1028]
Apr 19 18:27:16.06: [  890]: <-- data [1028]
Apr 19 18:27:17.23: [  890]: <-- data [1029]
Apr 19 18:27:17.85: [  890]: <-- data [1028]
Apr 19 18:27:18.42: [  890]: <-- data [1029]
Apr 19 18:27:19.58: [  890]: <-- data [1026]
Apr 19 18:27:20.10: [  890]: <-- data [1027]
Apr 19 18:27:21.15: [  890]: <-- data [1034]
Apr 19 18:27:22.38: [  890]: <-- data [1027]
Apr 19 18:27:22.94: [  890]: <-- data [1032]
Apr 19 18:27:23.52: [  890]: <-- data [1025]
Apr 19 18:27:24.60: [  890]: <-- data [1030]
Apr 19 18:27:25.21: [  890]: <-- data [1027]
Apr 19 18:27:26.45: [  890]: <-- data [1024]
Apr 19 18:27:27.02: [  890]: <-- data [1026]
Apr 19 18:27:28.16: [  890]: <-- data [1032]
Apr 19 18:27:28.71: [  890]: <-- data [1031]
Apr 19 18:27:29.91: [  890]: <-- data [1025]
Apr 19 18:27:30.52: [  890]: <-- data [1024]
Apr 19 18:27:31.74: [  890]: <-- data [1024]
Apr 19 18:27:32.34: [  890]: <-- data [1024]
Apr 19 18:27:32.92: [  890]: <-- data [1024]
Apr 19 18:27:34.09: [  890]: <-- data [1024]
Apr 19 18:27:34.71: [  890]: <-- data [1024]
Apr 19 18:27:35.93: [  890]: <-- data [565]
Apr 19 18:27:35.93: [  890]: SENT 29237 bytes of data
Apr 19 18:27:35.93: [  890]: SEND 1D RTC
Apr 19 18:27:35.93: [  890]: <-- data [9]
Apr 19 18:27:39.18: [  890]: SEND end page
Apr 19 18:27:39.19: [  890]: SEND send EOP (no more pages or documents)
Apr 19 18:27:39.19: [  890]: <-- data [2]
Apr 19 18:27:44.52: [  890]: --> [7:+FHS:00]
Apr 19 18:27:44.52: [  890]: REMOTE HANGUP: Normal and proper end of con=
nection (code 0)
Apr 19 18:27:44.52: [  890]: SEND recv MCF (message confirmation)
Apr 19 18:27:44.52: [  890]: SEND FAX (00000050): FROM XXXXXXXXXXXXX TO =
XXXXXXXXXXXXX (page 3 of 3 sent in 0:30)
Apr 19 18:27:44.52: [  890]: SEND FAX (00000050): FROM XXXXXXXXXXXXX TO =
XXXXXXXXXXXXX (docq/doc92.ps;01 sent in 0:30)
Apr 19 18:27:44.52: [  890]: <-- [5:ATH0\r]
Apr 19 18:27:45.78: [  890]: --> [2:OK]
Apr 19 18:27:45.78: [  890]: SESSION END


maybe someone can help ....

thanks alot


Dipl.-Ing. Heribert Steuer
Crossfade Rental Service GmbH