flexfax: Missing EOL after 5 seconds

["Horst Simon" <hsimon@vic.bigpond.net.au>]

This is a follow-up on my first message having Phase B errors. After
changing
the baud rate to 19.2k and enabling XON/XOFF, I am getting now missing EOL
after
5 seconds errors.

Sending faxes works ok, only receive fails.

Anyone has seen this error and could fix it? Any suggestions appreciated.

Thanks and Regards,
Horst Simon

Mar 04 09:21:18.66: [  327]: SESSION BEGIN 00000021 610395531624
Mar 04 09:21:18.66: [  327]: <-- [4:ATA\r]
Mar 04 09:21:29.60: [  327]: --> [5:+FCON]
Mar 04 09:21:29.60: [  327]: ANSWER: FAX CONNECTION
Mar 04 09:21:29.61: [  327]: RECV FAX: begin
Mar 04 09:21:29.90: [  327]: --> [28:+FTSI:"+613 9553-1624      "]
Mar 04 09:21:29.90: [  327]: REMOTE TSI "+613 9553-1624"
Mar 04 09:21:32.01: [  327]: --> [21:+FDCS:1,3,0,2,0,0,0,3]
Mar 04 09:21:32.01: [  327]: REMOTE wants 9600 bit/s
Mar 04 09:21:32.01: [  327]: REMOTE wants page width 1728 pixels in 215 mm
Mar 04 09:21:32.01: [  327]: REMOTE wants unlimited page length
Mar 04 09:21:32.01: [  327]: REMOTE wants 7.7 line/mm
Mar 04 09:21:32.01: [  327]: REMOTE wants 1-D MR
Mar 04 09:21:32.02: [  327]: --> [2:OK]
Mar 04 09:21:32.02: [  327]: <-- [7:AT+FDR\r]
Mar 04 09:21:33.51: [  327]: --> [5:+FCFR]
Mar 04 09:21:34.19: [  327]: --> [7:CONNECT]
Mar 04 09:21:34.19: [  327]: RECV: begin page
Mar 04 09:21:34.19: [  327]: RECV: send trigger 021
Mar 04 09:21:34.19: [  327]: <-- data [1]
Mar 04 09:23:00.92: [  327]: <-- data [1]
Mar 04 09:23:00.92: [  327]: RECV: Missing EOL after 5 seconds
Mar 04 09:23:00.92: [  327]: REMOTE HANGUP: Missing EOL after 5 seconds
(section 3.2/T.4) (code 91)
Mar 04 09:23:00.99: [  327]: RECV FAX (00000021): recvq/fax00010.tif from
+613 9553-1624, route to <unspecified>, 0 pages in 1:31
Mar 04 09:23:01.02: [  327]: RECV FAX: Missing EOL after 5 seconds (section
3.2/T.4)
Mar 04 09:23:01.02: [  327]: <-- [6:AT+FK\r]
Mar 04 09:23:01.19: [  327]: --> [2:OK]
Mar 04 09:23:01.19: [  327]: RECV FAX (00000021): session with +613
9553-1624 terminated abnormally: Missing EOL after 5 seconds (section
3.2/T.4)
Mar 04 09:23:01.19: [  327]: RECV FAX: bin/faxrcvd "recvq/fax00010.tif"
"cua0" "00000021" "Missing EOL after 5 seconds (section 3.2/T.4)"
Mar 04 09:23:03.52: [  327]: RECV FAX: end
Mar 04 09:23:03.52: [  327]: SESSION END



===============================
|   Horst Simon               |
|   9 Stonehaven Crescent     |
|   Moorabbin, Vic, 3189      |
|   Australia                 |
|   hsimon@vic.bigpond.net.au |
===============================