Re: flexfax: SuSE confusion

[Carsten Hoeger <choeger@suse.de>]

On Sun, Jan 24, Donald G. Knecht wrote:

> think i have read everything there is....i setup exactly as in suse
> directions .....
> hylafax v4.0p12-17, modem is Boca v.34 (faxaddmodem reports as class1)
> have tried to use AdaptiveAnswer with AnswerRotary and the best result
> i've gotten so far is : ANSWER: Ring detected without succesful
> handshake.
> :SESSION END

Please take a look at the original-hylafax-documentation, too.

http://www.hylafax.org/setup-advanced.php#AdaptiveAnswer

[...]

Adaptive Answer Support

Adaptive answer is the ability for a modem to determine whether an incoming
phone call is for data, fax, or voice use. If a modem supports a good
adaptive-answering facility then it should be enabled with the
ModemSetupAACmd and HylaFAX will service fax, data, or voice calls as
identified by the modem and specified in the modem configuration files.
For example, 

      ModemSetupAACmd: AT+FAA=1

[...]

(You can also find it at /usr/doc/packages/hylafax/html)

-- 
mfG,
	Carsten Hoeger

+-----------------------------------------------------------+
| Carsten Hoeger                   SuSE GmbH                |
| choeger@suse.de                  Schanzaeckerstr. 10      |
| http://www.suse.de               90443 Nuernberg, Germany |
+-----------------------------------------------------------+