flexfax: HELP! What does "No response to MPS" mean???

[shui@pointsnorth.com]

Dear all,

I've been working fine with my hylafax v4.0pl1.  However, this morning I
encountered a problem in sending
faxes and the faxstat returned me the error tat "No response to MPS" and
the job was requeued for retry.
>From the log, all the handshaking was done and the first page was faxed.
However, the problem came
when the second page was to be sent.  It'd be greatly appreciated if
someone can point out what's the
problem.  I recalled that a lot of people mentioned about this type of
error in this list and what's the
work around?

Attached below please find a copy of the log.  I need to solve this problem
badly.  Any help will be greatly
greatly appreciated.

Thank you all for your kind attention!

Sandie

LOG follows here:
==============

Dec 08 11:22:31.54: [25208]: SESSION BEGIN 00000583 14165551111
Dec 08 11:22:31.54: [25208]: SEND FAX: JOB 33 DEST 5551111 COMMID 00000583
Dec 08 11:22:31.54: [25208]: DELAY 2600 ms
Dec 08 11:22:34.14: [25208]: <-- [17:ATE0V1Q0X4S0=0H0\r]
Dec 08 11:22:34.32: [25208]: --> [16:ATE0V1Q0X4S0=0H0]
Dec 08 11:22:34.32: [25208]: --> [2:OK]
Dec 08 11:22:34.32: [25208]: <-- [32:ATS8=2S7=60&H1&I0&R2S13=1&D2&C1\r]
Dec 08 11:22:34.50: [25208]: --> [2:OK]
Dec 08 11:22:34.50: [25208]: <-- [14:AT+FCLASS=2.0\r]
Dec 08 11:22:34.68: [25208]: --> [2:OK]
Dec 08 11:22:34.68: [25208]: <-- [9:AT+FLO=2\r]
Dec 08 11:22:34.86: [25208]: --> [2:OK]
Dec 08 11:22:34.86: [25208]: <-- [9:AT+FPP=0\r]
Dec 08 11:22:35.04: [25208]: --> [2:OK]
Dec 08 11:22:35.04: [25208]: <-- [9:AT+FBO=0\r]
Dec 08 11:22:35.24: [25208]: --> [2:OK]
Dec 08 11:22:35.24: [25208]: <-- [10:AT+FCT=30\r]
Dec 08 11:22:35.46: [25208]: --> [2:OK]
Dec 08 11:22:35.46: [25208]: <-- [15:AT+FNR=1,1,1,0\r]
Dec 08 11:22:35.64: [25208]: --> [2:OK]
Dec 08 11:22:35.64: [25208]: <-- [9:AT+FIE=0\r]
Dec 08 11:22:35.82: [25208]: --> [2:OK]
Dec 08 11:22:35.82: [25208]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Dec 08 11:22:36.00: [25208]: --> [2:OK]
Dec 08 11:22:36.00: [25208]: <-- [5:ATM0\r]
Dec 08 11:22:36.18: [25208]: --> [2:OK]
Dec 08 11:22:36.20: [25208]: <-- [14:AT+FCLASS=2.0\r]
Dec 08 11:22:36.46: [25208]: --> [2:OK]
Dec 08 11:22:36.46: [25208]: <-- [9:AT+FLO=2\r]
Dec 08 11:22:36.74: [25208]: --> [2:OK]
Dec 08 11:22:36.74: [25208]: <-- [9:AT+FPP=0\r]
Dec 08 11:22:37.02: [25208]: --> [2:OK]
Dec 08 11:22:37.02: [25208]: <-- [9:AT+FBO=0\r]
Dec 08 11:22:37.30: [25208]: --> [2:OK]
Dec 08 11:22:37.30: [25208]: <-- [10:AT+FCT=30\r]
Dec 08 11:22:37.58: [25208]: --> [2:OK]
Dec 08 11:22:37.58: [25208]: <-- [15:AT+FNR=1,1,1,0\r]
Dec 08 11:22:37.86: [25208]: --> [2:OK]
Dec 08 11:22:37.86: [25208]: <-- [9:AT+FIE=0\r]
Dec 08 11:22:38.14: [25208]: --> [2:OK]
Dec 08 11:22:38.14: [25208]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Dec 08 11:22:38.42: [25208]: --> [2:OK]
Dec 08 11:22:38.42: [25208]: <-- [30:AT+FLI="ABC"\r]
Dec 08 11:22:38.70: [25208]: --> [2:OK]
Dec 08 11:22:38.71: [25208]: DIAL 5551111
Dec 08 11:22:38.71: [25208]: <-- [14:ATDT9W5551111\r]
Dec 08 11:22:53.82: [25208]: --> [4:+FCO]
Dec 08 11:22:57.26: [25208]: --> [27:+FCI:"        416 555 1111"]
Dec 08 11:22:57.26: [25208]: REMOTE CSI "416 555 1111"
Dec 08 11:22:57.26: [25208]: --> [20:+FIS:1,5,1,2,1,0,1,4]
Dec 08 11:22:57.26: [25208]: --> [2:OK]
Dec 08 11:22:57.26: [25208]: REMOTE best rate 14400 bit/s
Dec 08 11:22:57.27: [25208]: REMOTE max page width 2048 pixels in 255 mm
Dec 08 11:22:57.27: [25208]: REMOTE max unlimited page length
Dec 08 11:22:57.27: [25208]: REMOTE best vres 7.7 line/mm
Dec 08 11:22:57.27: [25208]: REMOTE best format 2-D MR
Dec 08 11:22:57.27: [25208]: REMOTE best 20 ms, 10 ms/scanline
Dec 08 11:22:57.27: [25208]: USE 14400 bit/s
Dec 08 11:22:57.27: [25208]: USE 20 ms, 10 ms/scanline
Dec 08 11:22:57.27: [25208]: SEND file "docq/doc33.cover;30"
Dec 08 11:22:57.27: [25208]: USE page width 1728 pixels in 215 mm
Dec 08 11:22:57.27: [25208]: USE unlimited page length
Dec 08 11:22:57.27: [25208]: USE 3.85 line/mm
Dec 08 11:22:57.27: [25208]: USE 1-D MR
Dec 08 11:22:57.27: [25208]: <-- [23:AT+FIS=0,5,0,2,0,0,0,4\r]
Dec 08 11:22:57.54: [25208]: --> [2:OK]
Dec 08 11:22:57.54: [25208]: <-- [7:AT+FDT\r]
Dec 08 11:22:57.86: [25208]: --> [20:+FCS:0,5,0,2,0,0,0,4]
Dec 08 11:23:04.38: [25208]: --> [7:CONNECT]
Dec 08 11:23:04.38: [25208]: SEND begin page
Dec 08 11:23:04.39: [25208]: <-- data [1027]
Dec 08 11:23:04.39: [25208]: <-- data [1030]
Dec 08 11:23:04.39: [25208]: <-- data [1045]
Dec 08 11:23:04.39: [25208]: <-- data [1030]
Dec 08 11:23:04.39: [25208]: <-- data [1041]
Dec 08 11:23:04.39: [25208]: <-- data [1035]
Dec 08 11:23:04.39: [25208]: <-- data [1056]
Dec 08 11:23:04.39: [25208]: <-- data [1034]
Dec 08 11:23:04.54: [25208]: <-- data [1049]
Dec 08 11:23:04.54: [25208]: <-- data [1038]
Dec 08 11:23:04.55: [25208]: <-- data [1044]
Dec 08 11:23:04.55: [25208]: <-- data [1025]
Dec 08 11:23:05.28: [25208]: <-- data [402]
Dec 08 11:23:05.28: [25208]: SENT 12690 bytes of data
Dec 08 11:23:05.28: [25208]: SEND 1D RTC
Dec 08 11:23:05.28: [25208]: <-- data [9]
Dec 08 11:23:05.29: [25208]: SEND end page
Dec 08 11:23:05.29: [25208]: SEND send MPS (more pages, same document)
Dec 08 11:23:05.29: [25208]: <-- data [2]
Dec 08 11:23:40.65: [25208]: --> [7:+FHS:52]
Dec 08 11:23:40.65: [25208]: REMOTE HANGUP: No response to MPS repeated 3
times (code 52)
Dec 08 11:23:40.66: [25208]: <-- [5:ATH0\r]
Dec 08 11:23:40.79: [25208]: --> [2:OK]
Dec 08 11:23:40.80: [25208]: SESSION END