Re: flexfax: US Robotics 56K Pro Msg Ext Modem (config file)

[Nico Kadel-Garcia <raoul@cirl.meei.harvard.edu>]

-----BEGIN PGP SIGNED MESSAGE-----

On Fri, 13 Nov 1998, Bachir Amghar wrote:

> I try to use HylaFAXv4.0pl1 with a <US Robotics 56K Pro Msg Ext 12.2.5>
> modem... but i havn't the complete documentation of this hardware...
> also it's too difficult to make a complete config file for this modem...
> can you help me, please ?...
> have you an example of config file for this hardware or similar ?...


First, go to version 4.0pl2 and install the security patches. There
are some at http://cirl.meei.harvard.edu/hylafax/patches, and they are
already in the RPM available at
ftp://sunsite.unc.edu/pub/Linux/distributions/Linux/redhat/contrib/manhattan/
if you are using Linux.



			Nico Kadel-Garcia
			Senior Engineer, CIRL 
			Mass. Eye and Ear Infirmary
			raoul@cirl.meei.harvard.edu

-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNkx/+T/+ItycgIJRAQFD+QP/aJ4uj/pukmr75B2cZBiVm/R1JbvE5aPB
we8+uuEGiRpXJhAyQn9vrId3x0rD8gseUg4Fx7oEoiWwH4iChPtt05f+n2ejCD2+
f5vjIaITanZ/nKJdnMdrlMnGvFQO3XEzVUc/mGKw/38+ql9JEGsu2Whd96drYL7d
52cxHuEUohQ=
=4kcv
-----END PGP SIGNATURE-----